[PATCH v7 18/63] usb: dwc3: import from kernel v4.14

Anders Roxell <[email protected]>
Newsgroups org.u-boot-project.lists.u-boot
Message-ID <[email protected]>
From: Jens Wiklander <[email protected]>

Sync Linux kernel dwc3 changes from v4.13 to v4.14.

The following files are preserved across the import:
Makefile Kconfig dwc3-meson-g12a.c dwc3-meson-gxl.c dwc3-omap.c
dwc3-uniphier.c dwc3-generic.h dwc3-generic.c dwc3-generic-sti.c
dwc3-layerscape.c ti_usb_phy.c

Skipping unused files:
debugfs.c drd.c dwc3-exynos.c dwc3-haps.c dwc3-imx8mp.c dwc3-keystone.c
dwc3-octeon.c dwc3-of-simple.c dwc3-pci.c dwc3-qcom.c dwc3-qcom-legacy.c
dwc3-rtk.c dwc3-st.c dwc3-xilinx.c host.c trace.c trace.h ulpi.c

Note that this is a raw import and doesn't build.
A fixup commit at the end of the series fixes that.

List of commits: git log --oneline v4.13..v4.14
Commits imported:
551684708356 usb: dwc3: ep0: fix DMA starvation by assigning req->trb on ep0

Signed-off-by: Jens Wiklander <[email protected]>
Signed-off-by: Anders Roxell <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
---
 drivers/usb/dwc3/ep0.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 827e376bfa97..75e6cb044eb2 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -990,6 +990,8 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 					 DWC3_TRBCTL_CONTROL_DATA,
 					 true);
 
+		req->trb = &dwc->ep0_trb[dep->trb_enqueue - 1];
+
 		/* Now prepare one extra TRB to align transfer size */
 		dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr,
 					 maxpacket - rem,
@@ -1015,6 +1017,8 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 					 DWC3_TRBCTL_CONTROL_DATA,
 					 true);
 
+		req->trb = &dwc->ep0_trb[dep->trb_enqueue - 1];
+
 		/* Now prepare one extra TRB to align transfer size */
 		dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr,
 					 0, DWC3_TRBCTL_CONTROL_DATA,
@@ -1029,6 +1033,9 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 		dwc3_ep0_prepare_one_trb(dep, req->request.dma,
 				req->request.length, DWC3_TRBCTL_CONTROL_DATA,
 				false);
+
+		req->trb = &dwc->ep0_trb[dep->trb_enqueue];
+
 		ret = dwc3_ep0_start_trans(dep);
 	}
 
-- 
2.53.0
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.