[PATCH 2/2] configs: qcom: ignore OsIndications for capsule-on-disk
Balaji Selvanathan via U-Boot <[email protected]>
| Newsgroups | org.u-boot-project.lists.u-boot |
|---|---|
| Message-ID | <20260813-qcom-capsule-dynamic-fw-images-v1-2-e595ff79496f@oss.qualcomm.com> |
Qualcomm boards apply capsule-on-disk updates from U-Boot without the OS first setting the OsIndications EFI variable that the capsule runtime normally checks. EFI_IGNORE_OSINDICATIONS makes U-Boot skip that check so an on-disk capsule is applied at boot. Set it once in the shared qcom_defconfig so the boards that include it (qcm6490, qcs615, qcs8300, qcs9100) all pick it up. Signed-off-by: Balaji Selvanathan <[email protected]> --- The option defaults to y only while EFI_RT_VOLATILE_STORE is off. This series depends on "configs: qcom_defconfig: Enable EFI variable runtime storage" [1], which turns EFI_RT_VOLATILE_STORE on, so the default no longer applies and it has to be set explicitly. Apply that patch first. [1] https://lore.kernel.org/u-boot/[email protected]/ --- configs/qcom_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig index c52f619850d..960c44b1f70 100644 --- a/configs/qcom_defconfig +++ b/configs/qcom_defconfig @@ -9,6 +9,7 @@ CONFIG_SYS_LOAD_ADDR=0xA0000000 # CONFIG_EFI_HAVE_RUNTIME_RESET is not set CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y CONFIG_EFI_CAPSULE_ON_DISK=y +CONFIG_EFI_IGNORE_OSINDICATIONS=y CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y CONFIG_BUTTON_CMD=y CONFIG_FIT=y -- 2.34.1