[PATCH v7 52/63] usb: dwc3: import from kernel v6.7

Anders Roxell <[email protected]>
Newsgroups org.u-boot-project.lists.u-boot
Message-ID <[email protected]> 
From: Jens Wiklander <[email protected]>

Sync Linux kernel dwc3 changes from v6.6 to v6.7.

The following files are preserved across the import:
Makefile Kconfig dwc3-meson-g12a.c dwc3-meson-gxl.c dwc3-omap.c
dwc3-uniphier.c dwc3-generic.h dwc3-generic.c dwc3-generic-sti.c
dwc3-layerscape.c ti_usb_phy.c

Skipping unused files:
debugfs.c drd.c dwc3-exynos.c dwc3-haps.c dwc3-imx8mp.c dwc3-keystone.c
dwc3-octeon.c dwc3-of-simple.c dwc3-pci.c dwc3-qcom.c dwc3-qcom-legacy.c
dwc3-rtk.c dwc3-st.c dwc3-xilinx.c host.c trace.c trace.h ulpi.c

Note that this is a raw import and doesn't build.
A fixup commit at the end of the series fixes that.

List of commits: git log --oneline v6.6..v6.7
Commits imported:
8bbae288a85a usb: dwc3: set the dma max_seg_size
97789b93b792 usb: dwc3: add optional PHY interface clocks
e24bc293a6a6 usb: dwc3: document gfladj_refclk_lpm_sel field
e72fc8d6a12a usb: dwc3: core: configure TX/RX threshold for DWC3_IP

Signed-off-by: Jens Wiklander <[email protected]>
Signed-off-by: Anders Roxell <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
---
 drivers/usb/dwc3/core.c | 190 ++++++++++++++++++++++++++++++++--------
 drivers/usb/dwc3/core.h |  19 ++++
 2 files changed, 173 insertions(+), 36 deletions(-)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 343d2570189f..b101dbf8c5dc 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -854,8 +854,20 @@ static int dwc3_clk_enable(struct dwc3 *dwc)
 	if (ret)
 		goto disable_ref_clk;
 
+	ret = clk_prepare_enable(dwc->utmi_clk);
+	if (ret)
+		goto disable_susp_clk;
+
+	ret = clk_prepare_enable(dwc->pipe_clk);
+	if (ret)
+		goto disable_utmi_clk;
+
 	return 0;
 
+disable_utmi_clk:
+	clk_disable_unprepare(dwc->utmi_clk);
+disable_susp_clk:
+	clk_disable_unprepare(dwc->susp_clk);
 disable_ref_clk:
 	clk_disable_unprepare(dwc->ref_clk);
 disable_bus_clk:
@@ -865,6 +877,8 @@ disable_bus_clk:
 
 static void dwc3_clk_disable(struct dwc3 *dwc)
 {
+	clk_disable_unprepare(dwc->pipe_clk);
+	clk_disable_unprepare(dwc->utmi_clk);
 	clk_disable_unprepare(dwc->susp_clk);
 	clk_disable_unprepare(dwc->ref_clk);
 	clk_disable_unprepare(dwc->bus_clk);
@@ -1094,6 +1108,111 @@ static void dwc3_set_power_down_clk_scale(struct dwc3 *dwc)
 	}
 }
 
