[PATCH] tisdk-uenv: Add instructions to load initramfs while booting linux

Add instructions to load initramfs image and update the boot command
to use the image to boot the linux kernel.

Signed-off-by: Moteen Shah <[email protected]>
---
 .../recipes-tisdk/tisdk-uenv/tisdk-uenv/uEnv.txt  | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/uEnv.txt b/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/uEnv.txt
index 0af0eef3..5ac61b34 100644
--- a/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/uEnv.txt
+++ b/meta-arago-distro/recipes-tisdk/tisdk-uenv/tisdk-uenv/uEnv.txt
@@ -7,3 +7,18 @@
 #       default on all newer U-Boot images.  This also means that some
 #       variables such as bootdelay cannot be changed by this file since
 #       it is not evaluated until the bootcmd is run.
+
+# Initramfs configuration
+# Name of the initramfs file in the boot partition
+name_initramfs=ti-core-initramfs.cpio.xz
+
+# Command to load initramfs from boot partition (mmc device:partition)
+# Adjust the device number (0 or 1) based on your setup
+# mmcdev is set to 1 by default, partition 1 is the boot partition
+get_initramfs_mmc=fatload mmc ${mmcdev}:1 ${rdaddr} ${name_initramfs}
+
+# Load initramfs and set up variables
+load_initramfs=if run get_initramfs_mmc; then setenv _initramfs ${rdaddr}:${filesize}; setenv rd_spec ${_initramfs}; echo Initramfs loaded at ${rdaddr}, size ${filesize}; else echo WARNING: Initramfs not found, continuing without initramfs; setenv rd_spec -; fi
+
+# Custom boot command that loads initramfs before kernel
+init_mmc=run args_all args_mmc load_initramfs
\ No newline at end of file
-- 
2.34.1