Re: HDMI issue on odroid xu4

Please check the mail addresses, and read what I wrote. You're just
randomly addressing mailing list mechanisms. Stop spamming.

Greetz,,
Josef

On Mon, Nov 4, 2024 at 10:09 AM Userlove Kadli <[email protected]>
wrote:

> Hi,
> Greetings of the day !
>
> I have used the odroid-xu4 board (meta-odroid) in my embedded project and
> I have used the yocto project to build the custom linux for this board and
> use Open source BSP(board support package) for this board. But i have built
> the custom linux image and flash this image on this board and run this
> custom linux on this board but it does not show hdmi output.
> Suggest me how to solve this problem and enable hdmi feature in the board
> to see custom linux output in hdmi. Now i have used for working branch is
> kirkstone (LTS)(4.0)
>
> this is reference link for odroid xu4 BSP
> https://github.com/akuster/meta-odroid.git
>
> please help me yocto community to solve this issue
>
> With regards
> Arjun kumar
>
> On Mon, 4 Nov 2024 at 14:35, Userlove Kadli <[email protected]>
> wrote:
>
>> Hi,
>> Greetings of the day !
>>
>> I have used the odroid-xu4 board (meta-odroid) in my embedded project and
>> I have used the yocto project to build the custom linux for this board and
>> use Open source BSP(board support package) for this board. But i have built
>> the custom linux image and flash this image on this board and run this
>> custom linux on this board but it does not show hdmi output.
>> Suggest me how to solve this problem and enable hdmi feature in the board
>> to see custom linux output in hdmi. Now i have used for working branch is
>> kirkstone (LTS)(4.0)
>>
>> this is reference link for odroid xu4 BSP
>> https://github.com/akuster/meta-odroid.git
>>
>> With regards
>> Arjun kumar
>>
>> On Mon, 4 Nov 2024 at 12:12, Josef Holzmayr <[email protected]>
>> wrote:
>>
>>> Hello!
>>>
>>> Thanks for reaching out. Please understand that neither of the addresses
>>> you included provides technical support. For such, please see the mailing
>>> lists and IRC channel as described at
>>> https://www.yoctoproject.org/community/get-involved/#mailing-lists. In
>>> case of questions on a specific layer, check the README file for the
>>> maintainers contact data.
>>>
>>> Greetz,
>>> Josef
>>>
>>> On Mon, Nov 4, 2024 at 6:21 AM Userlove Kadli <[email protected]>
>>> wrote:
>>>
>>>> Hi,
>>>> Greetings of the day !
>>>>
>>>> I have used the odroid-xu4 board in my embedded project and I have used
>>>> the yocto project to build the custom linux for this board and use Open
>>>> source BSP(board support package) for this board. But i have built the
>>>> custom linux image and flash this image on this board and run this
>>>> custom linux on this board but it does not show hdmi output.
>>>> Suggest me how to solve this problem and enable hdmi feature in the
>>>> board to see custom linux output in hdmi. Now i have used for working
>>>> branch is kirkstone (LTS)(4.0)
>>>>
>>>> this is reference link for odroid xu4 BSP
>>>> https://github.com/akuster/meta-odroid.git
>>>>
>>>> With regards
>>>> Arjun kumar
>>>>
>>>