Re: [PATCH v2 1/8] pinctrl: Add compact Nomadik pin controller

On Mon, Aug 17, 2026 at 11:31:50AM +0200, Linus Walleij wrote:
> Add the minimal pin control support needed to consume default states from
> the upstream DB8500 device trees. Resolve the nine Nomadik GPIO banks
> through nomadik-gpio-chips and apply the mux, direction, value, pull and
> low-EMI settings directly to their registers.
> 
> Only the DB8500 binding and default-state configuration needed by
> U-Boot are supported. There is no GPIO ownership or sleep-state
> handling.
> 
> Signed-off-by: Linus Walleij <[email protected]>
> ---
>  MAINTAINERS                       |   1 +
>  arch/arm/Kconfig                  |   2 +
>  drivers/pinctrl/Kconfig           |   7 ++
>  drivers/pinctrl/Makefile          |   1 +
>  drivers/pinctrl/pinctrl-nomadik.c | 235 ++++++++++++++++++++++++++++++++++++++
>  5 files changed, 246 insertions(+)
> 
> [....]
> diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c
> new file mode 100644
> index 000000000000..56ec7edcca48
> --- /dev/null
> +++ b/drivers/pinctrl/pinctrl-nomadik.c
> @@ -0,0 +1,235 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/* Copyright (C) 2026 Linus Walleij <[email protected]> */
> +
> +#include <dm.h>
> +#include <dm/pinctrl.h>
> +#include <vsprintf.h>
> +#include <asm/io.h>
> +
> +#define NMK_GPIO_BANKS		9
> +#define NMK_GPIO_PER_BANK	32
> +
> +#define NMK_INPUT_NOPULL	0
> +#define NMK_INPUT_PULLUP	1
> +#define NMK_INPUT_PULLDOWN	2
> +#define NMK_OUTPUT_LOW		0
> +#define NMK_OUTPUT_HIGH		1

Can we somehow reuse the defines in
dts/upstream/include/dt-bindings/pinctrl/nomadik.h for this?

Looks fine to me otherwise!

Thanks,
Stephan