build test problem
[email protected] (Michal)
| Newsgroups | perl.sdl.devel |
|---|---|
| Message-ID | <[email protected]> |
Hello,
I have installed all the SDL packets on my Fedora 8 but I couldn`t
manage to install SDL_perl using the CPAN...
I tried to install SDL_perl directly from Your site. This is the result:
[23:58:12 ]#./Build test
t/apppm............1/2
# Failed test 'use SDL::App;'
# at t/apppm.t line 19.
# Tried to use 'SDL::App'.
# Error: Can't locate loadable object for module SDL_perl in @INC
(@INC contains: blib/lib blib/arch
/home/Mich/Pulpit/sdl/SDL_Perl-2.1.3/blib/lib
/home/Mich/Pulpit/sdl/SDL_Perl-2.1.3/blib/arch make/lib
/usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7
/usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5
/usr/lib/perl5/site_perl
/usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7
/usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5
/usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/5.8.8 .) at blib/lib/SDL.pm line 13
# Compilation failed in require at blib/lib/SDL.pm line 13.
# BEGIN failed--compilation aborted at blib/lib/SDL.pm line 13.
# Compilation failed in require at blib/lib/SDL/App.pm line 10.
# BEGIN failed--compilation aborted at blib/lib/SDL/App.pm line 10.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
# Failed test 'SDL::App->can(...)'
# at t/apppm.t line 21.
# SDL::App->can('new') failed
# SDL::App->can('resize') failed
# SDL::App->can('title') failed
# SDL::App->can('delay') failed
# SDL::App->can('ticks') failed
# SDL::App->can('error') failed
# SDL::App->can('warp') failed
# SDL::App->can('fullscreen') failed
# SDL::App->can('iconify') failed
# SDL::App->can('grab_input') failed
# SDL::App->can('loop') failed
# SDL::App->can('sync') failed
# SDL::App->can('attribute') failed
# Looks like you failed 2 tests of 2.
t/apppm............ Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/2 subtests
t/cdrompm..........ok
t/colorpm..........1/10
# Failed test 'use SDL::Color;'
# at t/colorpm.t line 18.
# Tried to use 'SDL::Color'.
# Error: Can't locate loadable object for module SDL_perl in @INC
(@INC contains: blib/lib blib/arch
/home/Mich/Pulpit/sdl/SDL_Perl-2.1.3/blib/lib
/home/Mich/Pulpit/sdl/SDL_Perl-2.1.3/blib/arch make/lib
/usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7
/usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5
/usr/lib/perl5/site_perl
/usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7
/usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5
/usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/5.8.8 .) at blib/lib/SDL.pm line 13
# Compilation failed in require at blib/lib/SDL.pm line 13.
# BEGIN failed--compilation aborted at blib/lib/SDL.pm line 13.
# Compilation failed in require at blib/lib/SDL/Color.pm line 10.
# BEGIN failed--compilation aborted at blib/lib/SDL/Color.pm line 10.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
# Failed test 'SDL::Color->can(...)'
# at t/colorpm.t line 20.
# SDL::Color->can('new') failed
# SDL::Color->can('r') failed
# SDL::Color->can('g') failed
# SDL::Color->can('b') failed
# SDL::Color->can('pixel') failed
Can't locate object method "new" via package "SDL::Color" at t/colorpm.t
line 29.
# Looks like you planned 10 tests but ran 2.
# Looks like you failed 2 tests of 2 run.
# Looks like your test exited with 255 just after 2.
t/colorpm.......... Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 10/10 subtests
t/cursorpm.........ok
t/eventpm..........1/2
# Failed test 'use SDL::Event;'
# at t/eventpm.t line 18.
# Tried to use 'SDL::Event'.
# Error: Can't locate loadable object for module SDL_perl in @INC
(@INC contains: blib/lib blib/arch
/home/Mich/Pulpit/sdl/SDL_Perl-2.1.3/blib/lib
/home/Mich/Pulpit/sdl/SDL_Perl-2.1.3/blib/arch make/lib
/usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7
/usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5
/usr/lib/perl5/site_perl
/usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7
/usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5
/usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/5.8.8 .) at blib/lib/SDL.pm line 13
