[PATCH 5/5] doc: board/qualcomm: Update RDP flashing instructions
Varadarajan Narayanan via U-Boot <[email protected]>
| Newsgroups | org.u-boot-project.lists.u-boot |
|---|---|
| Message-ID | <[email protected]> |
Update the flashing instructions to include fastboot. Signed-off-by: Varadarajan Narayanan <[email protected]> --- doc/board/qualcomm/rdp.rst | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/doc/board/qualcomm/rdp.rst b/doc/board/qualcomm/rdp.rst index 99cf8eba57c..fb3fde7c381 100644 --- a/doc/board/qualcomm/rdp.rst +++ b/doc/board/qualcomm/rdp.rst @@ -42,6 +42,22 @@ on your device with:: U-Boot should be running after a reboot (``reset``). +This board is capable of network connectivity over ethernet. However, the +relevant network driver is not available yet for U-Boot. To restore the +original U-Boot or flash modified versions of the above built U-Boot, 'fastboot' +can be used. + + => setenv serial# ipq9574 + => fastboot usb 0 + + C:\>.\fastboot.exe devices + ipq9574 fastboot + + C:\>.\fastboot flash 0:APPSBL u-boot.mbn + Sending '0:APPSBL' (620 KB) OKAY [ 0.042s] + Writing '0:APPSBL' OKAY [ 0.030s] + Finished. Total time: 0.342s + .. WARNING Boards with newer software versions would automatically go the emergency download (EDL) mode if U-Boot is not functioning as expected. If its a -- 2.34.1