| Newsgroups |
perl.cvs.perlfaq |
| Message-ID |
<[email protected]> |
cvsuser 02/05/23 08:49:14
Modified: . perlfaq5.pod
Log:
lots of edits here. maybe we should mix up the order of the auto-poster
so that we spread the edits out. ;)
==> How do I flush/unbuffer an output filehandle? Why must I do this?
* rewrote some of the paragraphs and switched them around to talk
more about Perl than C.
* pared the IO::Socket example to avoid discussing line endings in HTTP
and to make it consistent with other examples.
* added another idiom (thanks to Benjamin Goldberg)
* some minor nits fixed (thanks to Benjamin and Uri Guttman)
==> How can I make a filehandle local to a subroutine?
* removed most of the typeglob nonsense
* rewrote the typeglob examples to show old idioms without
excessive detail.
* replaced the typeglob stuff with autovivified handle stufff
==> How can I use a filehandle indirectly?
* two edits to fix subject-verb agreement
Revision Changes Path
1.16 +62 -124 perlfaq/perlfaq5.pod
Index: perlfaq5.pod
===================================================================
RCS file: /cvs/public/perlfaq/perlfaq5.pod,v
retrieving revision 1.15
retrieving revision 1.16
diff -u -w -r1.15 -r1.16
--- perlfaq5.pod 12 Apr 2002 02:02:05 -0000 1.15
+++ perlfaq5.pod 23 May 2002 15:49:14 -0000 1.16
@@ -1,6 +1,6 @@
=head1 NAME
-perlfaq5 - Files and Formats ($Revision: 1.15 $, $Date: 2002/04/12 02:02:05 $)
+perlfaq5 - Files and Formats ($Revision: 1.16 $, $Date: 2002/05/23 15:49:14 $)
=head1 DESCRIPTION
@@ -9,72 +9,56 @@
=head2 How do I flush/unbuffer an output filehandle? Why must I do this?
-The C standard I/O library (stdio) normally buffers characters sent to
-devices. This is done for efficiency reasons so that there isn't a
-system call for each byte. Any time you use print() or write() in
-Perl, you go though this buffering. syswrite() circumvents stdio and
-buffering.
-
-In most stdio implementations, the type of output buffering and the size of
-the buffer varies according to the type of device. Disk files are block
-buffered, often with a buffer size of more than 2k. Pipes and sockets
-are often buffered with a buffer size between 1/2 and 2k. Serial devices
-(e.g. modems, terminals) are normally line-buffered, and stdio sends
-the entire line when it gets the newline.
-
-Perl does not support truly unbuffered output (except insofar as you can
-C<syswrite(OUT, $char, 1)>). What it does instead support is "command
-buffering", in which a physical write is performed after every output
-command. This isn't as hard on your system as unbuffering, but does
-get the output where you want it when you want it.
-
-If you expect characters to get to your device when you print them there,
-you'll want to autoflush its handle.
-Use select() and the C<$|> variable to control autoflushing
-(see L<perlvar/$|> and L<perlfunc/select>):
+Perl does not support truly unbuffered output (except
+insofar as you can C<syswrite(OUT, $char, 1)>), although it
+does support is "command buffering", in which a physical
+write is performed after every output command.
+
+The C standard I/O library (stdio) normally buffers
+characters sent to devices so that there isn't a system call
+for each byte. In most stdio implementations, the type of
+output buffering and the size of the buffer varies according
+to the type of device. Perl's print() and write() functions
+normally buffer output, while syswrite() bypasses buffering
+all together.
+
+If you want your output to be sent immediately when you
+execute print() or write() (for instance, for some network
+protocols), you must set the handle's autoflush flag. This
+flag is the Perl variable $| and when it is set to a true
+value, Perl will flush the handle's buffer after each
+print() or write(). Setting $| affects buffering only for
+the currently selected default file handle. You choose this
+handle with the one argument select() call (see
+L<perlvar/$|> and L<perlfunc/select>).
+
+Use select() to choose the desired handle, then set its
+per-filehandle variables.
$old_fh = select(OUTPUT_HANDLE);
$| = 1;
select($old_fh);
-Or using the traditional idiom:
+Some idioms can handle this is a single statement:
select((select(OUTPUT_HANDLE), $| = 1)[0]);
-Or if don't mind slowly loading several thousand lines of module code
-just because you're afraid of the C<$|> variable:
-
- use FileHandle;
- open(DEV, "+</dev/tty"); # ceci n'est pas une pipe
- DEV->autoflush(1);
+ $| = 1, select $_ for select OUTPUT_HANDLE;
-or the newer IO::* modules:
+Some modules offer object-oriented access to handles and their
+variables, although they may be overkill if this is the only
+thin you do with them. You can use IO::Handle:
use IO::Handle;
open(DEV, ">/dev/printer"); # but is this?
DEV->autoflush(1);
-or even this:
+or IO::Socket:
use IO::Socket; # this one is kinda a pipe?
- $sock = IO::Socket::INET->new(PeerAddr => 'www.perl.com',
- PeerPort => 'http(80)',
- Proto => 'tcp');
- die "$!" unless $sock;
+ my $sock = IO::Socket::INET->new( 'www.example.com:80' ) ;
$sock->autoflush();
- print $sock "GET / HTTP/1.0" . "\015\012" x 2;
- $document = join('', <$sock>);
- print "DOC IS: $document\n";
-
-Note the bizarrely hard coded carriage return and newline in their octal
-equivalents. This is the ONLY way (currently) to assure a proper flush
-on all platforms, including Macintosh. That's the way things work in
-network programming: you really should specify the exact bit pattern
-on the network line terminator. In practice, C<"\n\n"> often works,
-but this is not portable.
