Re: Smoke [blead] v5.26.0-859-g7bd9fb107e FAIL(X) os/390 25.00 (2964/)

[email protected] (Karl Williamson) Wed, 4 Oct 2017 08:25:08 -0600
Newsgroups perl.mvs,perl.perl5.porters,perl.daily-build.reports
Message-ID <[email protected]>
On 10/4/2017 7:12 AM, Yaroslav Kuzmin wrote:
> What kind of debugging information should I add?

The script I attached to the previous email is a modification to=20
t/Langinfo.t which has the extra debugging info that I was thinking of,=20
so that should be run instead of t/Langinfo.t
>
>
> (02:45) RS12 : PDKUZM | ~/ussport/perl/perl-build/ext/I18N-Langinfo
> :> ../../perl -Dp -I../../lib -T t/Langinfo.t
> ....
>
> ok 37 - THOUSEP =3D> ''
> Starting parse
> Entering state 0
> lookahead token is token GRAMPROG (0x0)
> Shifting token GRAMPROG, Entering state 1
> Reducing stack by rule 1 (line 118), -> @1
> Entering state 8
> Reducing stack by rule 15 (line 206), -> remember
> Entering state 15
> Reducing stack by rule 18 (line 224), -> stmtseq
> Entering state 103
> Reading a token:
> lookahead token is token UNIOP (0x2a)
> Shifting token UNIOP, Entering state 39
> Reading a token:
> lookahead token is token '&' (0x800)
> Shifting token '&', Entering state 21
> Reading a token:
> lookahead token is token BAREWORD (0x21ad9724)
> Shifting token BAREWORD, Entering state 108
> Reducing stack by rule 268 (line 1328), BAREWORD -> indirob
> Entering state 114
> Reducing stack by rule 255 (line 1282), '&' indirob -> amper
> Entering state 68
> Reading a token:
> lookahead token is token ';' (0x21ad9724)
> Reducing stack by rule 201 (line 1135), amper -> term
> Entering state 128
> lookahead token is token ';' (0x21ad9724)
> Reducing stack by rule 215 (line 1171), UNIOP term -> term
> Entering state 65
> lookahead token is token ';' (0x21ad9724)
> Reducing stack by rule 120 (line 853), term -> listexpr
> Entering state 58
> lookahead token is token ';' (0x21ad9724)
> Reducing stack by rule 117 (line 842), listexpr -> expr
> Entering state 97
> lookahead token is token ';' (0x21ad9724)
> Reducing stack by rule 60 (line 518), expr -> sideff
> Entering state 96
> lookahead token is token ';' (0x21ad9724)
> Shifting token ';', Entering state 213
> Reducing stack by rule 54 (line 480), sideff ';' -> barestmt
> Entering state 101
> Reducing stack by rule 22 (line 245), barestmt -> fullstmt
> Entering state 222
> Reducing stack by rule 19 (line 225), stmtseq fullstmt -> stmtseq
> Entering state 103
> Reading a token:
> Now at end of input.
> lookahead token is token $end (0x21ad9724)
> Reducing stack by rule 2 (line 117), GRAMPROG @1 remember stmtseq -> gr=
ammar
> Entering state 7
> lookahead token is token $end (0x21ad9724)
> clearing the parse stack
> CEE3204S The system detected a protection exception (System Completion =
Code=3D0C4).
>          From compile unit /u/pdkuzm/ussport/perl/perl-build/sv.c at en=
try point Perl_newSVpv at statement 9410 at
>          compile unit offset +00000134 at entry offset +00000134 at add=
ress 214C97FC.
