Re: FW: DBI 1.6.15 problem on AIX 6.1 with perl 5.8.8 64bit

On 08/10/10 15:25, Hatala, Michael wrote:
> I don't have the prove command with this perl 5.8.8 64bit release. I'm
> assuming it's a byproduct of the perl installation(?) 

It is in Test::Harness which you already have but perhaps not new enough.
On my Linux system it is not in the same place as the perl binary - perl binary is in /usr/bin and prove is in /usr/local/bin.

Martin
-- 
Martin J. Evans
Easysoft Limited
http://www.easysoft.com

> -----Original Message-----
> From: Martin J. Evans [mailto:[email protected]] 
> Sent: Friday, October 08, 2010 10:06 AM
> To: Hatala, Michael 
> Cc: Jens Rehsack; [email protected]
> Subject: Re: FW: DBI 1.6.15 problem on AIX 6.1 with perl 5.8.8 64bit
> 
> On 08/10/10 14:06, Hatala, Michael wrote:
>> Jens, thanks for the promt response. It apperas that the command you
> gave me just hangs, never completes without a kill, but here is the
> output.
>>
>> perl -Mblib -d t/51dbm_file.t
>>
>> Loading DB routines from perl5db.pl version 1.28 Editor support 
>> available.
>>
>> Enter h or `h h' for help, or `man perldebug' for more help.
>>
>> main::(t/51dbm_file.t:2):       $| = 1;
>>   DB<1> c
> 
>> ok 1 - drop table
>> ok 2 - FRED.dir exists
>> ok 3 - fred.dir exists
>>
>> Thanks, Mike Hatala
> 
> Have you got the prove command? If so run
> 
> prove -vb t/51dbm_file.t
> 
> it should give better output.
> 
> Martin
> --
> Martin J. Evans
> Easysoft Limited
> http://www.easysoft.com
> 
>> -----Original Message-----
>> From: Jens Rehsack [mailto:[email protected]]
>> Sent: Friday, October 08, 2010 3:36 AM
>> To: Hatala, Michael
>> Cc: [email protected]
>> Subject: Re: FW: DBI 1.6.15 problem on AIX 6.1 with perl 5.8.8 64bit
>>
>> 2010/10/8 Hatala, Michael <[email protected]>:
>>> Well I can't send a zip so here is my error in the tests and the perl
> 
>>> -V. I'm pretty much stuck at this point and need some direction.
>>>
>>> t/zvxgnp_51dbm_file.t ......
>>> ok 1 - drop table
>>> ok 2 - FRED.dir exists
>>> ok 3 - fred.dir exists
>>> Dubious, test returned -1 (wstat 139, 0x8b) All 3 subtests passed
>>>
>>> ...
>>>
>>> Test Summary Report
>>> -------------------
>>> t/50dbm_simple.t         (Wstat: 139 Tests: 12 Failed: 0)
>>>  Non-zero exit status: -1
>>>  Parse errors: No plan found in TAP output t/51dbm_file.t           
>>> (Wstat: 139 Tests: 3 Failed: 0)
>>>  Non-zero exit status: -1
>>>  Parse errors: No plan found in TAP output
>>>
>>> # perl -V
>>> Summary of my perl5 (revision 5 version 8 subversion 8)
> configuration:
>>>  Platform:
>>>    osname=aix, osvers=5.3.0.0, archname=aix-thread-multi-64all
>>>    uname='aix akash79 3 5 00011a85d600 '
>>>    config_args='-desr -Dinstallprefix=/usr/opt/perl5
>>> -Dprefix=/usr/opt/perl5 -Dcc=xlc_r -Duseshrplib -Dusethreads'
>>>    hint=recommended, useposix=true, d_sigaction=define
>>>    usethreads=define use5005threads=undef useithreads=define 
>>> usemultiplicity=define
>>>    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
>>>    use64bitint=define use64bitall=define uselongdouble=undef
>>>    usemymalloc=n, bincompat5005=undef
>>>  Compiler:
>>>    cc='cc_r', ccflags ='-D_ALL_SOURCE -D_ANSI_C_SOURCE 
>>> -D_POSIX_SOURCE
>>> -qmaxmem=-1 -qnoansialias -DUSE_NATIVE_DLOPEN -DNEED_PTHREAD_INIT 
>>> -q64 -DUS E_64_BIT_ALL -q64',
>>>    optimize='-O',
>>>    cppflags='-D_ALL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE
>>> -qmaxmem=-1 -qnoansialias -DUSE_NATIVE_DLOPEN -DNEED_PTHREAD_INIT'
>>>    ccversion='9.0.0.2', gccversion='', gccosandvers=''
>>>    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=87654321
>>>    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=8
>>>    ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t',
>>> lseeksize=8
>>>    alignbytes=8, prototype=define
>>>  Linker and Libraries:
>>>    ld='ld', ldflags ='-brtl -bdynamic -b64'
>>>    libpth=/lib /usr/lib /usr/ccs/lib
>>>    libs=-lbind -lnsl -lgdbm -ldbm -ldb -ldl -lld -lm -lcrypt 
>>> -lpthreads -lc -lbsd
>>>    perllibs=-lbind -lnsl -ldl -lld -lm -lcrypt -lpthreads -lc -lbsd
>>>    libc=, so=a, useshrplib=true, libperl=libperl.a
>>>    gnulibc_version=''
>>>  Dynamic Linking:
>>>    dlsrc=dl_aix.xs, dlext=so, d_dlsymun=undef, ccdlflags='
>>> -bE:/usr/opt/perl5/lib64/5.8.8/aix-thread-multi-64all/CORE/perl.exp'
>>>    cccdlflags=' ', lddlflags='-b64 -bhalt:4 -bexpall -G -bnoentry 
>>> -lpthreads -lc'
>>>
>>>
>>> Characteristics of this binary (from libperl):
>>>  Compile-time options: MULTIPLICITY PERL_IMPLICIT_CONTEXT
>>>                        PERL_MALLOC_WRAP USE_64_BIT_ALL USE_64_BIT_INT
>>>                        USE_ITHREADS USE_LARGE_FILES USE_PERLIO
>>>                        USE_REENTRANT_API  Built under aix  Compiled 
>>> at Jun  3 2009 12:34:41
>>>  @INC:
>>>    /usr/opt/perl5/lib64/5.8.8/aix-thread-multi-64all
>>>    /usr/opt/perl5/lib64/5.8.8
>>>    /usr/opt/perl5/lib64/site_perl/5.8.8/aix-thread-multi-64all
>>>    /usr/opt/perl5/lib64/site_perl/5.8.8
>>>    /usr/opt/perl5/lib64/site_perl
>>>
>>> -----Original Message-----
>>> From: Hatala, Michael
>>> Sent: Thursday, October 07, 2010 6:07 PM
>>> To: '[email protected]'
>>> Subject: DBI 1.6.15 problem on AIX 6.1 with perl 5.8.8 64bit
>>>
>>> I'm getting many
>>>
>>> 'Dubious, test returned -1 (wstat 139, 0x8b)' errors
>>>
>>> when running the 'make test'. I have attached all of the appropriate 
>>> files.
>>>
>>> Any help would be appreciated.
>>
>> Try a perl -Mblib -d t/51dbm_file.t, type 'c' at the debugger prompt
> and see what fails (usually you'll see much more in debugger than in
> normal output).
>>
>> I can't reproduce on an AIX 6.1 32-bit, gcc (except the initial error
> of to low Test::More installed, which causes nearly all tests fail at
> the first "ok()").
>>
>> Jens