-
-See L<perlfaq9> for other examples of fetching URLs over the web.
=head2 How do I change one line in a file/delete a line in a file/insert a line in the middle of a file/append to the beginning of a file?
@@ -172,74 +156,31 @@
=head2 How can I make a filehandle local to a subroutine? How do I pass filehandles between subroutines? How do I make an array of filehandles?
-The fastest, simplest, and most direct way is to localize the typeglob
-of the filehandle in question:
+As of perl5.6, open() autovivifies file and directory handles
+as references if you pass it an uninitialized scalar variable.
+You can then pass these references just like any other scalar,
+and use them in the place of named handles.
- local *TmpHandle;
+ open my $fh, $file_name;
-Typeglobs are fast (especially compared with the alternatives) and
-reasonably easy to use, but they also have one subtle drawback. If you
-had, for example, a function named TmpHandle(), or a variable named
-%TmpHandle, you just hid it from yourself.
-
- sub findme {
- local *HostFile;
- open(HostFile, "</etc/hosts") or die "no /etc/hosts: $!";
- local $_; # <- VERY IMPORTANT
- while (<HostFile>) {
- print if /\b127\.(0\.0\.)?1\b/;
- }
- # *HostFile automatically closes/disappears here
- }
+ open local $fh, $file_name;
-Here's how to use typeglobs in a loop to open and store a bunch of
-filehandles. We'll use as values of the hash an ordered
-pair to make it easy to sort the hash in insertion order.
-
- @names = qw(motd termcap passwd hosts);
- my $i = 0;
- foreach $filename (@names) {
- local *FH;
- open(FH, "/etc/$filename") || die "$filename: $!";
- $file{$filename} = [ $i++, *FH ];
- }
-
- # Using the filehandles in the array
- foreach $name (sort { $file{$a}[0] <=> $file{$b}[0] } keys %file) {
- my $fh = $file{$name}[1];
- my $line = <$fh>;
- print "$name $. $line";
- }
+ print $fh "Hello World!\n";
-For passing filehandles to functions, the easiest way is to
-preface them with a star, as in func(*STDIN).
-See L<perlfaq7/"Passing Filehandles"> for details.
-
-If you want to create many anonymous handles, you should check out the
-Symbol, FileHandle, or IO::Handle (etc.) modules. Here's the equivalent
-code with Symbol::gensym, which is reasonably light-weight:
-
- foreach $filename (@names) {
- use Symbol;
- my $fh = gensym();
- open($fh, "/etc/$filename") || die "open /etc/$filename: $!";
- $file{$filename} = [ $i++, $fh ];
- }
+ process_file( $fh );
-Here's using the semi-object-oriented FileHandle module, which certainly
-isn't light-weight:
+Before perl5.6, you had to deal with various typeglob idioms
+which you may see in older code.
- use FileHandle;
+ open FILE, "> $filename";
+ process_typeglob( *FILE );
+ process_reference( \*FILE );
- foreach $filename (@names) {
- my $fh = FileHandle->new("/etc/$filename") or die "$filename: $!";
- $file{$filename} = [ $i++, $fh ];
- }
+ sub process_typeglob { local *FH = shift; print FH "Typeglob!" }
+ sub process_reference { local $fh = shift; print $fh "Reference!" }
-Please understand that whether the filehandle happens to be a (probably
-localized) typeglob or an anonymous handle from one of the modules
-in no way affects the bizarre rules for managing indirect handles.
-See the next question.
+If you want to create many anonymous handles, you should
+check out the Symbol or IO::Handle modules.
=head2 How can I use a filehandle indirectly?
@@ -253,13 +194,10 @@
$fh = \*SOME_FH; # ref to typeglob (bless-able)
$fh = *SOME_FH{IO}; # blessed IO::Handle from *SOME_FH typeglob
-Or, you can use the C<new> method from the FileHandle or IO modules to
+Or, you can use the C<new> method from one of the IO::* modules to
create an anonymous filehandle, store that in a scalar variable,
and use it as though it were a normal filehandle.
- use FileHandle;
- $fh = FileHandle->new();
-
use IO::Handle; # 5.004 or higher
$fh = IO::Handle->new();
@@ -267,7 +205,7 @@
Perl is expecting a filehandle, an indirect filehandle may be used
instead. An indirect filehandle is just a scalar variable that contains
a filehandle. Functions like C<print>, C<open>, C<seek>, or
-the C<< <FH> >> diamond operator will accept either a read filehandle
+the C<< <FH> >> diamond operator will accept either a named filehandle
or a scalar variable containing one:
($ifh, $ofh, $efh) = (*STDIN, *STDOUT, *STDERR);
@@ -327,9 +265,9 @@
calls doesn't work for the diamond operator. That's because it's a
real operator, not just a function with a comma-less argument. Assuming
you've been storing typeglobs in your structure as we did above, you
-can use the built-in function named C<readline> to reads a record just
+can use the built-in function named C<readline> to read a record just
as C<< <> >> does. Given the initialization shown above for @fd, this
-would work, but only because readline() require a typeglob. It doesn't
+would work, but only because readline() requires a typeglob. It doesn't
work with objects or strings, which might be a bug we haven't fixed yet.
$got = readline($fd[0]);