+static void dwc3_config_threshold(struct dwc3 *dwc)
+{
+	u32 reg;
+	u8 rx_thr_num;
+	u8 rx_maxburst;
+	u8 tx_thr_num;
+	u8 tx_maxburst;
+
+	/*
+	 * Must config both number of packets and max burst settings to enable
+	 * RX and/or TX threshold.
+	 */
+	if (!DWC3_IP_IS(DWC3) && dwc->dr_mode == USB_DR_MODE_HOST) {
+		rx_thr_num = dwc->rx_thr_num_pkt_prd;
+		rx_maxburst = dwc->rx_max_burst_prd;
+		tx_thr_num = dwc->tx_thr_num_pkt_prd;
+		tx_maxburst = dwc->tx_max_burst_prd;
+
+		if (rx_thr_num && rx_maxburst) {
+			reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG);
+			reg |= DWC31_RXTHRNUMPKTSEL_PRD;
+
+			reg &= ~DWC31_RXTHRNUMPKT_PRD(~0);
+			reg |= DWC31_RXTHRNUMPKT_PRD(rx_thr_num);
+
+			reg &= ~DWC31_MAXRXBURSTSIZE_PRD(~0);
+			reg |= DWC31_MAXRXBURSTSIZE_PRD(rx_maxburst);
+
+			dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg);
+		}
+
+		if (tx_thr_num && tx_maxburst) {
+			reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG);
+			reg |= DWC31_TXTHRNUMPKTSEL_PRD;
+
+			reg &= ~DWC31_TXTHRNUMPKT_PRD(~0);
+			reg |= DWC31_TXTHRNUMPKT_PRD(tx_thr_num);
+
+			reg &= ~DWC31_MAXTXBURSTSIZE_PRD(~0);
+			reg |= DWC31_MAXTXBURSTSIZE_PRD(tx_maxburst);
+
+			dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg);
+		}
+	}
+
+	rx_thr_num = dwc->rx_thr_num_pkt;
+	rx_maxburst = dwc->rx_max_burst;
+	tx_thr_num = dwc->tx_thr_num_pkt;
+	tx_maxburst = dwc->tx_max_burst;
+
+	if (DWC3_IP_IS(DWC3)) {
+		if (rx_thr_num && rx_maxburst) {
+			reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG);
+			reg |= DWC3_GRXTHRCFG_PKTCNTSEL;
+
+			reg &= ~DWC3_GRXTHRCFG_RXPKTCNT(~0);
+			reg |= DWC3_GRXTHRCFG_RXPKTCNT(rx_thr_num);
+
+			reg &= ~DWC3_GRXTHRCFG_MAXRXBURSTSIZE(~0);
+			reg |= DWC3_GRXTHRCFG_MAXRXBURSTSIZE(rx_maxburst);
+
+			dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg);
+		}
+
+		if (tx_thr_num && tx_maxburst) {
+			reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG);
+			reg |= DWC3_GTXTHRCFG_PKTCNTSEL;
+
+			reg &= ~DWC3_GTXTHRCFG_TXPKTCNT(~0);
+			reg |= DWC3_GTXTHRCFG_TXPKTCNT(tx_thr_num);
+
+			reg &= ~DWC3_GTXTHRCFG_MAXTXBURSTSIZE(~0);
+			reg |= DWC3_GTXTHRCFG_MAXTXBURSTSIZE(tx_maxburst);
+
+			dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg);
+		}
+	} else {
+		if (rx_thr_num && rx_maxburst) {
+			reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG);
+			reg |= DWC31_GRXTHRCFG_PKTCNTSEL;
+
+			reg &= ~DWC31_GRXTHRCFG_RXPKTCNT(~0);
+			reg |= DWC31_GRXTHRCFG_RXPKTCNT(rx_thr_num);
+
+			reg &= ~DWC31_GRXTHRCFG_MAXRXBURSTSIZE(~0);
+			reg |= DWC31_GRXTHRCFG_MAXRXBURSTSIZE(rx_maxburst);
+
+			dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg);
+		}
+
+		if (tx_thr_num && tx_maxburst) {
+			reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG);
+			reg |= DWC31_GTXTHRCFG_PKTCNTSEL;
+
+			reg &= ~DWC31_GTXTHRCFG_TXPKTCNT(~0);
+			reg |= DWC31_GTXTHRCFG_TXPKTCNT(tx_thr_num);
+
+			reg &= ~DWC31_GTXTHRCFG_MAXTXBURSTSIZE(~0);
+			reg |= DWC31_GTXTHRCFG_MAXTXBURSTSIZE(tx_maxburst);
+
+			dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg);
+		}
+	}
+}
+
 /**
  * dwc3_core_init - Low-level initialization of DWC3 Core
  * @dwc: Pointer to our controller context structure
@@ -1246,42 +1365,7 @@ static int dwc3_core_init(struct dwc3 *dwc)
 		dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
 	}
 
