Re: [meta-freescale] RPmsg in pico-imx7d using mainline linux (5.6.xx) and Yocto dunfell

Hi Neuber,

On Sun, Aug 15, 2021 at 10:50 PM Neuber Sousa <[email protected]> wrote:
>
> I have been interested in communicating between the a7 and the m4 of my imx7d-pico using RPmsg for a long time.
>
> Today I found that this tutorial:https://www.youtube.com/watch?v=4zMyjaEgj2U&t=1182s
>
> I don’t use mainline linux. I stay using kernel 5.6.xx with libgpiod 1.5

5.6 is an unsupported kernel version. It is not a good idea to develop
using such an unsupported kernel version.

Please see the supported ones at  https://www.kernel.org/

> Using libgpiod I want to press a controlled button on a7 and flash an LED (which is waiting for this command) on m4
>
>
>
> I was checking the issue link below and I have 2 questions below:
>
> https://community.nxp.com/t5/i-MX-Processors/I-cant-get-the-linux-side-of-yocto-rpmsg-example-for-imx6sx/m-p/490383
>
> 1 - How can I adapt this project:https://hub.mender.io/t/technexion-pico-pi-imx7/136/6
>
> to the nxp forum project (link above) for me to get the following files: mu.c, imx_rpmsg.c, imx_rpmsg_tty.c and/or imx_rpmsg_tty.ko

These drivers only exist on the NXP vendor kernel.

Mainline uses drivers/remoteproc/imx_rproc.c instead.