> Segmentation fault
> (02:47) RS12 : PDKUZM | ~/ussport/perl/perl-build/ext/I18N-Langinfo
> :>
>
> -------- =D0=98=D1=81=D1=85=D0=BE=D0=B4=D0=BD=D0=BE=D0=B5 =D1=81=D0=BE=D0=
=BE=D0=B1=D1=89=D0=B5=D0=BD=D0=B8=D0=B5 --------
> =D0=9E=D1=82: Karl Williamson <[email protected]>
> =D0=9A=D0=BE=D0=BC=D1=83: Yaroslav Kuzmin <[email protected]>,=
 [email protected] <[email protected]>, [email protected] <perl5-por=
[email protected]>
> =D0=9A=D0=BE=D0=BF=D0=B8=D1=8F: [email protected] <daily-bui=
[email protected]>
> =D0=A2=D0=B5=D0=BC=D0=B0: Re: Smoke [blead] v5.26.0-859-g7bd9fb107e FAI=
L(X) os/390 25.00 (2964/)
> =D0=94=D0=B0=D1=82=D0=B0: Tue, 3 Oct 2017 22:54:13 -0600
>
> On 10/03/2017 05:44 AM, Yaroslav Kuzmin wrote:
>>
>> Dump attachment
> Thanks.  Please try the attached Langinfo.t, which has extra debugging
> info to see what happens.
>
>
>>
>>
>> (07:44) RS12 : PDKUZM | ~/ussport/perl/perl-build/ext/I18N-Langinfo
>> :> ../../perl -I../../lib -T t/Langinfo.t
>> 1..38
>> ok 1 - use I18N::Langinfo;
>> ok 2 - calling langinfo() with ABDAY_1
>> ok 3 - checking if the returned string is defined
>> ok 4 - checking if the returned string has a positive length
>> ok 5 - calling langinfo() with DAY_1
>> ok 6 - checking if the returned string is defined
>> ok 7 - checking if the returned string has a positive length
>> ok 8 - calling langinfo() with ABMON_1
>> ok 9 - checking if the returned string is defined
>> ok 10 - checking if the returned string has a positive length
>> ok 11 - calling langinfo() with MON_1
>> ok 12 - checking if the returned string is defined
>> ok 13 - checking if the returned string has a positive length
>> ok 14 - calling langinfo() with RADIXCHAR
>> ok 15 - checking if the returned string is defined
>> ok 16 - checking if the returned string has a positive length
>> ok 17 - calling langinfo() with AM_STR
>> ok 18 - checking if the returned string is defined
>> ok 19 - checking if the returned string has a positive length
>> ok 20 - calling langinfo() with THOUSEP
>> ok 21 # skip returned string was empty, skipping next two tests
>> ok 22 # skip returned string was empty, skipping next two tests
>> ok 23 - calling langinfo() with D_T_FMT
>> ok 24 - checking if the returned string is defined
>> ok 25 - checking if the returned string has a positive length
>> ok 26 - calling langinfo() with D_FMT
>> ok 27 - checking if the returned string is defined
>> ok 28 - checking if the returned string has a positive length
>> ok 29 - calling langinfo() with T_FMT
>> ok 30 - checking if the returned string is defined
>> ok 31 - checking if the returned string has a positive length
>> ok 32 - ABDAY_1 =3D> 'Sun'
>> ok 33 - ABMON_1 =3D> 'Jan'
>> ok 34 - DAY_1 =3D> 'Sunday'
>> ok 35 - MON_1 =3D> 'January'
>> ok 36 - RADIXCHAR =3D> '.'
>> ok 37 - THOUSEP =3D> ''
>> CEE3204S The system detected a protection exception (System Completion
>> Code=3D0C4).
>>           From compile unit /u/pdkuzm/ussport/perl/perl-build/sv.c at
>> entry point Perl_newSVpv at statement 9410 at
>>           compile unit offset +00000134 at entry offset +00000134 at
>> address 214C97FC.