-	/*
-	 * Must config both number of packets and max burst settings to enable
-	 * RX and/or TX threshold.
-	 */
-	if (!DWC3_IP_IS(DWC3) && dwc->dr_mode == USB_DR_MODE_HOST) {
-		u8 rx_thr_num = dwc->rx_thr_num_pkt_prd;
-		u8 rx_maxburst = dwc->rx_max_burst_prd;
-		u8 tx_thr_num = dwc->tx_thr_num_pkt_prd;
-		u8 tx_maxburst = dwc->tx_max_burst_prd;
-
-		if (rx_thr_num && rx_maxburst) {
-			reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG);
-			reg |= DWC31_RXTHRNUMPKTSEL_PRD;
-
-			reg &= ~DWC31_RXTHRNUMPKT_PRD(~0);
-			reg |= DWC31_RXTHRNUMPKT_PRD(rx_thr_num);
-
-			reg &= ~DWC31_MAXRXBURSTSIZE_PRD(~0);
-			reg |= DWC31_MAXRXBURSTSIZE_PRD(rx_maxburst);
-
-			dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg);
-		}
-
-		if (tx_thr_num && tx_maxburst) {
-			reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG);
-			reg |= DWC31_TXTHRNUMPKTSEL_PRD;
-
-			reg &= ~DWC31_TXTHRNUMPKT_PRD(~0);
-			reg |= DWC31_TXTHRNUMPKT_PRD(tx_thr_num);
-
-			reg &= ~DWC31_MAXTXBURSTSIZE_PRD(~0);
-			reg |= DWC31_MAXTXBURSTSIZE_PRD(tx_maxburst);
-
-			dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg);
-		}
-	}
+	dwc3_config_threshold(dwc);
 
 	return 0;
 
@@ -1417,6 +1501,10 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 	u8			lpm_nyet_threshold;
 	u8			tx_de_emphasis;
 	u8			hird_threshold;
+	u8			rx_thr_num_pkt = 0;
+	u8			rx_max_burst = 0;
+	u8			tx_thr_num_pkt = 0;
+	u8			tx_max_burst = 0;
 	u8			rx_thr_num_pkt_prd = 0;
 	u8			rx_max_burst_prd = 0;
 	u8			tx_thr_num_pkt_prd = 0;
@@ -1479,6 +1567,14 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 				"snps,usb2-lpm-disable");
 	dwc->usb2_gadget_lpm_disable = device_property_read_bool(dev,
 				"snps,usb2-gadget-lpm-disable");
+	device_property_read_u8(dev, "snps,rx-thr-num-pkt",
+				&rx_thr_num_pkt);
+	device_property_read_u8(dev, "snps,rx-max-burst",
+				&rx_max_burst);
+	device_property_read_u8(dev, "snps,tx-thr-num-pkt",
+				&tx_thr_num_pkt);
+	device_property_read_u8(dev, "snps,tx-max-burst",
+				&tx_max_burst);
 	device_property_read_u8(dev, "snps,rx-thr-num-pkt-prd",
 				&rx_thr_num_pkt_prd);
 	device_property_read_u8(dev, "snps,rx-max-burst-prd",
@@ -1560,6 +1656,12 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 
 	dwc->hird_threshold = hird_threshold;
 
+	dwc->rx_thr_num_pkt = rx_thr_num_pkt;
+	dwc->rx_max_burst = rx_max_burst;
+
+	dwc->tx_thr_num_pkt = tx_thr_num_pkt;
+	dwc->tx_max_burst = tx_max_burst;
+
 	dwc->rx_thr_num_pkt_prd = rx_thr_num_pkt_prd;
 	dwc->rx_max_burst_prd = rx_max_burst_prd;
 
@@ -1785,6 +1887,20 @@ static int dwc3_get_clocks(struct dwc3 *dwc)
 		}
 	}
 
+	/* specific to Rockchip RK3588 */
+	dwc->utmi_clk = devm_clk_get_optional(dev, "utmi");
+	if (IS_ERR(dwc->utmi_clk)) {
+		return dev_err_probe(dev, PTR_ERR(dwc->utmi_clk),
+				"could not get utmi clock\n");
+	}
+
+	/* specific to Rockchip RK3588 */
+	dwc->pipe_clk = devm_clk_get_optional(dev, "pipe");
+	if (IS_ERR(dwc->pipe_clk)) {
+		return dev_err_probe(dev, PTR_ERR(dwc->pipe_clk),
+				"could not get pipe clock\n");
+	}
+
 	return 0;
 }
 
