Re: [yocto] Looking for Yocto-supported Reference Design
John Dowd <[email protected]> Tue, 12 May 2026 09:11:53 -0400
| Newsgroups | org.yoctoproject.lists.yocto |
|---|---|
| Message-ID | <CAHPfuSkiXX8qWuanH+sBOxXdPiDPM4-PLyf=JJ0tsUCUy95ixA@mail.gmail.com> |
David, I've started on exactly the same kind of project for my own purposes. I've been using a Raspberry Pi 0 2W for my development. I needed the wifi and BT connectivity so I started with it. Please feel free to get in touch if you have any questions. Cheers!! On Tue, May 12, 2026 at 8:13 AM Richard Purdie via lists.yoctoproject.org <[email protected]> wrote: > Hi David, > > On Mon, 2026-05-11 at 13:53 -0700, dave via lists.yoctoproject.org wrote: > > My name is David Richards and I am blind. I am new to Yocto. I > would > > like to build a portable talking e-book reader. The goal is to support > > DAISY, Audible, Kindle, and epub books. In addition, I would like to be > able > > to stream MP3 content. To that end, I am looking for a reference design > to > > base the project on. It does not require/use a display or touchpad. The > user > > interface will utilize buttons and speech output. The design should have > > existing Yocto support, if possible. > > Does anyone have any pointers for a reference design I could start > > with? > > There are many boards with OE/Yocto Project support. You can get an > idea of them all from the layer index's list of machines which is > showing 22 pages of them! > > > https://layers.openembedded.org/layerindex/branch/master/machines/?q=&browse=1 > > Some have better support than others, we've had the Beagle devices like > the BeaglePlay and earlier devices like the BeagleBone and BeagleBoard > supported as one of our test platforms for a long time. That has basic > support in meta-yocto with beaglebone-yocto and a full BSP from TI as > well. There are others like the various RaspberryPis and may more, > including more experimental ones with RISC-V processors. > > It sounds like the audio output might be important to you and however > you plan to interface the buttons to the system so that may be > something to factor in. You might need USB? That might narrow down your > choice. I'd probably try and find a board which holds interest to you > as well. > > Cheers, > > Richard > > > > > -=-=-=-=-=-=-=-=-=-=-=- > Links: You receive all messages sent to this group. > View/Reply Online (#66534): > https://lists.yoctoproject.org/g/yocto/message/66534 > Mute This Topic: https://lists.yoctoproject.org/mt/119264506/9366835 > Group Owner: [email protected] > Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [ > [email protected]] > -=-=-=-=-=-=-=-=-=-=-=- > > -- "To err is human, to forgive is not company policy." John Dowd Contract - Software Developer Cell: (613)316-7884