Re: [linux-safety] [PATCH] PCI: dwc/meson: Use PTR_ERR_OR_ZERO

On 16/11/2020 17:34, Sudip Mukherjee wrote:
> Coccinelle suggested using PTR_ERR_OR_ZERO() and looking at the code,
> we can use PTR_ERR_OR_ZERO() instead of checking IS_ERR() and then
> doing 'return 0'.
> 
> Signed-off-by: Sudip Mukherjee <[email protected]>
> ---
>  drivers/pci/controller/dwc/pci-meson.c | 8 ++------
>  1 file changed, 2 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c
> index 1913dc2c8fa0..f4261f5aceb1 100644
> --- a/drivers/pci/controller/dwc/pci-meson.c
> +++ b/drivers/pci/controller/dwc/pci-meson.c
> @@ -115,10 +115,8 @@ static int meson_pcie_get_mems(struct platform_device *pdev,
>  		return PTR_ERR(pci->dbi_base);
>  
>  	mp->cfg_base = devm_platform_ioremap_resource_byname(pdev, "cfg");
> -	if (IS_ERR(mp->cfg_base))
> -		return PTR_ERR(mp->cfg_base);
>  
> -	return 0;
> +	return PTR_ERR_OR_ZERO(mp->cfg_base);
>  }
>  
>  static int meson_pcie_power_on(struct meson_pcie *mp)
> @@ -208,10 +206,8 @@ static int meson_pcie_probe_clocks(struct meson_pcie *mp)
>  		return PTR_ERR(res->general_clk);
>  
>  	res->clk = meson_pcie_probe_clock(dev, "pclk", 0);
> -	if (IS_ERR(res->clk))
> -		return PTR_ERR(res->clk);
>  
> -	return 0;
> +	return PTR_ERR_OR_ZERO(res->clk);
>  }
>  
>  static inline u32 meson_cfg_readl(struct meson_pcie *mp, u32 reg)
> 

Hi,

This has been nacked multiple times already:
https://lore.kernel.org/linux-pci/20190527140952.GB7202@ulmo/

Neil


-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#182): https://lists.elisa.tech/g/linux-safety/message/182
Mute This Topic: https://lists.elisa.tech/mt/78295847/5278000
Group Owner: [email protected]
Unsubscribe: https://lists.elisa.tech/g/linux-safety/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-