>> Segmentation fault
>>
>>
>>
>> -------- =D0=98=D1=81=D1=85=D0=BE=D0=B4=D0=BD=D0=BE=D0=B5 =D1=81=D0=BE=
=D0=BE=D0=B1=D1=89=D0=B5=D0=BD=D0=B8=D0=B5 --------
>> *=D0=9E=D1=82*: Karl Williamson <[email protected]
>> <mailto:Karl%20Williamson%20%[email protected]%3e>>
>> *=D0=9A=D0=BE=D0=BC=D1=83*: Yaroslav Kuzmin <[email protected]=
m
>> <mailto:Yaroslav%20Kuzmin%20%[email protected]%3e>>,
>> [email protected] <[email protected]
>> <mailto:%[email protected]%22%20%[email protected]%3e>>,
>> [email protected] <[email protected]
>> <mailto:%[email protected]%22%20%[email protected]%3e>>
>> *=D0=9A=D0=BE=D0=BF=D0=B8=D1=8F*: [email protected] <daily-=
[email protected]
>> <mailto:%[email protected]%22%20%3cdaily-build-reports@pe=
rl.org%3e>>
>> *=D0=A2=D0=B5=D0=BC=D0=B0*: Re: Smoke [blead] v5.26.0-859-g7bd9fb107e =
FAIL(X) os/390 25.00
>> (2964/)
>> *=D0=94=D0=B0=D1=82=D0=B0*: Tue, 19 Sep 2017 09:24:46 -0600
>>
>> On 09/12/2017 02:47 AM, Yaroslav Kuzmin wrote:
>>>
>>> Smoke log available at
>>> https://drive.google.com/file/d/0B5PTttxwo7qARVAzdGo5SDFFRWs Automate=
d
>>> smoke report for branch blead 5.27.4 patch
>>> 7bd9fb107eaf8df3da9ce46c89920f8da72c76ab v5.26.0-859-g7bd9fb107e
>>
>> The new failure in this report is
>>
>> CEE3204S The system detected a protection exception (System Completion
>> Code=3D0C4).
>>            From entry point Perl_newSVpv at compile unit offset +00000=
0B8
>> at entry offset +000000B8 at address 2124CF20.
>> ext/I18N-Langinfo/t/Langinfo ..................................
>> FAILED--expected 38 tests, saw 37
>>
>>
>>   From looking at the internet on this, this looks like what's called =
a
>> segfault in Unix.  I looked at the code and I don't see anything wrong=
.
>>
>> Any ideas?
>>
>> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D
>> Rocket Software, Inc. and subsidiaries =E2=96=A0 77 Fourth Avenue, Wal=
tham MA
>> 02451 =E2=96=A0 Main Office Toll Free Number: +1 877.328.2932
>> Contact Customer Support:
>> https://my.rocketsoftware.com/RocketCommunity/RCEmailSupport
>> Unsubscribe from Marketing Messages/Manage Your Subscription Preferenc=
es
>> - http://www.rocketsoftware.com/manage-your-email-preferences
>> Privacy Policy - http://www.rocketsoftware.com/company/legal/privacy-p=
olicy
>> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D
>>
>> This communication and any attachments may contain confidential
>> information of Rocket Software, Inc. All unauthorized use, disclosure =
or
>> distribution is prohibited. If you are not the intended recipient,
>> please notify Rocket Software immediately and destroy all copies of th=
is
>> communication. Thank you.
>>
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D
> Rocket Software, Inc. and subsidiaries =E2=96=A0 77 Fourth Avenue, Walt=
ham MA 02451 =E2=96=A0 Main Office Toll Free Number: +1 877.328.2932
> Contact Customer Support: https://my.rocketsoftware.com/RocketCommunity=
/RCEmailSupport
> Unsubscribe from Marketing Messages/Manage Your Subscription Preference=
s - http://www.rocketsoftware.com/manage-your-email-preferences
> Privacy Policy - http://www.rocketsoftware.com/company/legal/privacy-po=
licy
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D
>
> This communication and any attachments may contain confidential informa=
tion of Rocket Software, Inc. All unauthorized use, disclosure or distrib=
ution is prohibited. If you are not the intended recipient, please notify=
 Rocket Software immediately and destroy all copies of this communication=
. Thank you.
>