# Compilation failed in require at blib/lib/SDL.pm line 13.
# BEGIN failed--compilation aborted at blib/lib/SDL.pm line 13.
# Compilation failed in require at blib/lib/SDL/Event.pm line 12.
# BEGIN failed--compilation aborted at blib/lib/SDL/Event.pm line 12.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
# Failed test 'SDL::Event->can(...)'
# at t/eventpm.t line 20.
# SDL::Event->can('new') failed
# SDL::Event->can('type') failed
# SDL::Event->can('pump') failed
# SDL::Event->can('poll') failed
# SDL::Event->can('wait') failed
# SDL::Event->can('set') failed
# SDL::Event->can('set_unicode') failed
# SDL::Event->can('set_key_repeat') failed
# SDL::Event->can('active_gain') failed
# SDL::Event->can('active_state') failed
# SDL::Event->can('key_state') failed
# SDL::Event->can('key_sym') failed
# SDL::Event->can('key_name') failed
# SDL::Event->can('key_mod') failed
# SDL::Event->can('key_unicode') failed
# SDL::Event->can('key_scancode') failed
# SDL::Event->can('motion_state') failed
# SDL::Event->can('motion_x') failed
# SDL::Event->can('motion_y') failed
# SDL::Event->can('motion_xrel') failed
# SDL::Event->can('motion_yrel') failed
# SDL::Event->can('button') failed
# SDL::Event->can('button_state') failed
# SDL::Event->can('button_x') failed
# SDL::Event->can('button_y') failed
# Looks like you failed 2 tests of 2.
t/eventpm.......... Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/2 subtests
t/fontpm...........1/2
# Failed test 'use SDL::Font;'
# at t/fontpm.t line 23.
# Tried to use 'SDL::Font'.
# Error: Can't locate loadable object for module SDL_perl in @INC
(@INC contains: blib/lib blib/arch
/home/Mich/Pulpit/sdl/SDL_Perl-2.1.3/blib/lib
/home/Mich/Pulpit/sdl/SDL_Perl-2.1.3/blib/arch make/lib
/usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7
/usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5
/usr/lib/perl5/site_perl
/usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7
/usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5
/usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/5.8.8 .) at blib/lib/SDL.pm line 13
# Compilation failed in require at blib/lib/SDL.pm line 13.
# BEGIN failed--compilation aborted at blib/lib/SDL.pm line 13.
# Compilation failed in require at blib/lib/SDL/Font.pm line 10.
# BEGIN failed--compilation aborted at blib/lib/SDL/Font.pm line 10.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
# Failed test 'SDL::Font->can(...)'
# at t/fontpm.t line 25.
# SDL::Font->can('new') failed
# SDL::Font->can('use') failed
# Looks like you failed 2 tests of 2.
t/fontpm........... Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/2 subtests
t/mixerpm..........Can't locate loadable object for module SDL_perl in
@INC (@INC contains: blib/lib blib/arch
/home/Mich/Pulpit/sdl/SDL_Perl-2.1.3/blib/lib
/home/Mich/Pulpit/sdl/SDL_Perl-2.1.3/blib/arch make/lib
/usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7
/usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5
/usr/lib/perl5/site_perl
/usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7
/usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5
/usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/5.8.8 .) at blib/lib/SDL.pm line 13
Compilation failed in require at blib/lib/SDL.pm line 13.
BEGIN failed--compilation aborted at blib/lib/SDL.pm line 13.
Compilation failed in require at t/mixerpm.t line 13.
BEGIN failed--compilation aborted at t/mixerpm.t line 13.
t/mixerpm.......... Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
t/mpegpm...........skipped: smpeg support not compiled
t/musicpm..........1/2
# Failed test 'use SDL::Music;'
# at t/musicpm.t line 19.
# Tried to use 'SDL::Music'.
# Error: Can't locate loadable object for module SDL_perl in @INC
(@INC contains: blib/lib blib/arch
/home/Mich/Pulpit/sdl/SDL_Perl-2.1.3/blib/lib
/home/Mich/Pulpit/sdl/SDL_Perl-2.1.3/blib/arch make/lib
/usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7
/usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5
/usr/lib/perl5/site_perl
/usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7
/usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5
/usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/5.8.8 .) at blib/lib/SDL.pm line 13