@@ -1918,6 +2034,8 @@ static int dwc3_probe(struct platform_device *pdev)
 
 	pm_runtime_put(dev);
 
+	dma_set_max_seg_size(dev, UINT_MAX);
+
 	return 0;
 
 err_exit_debugfs:
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index a69ac67d89fe..efe6caf4d0e8 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -211,6 +211,11 @@
 #define DWC3_GRXTHRCFG_RXPKTCNT(n) (((n) & 0xf) << 24)
 #define DWC3_GRXTHRCFG_PKTCNTSEL BIT(29)
 
+/* Global TX Threshold Configuration Register */
+#define DWC3_GTXTHRCFG_MAXTXBURSTSIZE(n) (((n) & 0xff) << 16)
+#define DWC3_GTXTHRCFG_TXPKTCNT(n) (((n) & 0xf) << 24)
+#define DWC3_GTXTHRCFG_PKTCNTSEL BIT(29)
+
 /* Global RX Threshold Configuration Register for DWC_usb31 only */
 #define DWC31_GRXTHRCFG_MAXRXBURSTSIZE(n)	(((n) & 0x1f) << 16)
 #define DWC31_GRXTHRCFG_RXPKTCNT(n)		(((n) & 0x1f) << 21)
@@ -991,6 +996,8 @@ struct dwc3_scratchpad_array {
  * @bus_clk: clock for accessing the registers
  * @ref_clk: reference clock
  * @susp_clk: clock used when the SS phy is in low power (S3) state
+ * @utmi_clk: clock used for USB2 PHY communication
+ * @pipe_clk: clock used for USB3 PHY communication
  * @reset: reset control
  * @regs: base address for our registers
  * @regs_size: address space size
@@ -1045,6 +1052,10 @@ struct dwc3_scratchpad_array {
  * @test_mode_nr: test feature selector
  * @lpm_nyet_threshold: LPM NYET response threshold
  * @hird_threshold: HIRD threshold
+ * @rx_thr_num_pkt: USB receive packet count
+ * @rx_max_burst: max USB receive burst size
+ * @tx_thr_num_pkt: USB transmit packet count
+ * @tx_max_burst: max USB transmit burst size
  * @rx_thr_num_pkt_prd: periodic ESS receive packet count
  * @rx_max_burst_prd: max periodic ESS receive burst size
  * @tx_thr_num_pkt_prd: periodic ESS transmit packet count
@@ -1106,6 +1117,8 @@ struct dwc3_scratchpad_array {
  *			instances in park mode.
  * @parkmode_disable_hs_quirk: set if we need to disable all HishSpeed
  *			instances in park mode.
+ * @gfladj_refclk_lpm_sel: set if we need to enable SOF/ITP counter
+ *                          running based on ref_clk
  * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
  * @tx_de_emphasis: Tx de-emphasis value
  *	0	- -6dB de-emphasis
@@ -1156,6 +1169,8 @@ struct dwc3 {
 	struct clk		*bus_clk;
 	struct clk		*ref_clk;
 	struct clk		*susp_clk;
+	struct clk		*utmi_clk;
+	struct clk		*pipe_clk;
 
 	struct reset_control	*reset;
 
@@ -1273,6 +1288,10 @@ struct dwc3 {
 	u8			test_mode_nr;
 	u8			lpm_nyet_threshold;
 	u8			hird_threshold;
+	u8			rx_thr_num_pkt;
+	u8			rx_max_burst;
+	u8			tx_thr_num_pkt;
+	u8			tx_max_burst;
 	u8			rx_thr_num_pkt_prd;
 	u8			rx_max_burst_prd;
 	u8			tx_thr_num_pkt_prd;
-- 
2.53.0
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.