How to configure eth0 on fslc-image-network-full-cmdline

Hello,

I'm using a wandboard (rev d1) and building the fslc-image-network-full-cmdline image (honister branch). I've got ethernet wired to a switch on my home network, but I cannot figure out how to setup this build to bring up eth0 via DHCP. Any help would be appreciated. Is this image supposed to bring up eth0 right out of the box?

Build Configuration:
BB_VERSION           = "1.52.0"
BUILD_SYS            = "x86_64-linux"
NATIVELSBSTRING      = "ubuntu-20.04"
TARGET_SYS           = "arm-poky-linux-gnueabi"
MACHINE              = "wandboard"
DISTRO               = "poky"
DISTRO_VERSION       = "3.4"
TUNE_FEATURES        = "arm vfp cortexa9 neon thumb callconvention-hard"
TARGET_FPU           = "hard"
meta
meta-poky            = "HEAD:da5d1b540e052c862232f8bd464d30bb387fe86e"
meta-oe
meta-multimedia
meta-python
meta-networking      = "HEAD:ad52a41de8b4b7d619d1376d0a0090ebcfff56da"
meta-freescale       = "HEAD:ed3435620a2404c241fef3c4ef90d1f31d3b7a8a"
meta-freescale-3rdparty = "HEAD:fd3c4aa47c93b77942dfcf1ab8ded0c54cb589d5"
meta-freescale-distro = "HEAD:d2e27cc4778663450495a67bfb036cba600cb27a"

*root@wandboard:~# ifconfig*
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
inet6 fe80::21f:7bff:fe0a:90b8  prefixlen 64  scopeid 0x20<link>
ether 00:1f:7b:0a:90:b8  txqueuelen 1000  (Ethernet)
RX packets 14  bytes 1200 (1.1 KiB)
RX errors 0  dropped 0  overruns 0  frame 0
TX packets 32  bytes 6786 (6.6 KiB)
TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

*root@wandboard:~# cat /etc/network/interfaces*
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)

# The loopback interface
auto lo
iface lo inet loopback

# Wireless interfaces
iface wlan0 inet dhcp
wireless_mode managed
wireless_essid any
wpa-driver wext
wpa-conf /etc/wpa_supplicant.conf

iface atml0 inet dhcp

# Wired or wireless interfaces
auto eth0
iface eth0 inet dhcp
iface eth1 inet dhcp

# Ethernet/RNDIS gadget (g_ether)
# ... or on host side, usbnet and random hwaddr
iface usb0 inet static
address 192.168.7.2
netmask 255.255.255.0
network 192.168.7.0
gateway 192.168.7.1

# Bluetooth networking
iface bnep0 inet dhcp