[PATCH v7 27/63] usb: dwc3: import from kernel v5.2

From: Jens Wiklander <[email protected]>

Sync Linux kernel dwc3 changes from v5.1 to v5.2.

The following files are preserved across the import:
Makefile Kconfig dwc3-meson-g12a.c dwc3-meson-gxl.c dwc3-omap.c
dwc3-uniphier.c dwc3-generic.h dwc3-generic.c dwc3-generic-sti.c
dwc3-layerscape.c ti_usb_phy.c

Skipping unused files:
debugfs.c drd.c dwc3-exynos.c dwc3-haps.c dwc3-imx8mp.c dwc3-keystone.c
dwc3-octeon.c dwc3-of-simple.c dwc3-pci.c dwc3-qcom.c dwc3-qcom-legacy.c
dwc3-rtk.c dwc3-st.c dwc3-xilinx.c host.c trace.c trace.h ulpi.c

Note that this is a raw import and doesn't build.
A fixup commit at the end of the series fixes that.

List of commits: git log --oneline v5.1..v5.2
Commits imported:
2e487d280525 usb: dwc3: Rename DWC3_DCTL_LPM_ERRATA
8d791929b2fb usb: dwc3: Fix default lpm_nyet_threshold value
dd24f9b604d3 usb: dwc3: debug: Print GET_STATUS(device) tracepoint
b873e2d0ea1e usb: dwc3: Do core validation early on probe
c729969b2b69 usb: dwc3: gadget: Set lpm_capable
41a91c606e7d usb: dwc3: move synchronize_irq() out of the spinlock protected block
75ecb9dd56a7 usb: dwc3: Free resource immediately after use

Signed-off-by: Jens Wiklander <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Anders Roxell <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
---
 drivers/usb/dwc3/core.c   | 18 +++++++++++-------
 drivers/usb/dwc3/core.h   |  3 +--
 drivers/usb/dwc3/debug.h  |  3 +++
 drivers/usb/dwc3/gadget.c |  5 ++---
 4 files changed, 17 insertions(+), 12 deletions(-)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index a1b126f90261..4aff1d8dbc4f 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -828,6 +828,7 @@ static void dwc3_set_incr_burst_type(struct dwc3 *dwc)
 	ret = device_property_read_u32_array(dev,
 			"snps,incr-burst-type-adjustment", vals, ntype);
 	if (ret) {
+		kfree(vals);
 		dev_err(dev, "Error to get property\n");
 		return;
 	}
@@ -846,6 +847,8 @@ static void dwc3_set_incr_burst_type(struct dwc3 *dwc)
 		incrx_mode = INCRX_BURST_MODE;
 	}
 
+	kfree(vals);
+
 	/* Enable Undefined Length INCR Burst and Enable INCRx Burst */
 	cfg &= ~DWC3_GSBUSCFG0_INCRBRST_MASK;
 	if (incrx_mode)
@@ -893,12 +896,6 @@ static int dwc3_core_init(struct dwc3 *dwc)
 	u32			reg;
 	int			ret;
 
-	if (!dwc3_core_is_valid(dwc)) {
-		dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
-		ret = -ENODEV;
-		goto err0;
-	}
-
 	/*
 	 * Write Linux Version Code to our GUID register so it's easy to figure
 	 * out which kernel version a bug was found.
@@ -1218,7 +1215,7 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 	u8			tx_max_burst_prd;
 
 	/* default to highest possible threshold */
-	lpm_nyet_threshold = 0xff;
+	lpm_nyet_threshold = 0xf;
 
 	/* default to -3.5dB de-emphasis */
 	tx_de_emphasis = 1;
@@ -1426,6 +1423,11 @@ static int dwc3_probe(struct platform_device *pdev)
 	dwc->regs	= regs;
 	dwc->regs_size	= resource_size(&dwc_res);
 
+	if (!dwc3_core_is_valid(dwc)) {
+		dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
+		return -ENODEV;
+	}
+
 	dwc3_get_properties(dwc);
 
 	dwc->reset = devm_reset_control_get_optional_shared(dev, NULL);
@@ -1600,6 +1602,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
 		spin_lock_irqsave(&dwc->lock, flags);
 		dwc3_gadget_suspend(dwc);
 		spin_unlock_irqrestore(&dwc->lock, flags);
+		synchronize_irq(dwc->irq_gadget);
 		dwc3_core_exit(dwc);
 		break;
 	case DWC3_GCTL_PRTCAP_HOST:
@@ -1632,6 +1635,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
 			spin_lock_irqsave(&dwc->lock, flags);
 			dwc3_gadget_suspend(dwc);
 			spin_unlock_irqrestore(&dwc->lock, flags);
+			synchronize_irq(dwc->irq_gadget);
 		}
 
 		dwc3_otg_exit(dwc);
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 1528d395b156..f19cbeb01087 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -406,8 +406,7 @@
 #define DWC3_DCTL_TRGTULST_SS_INACT	(DWC3_DCTL_TRGTULST(6))
 
 /* These apply for core versions 1.94a and later */
-#define DWC3_DCTL_LPM_ERRATA_MASK	DWC3_DCTL_LPM_ERRATA(0xf)
-#define DWC3_DCTL_LPM_ERRATA(n)		((n) << 20)
+#define DWC3_DCTL_NYET_THRES(n)		(((n) & 0xf) << 20)
 
 #define DWC3_DCTL_KEEP_CONNECT		BIT(19)
 #define DWC3_DCTL_L1_HIBER_EN		BIT(18)
diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h
index 6759a7efd8d5..068259fdfb0c 100644
--- a/drivers/usb/dwc3/debug.h
+++ b/drivers/usb/dwc3/debug.h
@@ -250,6 +250,9 @@ static inline void dwc3_decode_get_status(__u8 t, __u16 i, __u16 l, char *str,
 		size_t size)
 {
 	switch (t & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		snprintf(str, size, "Get Device Status(Length = %d)", l);
+		break;
 	case USB_RECIP_INTERFACE:
 		snprintf(str, size, "Get Interface Status(Intf = %d, Length = %d)",
 				i, l);
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index e293400cc6e9..d67655384eb2 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2863,7 +2863,7 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
 				"LPM Erratum not available on dwc3 revisions < 2.40a\n");
 
 		if (dwc->has_lpm_erratum && dwc->revision >= DWC3_REVISION_240A)
-			reg |= DWC3_DCTL_LPM_ERRATA(dwc->lpm_nyet_threshold);
+			reg |= DWC3_DCTL_NYET_THRES(dwc->lpm_nyet_threshold);
 
 		dwc3_writel(dwc->regs, DWC3_DCTL, reg);
 	} else {
@@ -3301,6 +3301,7 @@ int dwc3_gadget_init(struct dwc3 *dwc)
 	dwc->gadget.sg_supported	= true;
 	dwc->gadget.name		= "dwc3-gadget";
 	dwc->gadget.is_otg		= dwc->dr_mode == USB_DR_MODE_OTG;
+	dwc->gadget.lpm_capable		= true;
 
 	/*
 	 * FIXME We might be setting max_speed to <SUPER, however versions
@@ -3384,8 +3385,6 @@ int dwc3_gadget_suspend(struct dwc3 *dwc)
 	dwc3_disconnect_gadget(dwc);
 	__dwc3_gadget_stop(dwc);
 
-	synchronize_irq(dwc->irq_gadget);
-
 	return 0;
 }
 
-- 
2.53.0