Re: [PATCH v2 0/4] i2c/clk: spacemit: k1: fix I2C bus configuration and clock handling

Hello Yao Zi, Junhui Liu,

On 18.08.26 08:53, Yao Zi wrote:
> On Sat, Aug 15, 2026 at 11:40:20AM +0800, Junhui Liu wrote:
>> Fix two issues in the SpacemiT K1 I2C driver and clock provider.
>>
>> The first issue is that the controller bus mode is selected using the
>> functional clock rate instead of the requested I2C bus speed from the
>> device tree.
>>
>> The second issue is that the TWSI functional clocks incorrectly include
>> the bus clock enable bit in their gate masks. As a result the I2C driver
>> can operate with only the functional clock enabled, which diverges from
>> the device tree description and the Linux driver (both expect separate
>> "func" and "bus" clocks).
>>
>> To fix the second issue without breaking intermediate states, the
>> patches are ordered as follows:
>>
>> - First add the missing bus clocks (and their parent chain) to the SPL
>>    clock tree.
>> - Then update the I2C driver to acquire and enable both the functional
>>    and bus clocks by name.
>> - Finally remove the bus gate bit from the functional clock definitions
>>    (except TWSI8, whose write-only register requires the combined gate).
> 
> Personally I think it's okay to break booting in this case as long as
> you explicitly point it out. Merging the conceptually related PATCH 2
> and PATCH 4 which together fix description of TWSI controller clocks
> would make the commit description shorter and clearer. But it depends on
> you.

For me the series is okay now, if you (Junhui Liu) have not prepared a
v3 with the merge Yao Zi explained already ... I will pick v2 up for next...

Please give me feedback, what you plan, thanks!

> For the whole series,
> 
> Reviewed-by: Yao Zi <[email protected]>

Thanks!

bye,
Heiko
> 
> Regards,
> Yao Zi
> 

-- 
Nabla Software Engineering
HRB 40522 Augsburg
Phone: +49 821 45592596
E-Mail: [email protected]
Geschäftsführer : Stefano Babic