[PATCH 2/2] README.hardware.md: add section on genericarm64 on qemu
| Newsgroups | org.yoctoproject.lists.poky |
|---|---|
| Message-ID | <[email protected]> |
From: Ross Burton <[email protected]> Signed-off-by: Ross Burton <[email protected]> --- meta-yocto-bsp/README.hardware.md | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/meta-yocto-bsp/README.hardware.md b/meta-yocto-bsp/README.hardware.md index a129063afa0..6045c3d8679 100644 --- a/meta-yocto-bsp/README.hardware.md +++ b/meta-yocto-bsp/README.hardware.md @@ -140,6 +140,11 @@ The genericarm64 MACHINE is currently tested on the following platforms: The images built are EFI bootable disk images and can be written directly to a SD card for booting, for example. +There is also limited support for booting a genericarm64 image inside QEMU. When +building the image also build the `u-boot` recipe to build the required +firmware (note that this firmware will _not_ boot on real hardware), then use +`runqemu` as usual. + Texas Instruments Beaglebone (beaglebone-yocto) ----------------------------------------------- -- 2.34.1