Re: [PATCH] systemd-serialgetty: disable on genericarm64

Hi Ross,

I think this patch may have slipped through while waiting for your
tty refactoring and other patches. Could this be applied now?

The issue still exists and boot time to systemd "running" state
is delayed because if these timeouts.

Cheers,

-Mikko

On Thu, Apr 24, 2025 at 02:19:32PM +0300, Mikko Rapeli wrote:
> Upstream systemd setup with udev starts agetty on detected
> tty's so there is no need to use the build time SERIAL_CONSOLES
> variable.
> 
> Trying to start agetty on non-existing tty's from SERIAL_CONSOLES
> more than doubles the boot time to systemd "running" or "degraded"
> state. Boot time before this change (core-image-base with systemd-analyze,
> qemu, aarch64 build host):
> 
> root@genericarm64:~# systemd-analyze
> Startup finished in 2.409s (firmware) + 5.116s (loader) + 10.274s (kernel) + 1min 33.887s (userspace) = 1min 51.687s
> multi-user.target reached after 1min 33.876s in userspace.
> root@genericarm64:~# journalctl -b -a|grep tty|tail -15
> Apr 24 08:51:01 genericarm64 systemd[1]: dev-ttyS1.device: Job dev-ttyS1.device/start timed out.
> Apr 24 08:51:01 genericarm64 systemd[1]: Timed out waiting for device /dev/ttyS1.
> Apr 24 08:51:01 genericarm64 systemd[1]: Dependency failed for Serial Getty on ttyS1.
> Apr 24 08:51:01 genericarm64 systemd[1]: [email protected]: Job [email protected]/start failed with result 'dependency'.
> Apr 24 08:51:01 genericarm64 systemd[1]: dev-ttyS1.device: Job dev-ttyS1.device/start failed with result 'timeout'.
> Apr 24 08:51:01 genericarm64 systemd[1]: dev-ttyS2.device: Job dev-ttyS2.device/start timed out.
> Apr 24 08:51:01 genericarm64 systemd[1]: Timed out waiting for device /dev/ttyS2.
> Apr 24 08:51:01 genericarm64 systemd[1]: Dependency failed for Serial Getty on ttyS2.
> Apr 24 08:51:01 genericarm64 systemd[1]: [email protected]: Job [email protected]/start failed with result 'dependency'.
> Apr 24 08:51:01 genericarm64 systemd[1]: dev-ttyS2.device: Job dev-ttyS2.device/start failed with result 'timeout'.
> Apr 24 08:51:01 genericarm64 systemd[1]: dev-ttyS0.device: Job dev-ttyS0.device/start timed out.
> Apr 24 08:51:01 genericarm64 systemd[1]: Timed out waiting for device /dev/ttyS0.
> Apr 24 08:51:01 genericarm64 systemd[1]: Dependency failed for Serial Getty on ttyS0.
> Apr 24 08:51:01 genericarm64 systemd[1]: [email protected]: Job [email protected]/start failed with result 'dependency'.
> Apr 24 08:51:01 genericarm64 systemd[1]: dev-ttyS0.device: Job dev-ttyS0.device/start failed with result 'timeout'.
> 
> Boot time with this change:
> 
> root@genericarm64:~# systemd-analyze
> Startup finished in 2.411s (firmware) + 5.109s (loader) + 10.208s (kernel) + 24.868s (userspace) = 42.598s
> multi-user.target reached after 24.848s in userspace.
> root@genericarm64:~# journalctl -b -a |grep tty|tail -15
> Apr 03 20:34:34 genericarm64 kernel: printk: legacy console [ttyAMA0] enabled
> Apr 03 20:34:34 genericarm64 kernel: 9040000.pl011: ttyAMA1 at MMIO 0x9040000 (irq = 14, base_baud = 0) is a PL011 rev1
> Apr 03 20:34:35 genericarm64 systemd[1]: Created slice Slice /system/getty.
> Apr 03 20:34:35 genericarm64 systemd[1]: Created slice Slice /system/serial-getty.
> Apr 03 20:34:35 genericarm64 systemd[1]: Expecting device /dev/ttyAMA0...
> Apr 03 20:34:44 genericarm64 systemd[1]: Found device /dev/ttyAMA0.
> Apr 03 20:34:51 genericarm64 kernel[349]: printk: legacy console [tty0] enabled
> Apr 03 20:34:51 genericarm64 kernel[349]: 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13, base_baud = 0) is a PL011 rev1
> Apr 03 20:34:51 genericarm64 kernel[349]: printk: legacy console [ttyAMA0] enabled
> Apr 03 20:34:51 genericarm64 kernel[349]: 9040000.pl011: ttyAMA1 at MMIO 0x9040000 (irq = 14, base_baud = 0) is a PL011 rev1
> Apr 03 20:34:52 genericarm64 systemd[1]: Started Getty on tty1.
> Apr 03 20:34:52 genericarm64 kernel[349]: systemd[1]: Created slice Slice /system/getty.
> Apr 03 20:34:52 genericarm64 kernel[349]: systemd[1]: Created slice Slice /system/serial-getty.
> Apr 03 20:34:52 genericarm64 kernel[349]: systemd[1]: Expecting device /dev/ttyAMA0...
> Apr 03 20:34:52 genericarm64 systemd[1]: Started Serial Getty on ttyAMA0.
> 
> Changing the SERIAL_CONSOLES variable with systemd init
> ("systemd" in DISTRO_FEATURES for example)
> is not possible so changing systemd-serialgetty directly.
> systemd-serialgetty is now always installed with systemd.
> 
> Signed-off-by: Mikko Rapeli <[email protected]>
> ---
>  .../recipes-core/systemd/systemd-serialgetty.bbappend         | 4 ++++
>  1 file changed, 4 insertions(+)
>  create mode 100644 meta-yocto-bsp/recipes-core/systemd/systemd-serialgetty.bbappend
> 
> diff --git a/meta-yocto-bsp/recipes-core/systemd/systemd-serialgetty.bbappend b/meta-yocto-bsp/recipes-core/systemd/systemd-serialgetty.bbappend
> new file mode 100644
> index 0000000000..9fd43259db
> --- /dev/null
> +++ b/meta-yocto-bsp/recipes-core/systemd/systemd-serialgetty.bbappend
> @@ -0,0 +1,4 @@
> +do_install:prepend:genericarm64() {
> +    # use systemd defaults to reduce boot delay from non-existing tty's
> +    exit 0
> +}
> -- 
> 2.43.0
>