[meta-ti][master][PATCH] conf: machine: am62l: adjust fitImage addresses for 128MiB
Anshul Dalal <[email protected]>
| Newsgroups | org.yoctoproject.lists.meta-ti |
|---|---|
| Message-ID | <[email protected]> |
This patch modifies the load addresses for the kernel fitImage to provide out-of-box support for 128MiB DDR sizes on AM62l. The current fitImage uses 0x88000000 as the DTB load address which is beyond the 128MiB boundary while the kernel load address of 0x82000000 conflicts with U-Boot's SPL load address which causes problems when enabling falcon mode on the device. Signed-off-by: Anshul Dalal <[email protected]> --- meta-ti-bsp/conf/machine/am62lxx-evm.conf | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/meta-ti-bsp/conf/machine/am62lxx-evm.conf b/meta-ti-bsp/conf/machine/am62lxx-evm.conf index a0bccf57..d8e1614e 100644 --- a/meta-ti-bsp/conf/machine/am62lxx-evm.conf +++ b/meta-ti-bsp/conf/machine/am62lxx-evm.conf @@ -17,3 +17,10 @@ KERNEL_DEVICETREE_PREFIX = " \ KERNEL_DEVICETREE = "" UBOOT_MACHINE = "am62lx_evm_defconfig" +FIT_CONF_DEFAULT_DTB = "k3-am62l3-evm.dtb" +UBOOT_LOADADDRESS = "0x82400000" +UBOOT_ENTRYPOINT = "0x82400000" +UBOOT_RD_LOADADDRESS = "0x84000000" +UBOOT_RD_ENTRYPOINT = "0x84000000" +UBOOT_DTB_LOADADDRESS = "0x84f00000" +UBOOT_DTBO_LOADADDRESS = "0x84f80000" -- 2.52.0