[GIT PULL] Please pull fsl-qoriq-for-2026.10-rc3 for main

Peng Fan <[email protected]>
Newsgroups org.u-boot-project.lists.u-boot
Message-ID <[email protected]>
Hi Tom,

Please pull fsl-qoriq-for-2026.10-rc3 for main

---------------------------------------------------------
- Add support for vendor protocol IDs 0x81 for SCMI
- Fix LDO selector boundaries and make the driver fail gracefully when the
- regulators DT node is absent for TPS65219 PMIC/Regulator: 
- Fix a hotplug issue with pci_iommu_extra on Layerscape platforms for
  PCIe Layerscape.
- Fix a GIC LPI table corruption on LS1028A boards with 2 GiB of RAM caused
  by an unbounded TF-A DRAM bank loop and an integer underflow when
  gd->arch.resv_ram is inadvertently left at zero due to empty DRAM banks.
- Also includes a minor DT cosmetic cleanup.
---------------------------------------------------------

CI: https://git.u-boot-project.org/u-boot/custodians/u-boot-fsl-qoriq/-/pipelines/946

CI 1hr timeout, I ran build in my local host and pass.

Thanks
Peng

The following changes since commit 36c377b9859ffb53eb1e39ea31e8d96d1e0fe1e5:

  Prepare v2026.10-rc2 (2026-08-10 16:43:34 -0600)

are available in the Git repository at:

  https://git.u-boot-project.org/u-boot/custodians/u-boot-fsl-qoriq.git tags/fsl-qoriq-for-2026.10-rc3

for you to fetch changes up to 5a32ebc96295795a7325d6cbaa2d8b0bdfaa6d75:

  armv8: layerscape: Fix TF-A DRAM reservation with empty banks (2026-08-11 16:05:24 +0800)

----------------------------------------------------------------
Kumara Bhimeswararao Matsa (2):
      power: pmic: tps65219: fail if regulators node is missing
      power: regulator: tps65219: Fix LDO selector boundaries

Michal Simek (2):
      cmd: scmi: Show names for vendor protocols 0x80 and 0x82
      firmware: scmi: Support probe vendor ID 0x81

Patryk Biel (1):
      armv8: layerscape: Fix TF-A DRAM reservation with empty banks

Udit Kumar (1):
      scmi: pinctrl: Rename SCMI_PIN_DEFUALT to SCMI_PIN_DEFAULT

Vincent Jardin (2):
      arm: dts: layerscape: drop leading zeros from unit addresses
      pci: layerscape: fix pci_iommu_extra hotplug

 arch/arm/cpu/armv8/fsl-layerscape/cpu.c            | 33 ++++++++++++++--------
 arch/arm/cpu/armv8/fsl-layerscape/soc.c            |  5 ++++
 .../dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi   |  8 +++---
 arch/arm/dts/fsl-ls1028a-qds.dtsi                  |  2 +-
 arch/arm/dts/fsl-ls1088a-qds.dtsi                  |  2 +-
 arch/arm/dts/fsl-lx2160a-qds.dtsi                  |  4 +--
 arch/arm/dts/fsl-sch-28021.dtsi                    |  8 +++---
 cmd/scmi.c                                         |  3 ++
 drivers/firmware/scmi/Kconfig                      |  3 ++
 drivers/firmware/scmi/scmi_agent-uclass.c          | 10 +++++++
 drivers/pci/pcie_layerscape_fixup.c                |  5 ++++
 drivers/power/pmic/tps65219.c                      |  1 +
 include/power/tps65219.h                           |  6 ++--
 include/scmi_agent-uclass.h                        |  3 ++
 include/scmi_protocols.h                           |  3 +-
 15 files changed, 69 insertions(+), 27 deletions(-)
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.