[PATCH 1/2] pinctrl: meson: a1: Use gpio regs for ds

On newer SoCs, the drivestrength registers are included with the rest of
the GPIO registers. Linux has a rather complex system that uses a helper
function to fix up the registers for each SoC before registering the
pinctrl. Instead of that, just fix things up in probe.

This silences warnings like

meson-s4-pinctrl pinctrl@4000: drive-strength-microamp not supported

which I encountered on s4 and which I assume affects a1 as well.

Signed-off-by: Sean Anderson <[email protected]>
---

 drivers/pinctrl/meson/pinctrl-meson-a1.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/meson/pinctrl-meson-a1.c b/drivers/pinctrl/meson/pinctrl-meson-a1.c
index 7e9ac6390b1..e9a7522ce50 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-a1.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-a1.c
@@ -856,11 +856,21 @@ static const struct udevice_id meson_a1_pinctrl_match[] = {
 	{ },
 };
 
+static int meson_a1_pinctrl_probe(struct udevice *dev)
+{
+	struct meson_pinctrl *priv = dev_get_priv(dev);
+	int ret = meson_pinctrl_probe(dev);
+
+	if (!ret)
+		priv->reg_ds = priv->reg_gpio;
+	return ret;
+}
+
 U_BOOT_DRIVER(meson_a1_pinctrl) = {
 	.name	= "meson-a1-pinctrl",
 	.id	= UCLASS_PINCTRL,
 	.of_match = of_match_ptr(meson_a1_pinctrl_match),
-	.probe = meson_pinctrl_probe,
+	.probe = meson_a1_pinctrl_probe,
 	.priv_auto = sizeof(struct meson_pinctrl),
 	.ops = &meson_axg_pinctrl_ops,
 };
---
base-commit: d3e8597e46b635ec556a057bc42f0b0859654bdf
branch: s4_pinctrl

-- 
2.53.0