Re: [meta-freescale] Anyone doing meta-freescale builds for imx93 evk yet? (imx93-11x11-lpddr4x-evk)

On Tue, Sep 5, 2023 at 4:21=E2=80=AFPM Brian Hutchinson <[email protected]=
om> wrote:
>
> Hi,
>
> I recently obtained a imx93 evk board and wanted to build fsl
> community bsp distro for it.
>
> I generated a core-image-base sdcard image using DISTRO=3Dpoky
> MACHINE=3Dimx93-11x11-lpddr4x-evk but it doesn't boot ... so sign of
> life on console ... no lights blinking, no u-boot output etc..

Do you know which is the imx-boot you are using on your image? Are you
flashing the sdcard with a .wic? using uuu?

When I tested it, I used DISTRO=3Dfslc-framebuffer.

The last time I tested it worked fine.

Daiane

>
> I just want a minimal distro that supports a serial console (via the
> USB debug cable) and networking at the moment.  On imx8mm-evk I used
> core-image-base to start work on my own custom OS so thought that
> would be a good starting point with this imx93 board too but not sure
> meta-freescale fully supports the imx93 evk yet.  I built kirkstone
> and it had machine support and everything built ok, but maybe
> something else is missing.
>
> I searched the archives and I don't see any mention of the imx93 evk yet.
>
> Thanks!
>
> Brian
>
> -=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-
> Links: You receive all messages sent to this group.
> View/Reply Online (#24924): https://lists.yoctoproject.org/g/meta-freesca=
le/message/24924
> Mute This Topic: https://lists.yoctoproject.org/mt/101177560/5992125
> Group Owner: [email protected]
> Unsubscribe: https://lists.yoctoproject.org/g/meta-freescale/unsub [daian=
[email protected]]
> -=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-
>