Re: [PATCH 1/2] colibri_vf: restore the pre-2017 text base, the BootROM refuses the low one

On Thu, Aug 13, 2026 at 05:07:25PM +0200, Mehmet Fide wrote:
> From: Mehmet Fide <[email protected]>
> 
> Since commit c0f432c37780 ("configs: vf610: increase maximum size and
> enforce correct limit") U-Boot for the Vybrid boards links at 0x3f401000, right
> at the start of the OCRAM gfxRAM area. On a Colibri VF50 the BootROM
> does not start such an image from NAND at all: the module drops into
> the serial downloader, verified by the 0x23454523 UART association
> pattern echoing back. The WinCE-era Toradex loader dies the same way
> when handed such an image with its flashloader command. Relinking the
> same tree at 0x3f408000, the value used before that commit and by the
> vendor fork since, boots through both paths.
> 
> The low 28 KiB of the gfxRAM area are evidently not usable as a load
> address for the ROM, so give them back and correct the size limit to
> match (0x3f480000 - 0x3f408000).
> 
> Tested on a Colibri VF50 128MB IT V1.2B on an Iris carrier: cold boot
> from NAND, both text bases, one build apart.
> 
> Fixes: c0f432c37780 ("configs: vf610: increase maximum size and enforce correct limit")
> Signed-off-by: Mehmet Fide <[email protected]>

Stefan: do you remember any of this? any comment?

Unless Stefan says anything against this change, I am ok with it. But I
really have no idea about it, I trust your analysis Mehmet.

Acked-by: Francesco Dolcini <[email protected]>