# Compilation failed in require at blib/lib/SDL.pm line 13.
# BEGIN failed--compilation aborted at blib/lib/SDL.pm line 13.
# Compilation failed in require at blib/lib/SDL/Music.pm line 9.
# BEGIN failed--compilation aborted at blib/lib/SDL/Music.pm line 9.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
# Failed test 'SDL::Music->can('new')'
# at t/musicpm.t line 21.
# SDL::Music->can('new') failed
# Looks like you failed 2 tests of 2.
t/musicpm.......... Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/2 subtests
t/opengl...........1/3
# Failed test 'use SDL::OpenGL;'
# at t/opengl.t line 23.
# Tried to use 'SDL::OpenGL'.
# Error: Can't locate loadable object for module SDL_perl in @INC
(@INC contains: blib/lib blib/arch
/home/Mich/Pulpit/sdl/SDL_Perl-2.1.3/blib/lib
/home/Mich/Pulpit/sdl/SDL_Perl-2.1.3/blib/arch make/lib
/usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7
/usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5
/usr/lib/perl5/site_perl
/usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7
/usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5
/usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/5.8.8 .) at blib/lib/SDL.pm line 13
# Compilation failed in require at blib/lib/SDL.pm line 13.
# BEGIN failed--compilation aborted at blib/lib/SDL.pm line 13.
# Compilation failed in require at blib/lib/SDL/OpenGL.pm line 18.
# BEGIN failed--compilation aborted at blib/lib/SDL/OpenGL.pm line 18.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
# Failed test 'main->can(...)'
# at t/opengl.t line 25.
# main->can('glBegin') failed
# main->can('glClear') failed
# main->can('glClearColor') failed
# main->can('glColor') failed
# main->can('glCullFace') failed
# main->can('glEnable') failed
# main->can('glEnd') failed
# main->can('glEvalCoord1') failed
# main->can('glEvalCoord2') failed
# main->can('glEvalMesh2') failed
# main->can('glFrontFace') failed
# main->can('glFrustum') failed
# main->can('glGet') failed
# main->can('glLight') failed
# main->can('glLoadIdentity') failed
# main->can('glMap1') failed
# main->can('glMap2') failed
# main->can('glMapGrid2') failed
# main->can('glMaterial') failed
# main->can('glMatrixMode') failed
# main->can('glPointSize') failed
# main->can('glPopMatrix') failed
# main->can('glPushMatrix') failed
# main->can('glRotate') failed
# main->can('glScale') failed
# main->can('glShadeModel') failed
# main->can('glTranslate') failed
# main->can('glVertex') failed
# main->can('glVertex') failed
# main->can('glViewport') failed
# Failed test 'main->can(...)'
# at t/opengl.t line 57.
# main->can('gluPerspective') failed
# main->can('gluBeginSurface') failed
# main->can('gluBeginTrim') failed
# main->can('gluEndSurface') failed
# main->can('gluEndTrim') failed
# main->can('gluNewNurbsRenderer') failed
# main->can('gluNurbsCurve') failed
# main->can('gluNurbsProperty') failed
# main->can('gluNurbsSurface') failed
# main->can('gluPwlCurve') failed
# Looks like you failed 3 tests of 3.
t/opengl........... Dubious, test returned 3 (wstat 768, 0x300)
Failed 3/3 subtests
t/palettepm........ok
t/rectpm...........1/15
# Failed test 'use SDL::Rect;'
# at t/rectpm.t line 18.
# Tried to use 'SDL::Rect'.
# Error: Can't locate loadable object for module SDL_perl in @INC
(@INC contains: blib/lib blib/arch
/home/Mich/Pulpit/sdl/SDL_Perl-2.1.3/blib/lib
/home/Mich/Pulpit/sdl/SDL_Perl-2.1.3/blib/arch make/lib
/usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7
/usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5
/usr/lib/perl5/site_perl
/usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7
/usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5
/usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/5.8.8 .) at blib/lib/SDL.pm line 13
# Compilation failed in require at blib/lib/SDL.pm line 13.
# BEGIN failed--compilation aborted at blib/lib/SDL.pm line 13.
# Compilation failed in require at blib/lib/SDL/Rect.pm line 10.
# BEGIN failed--compilation aborted at blib/lib/SDL/Rect.pm line 10.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
# Failed test 'SDL::Rect->can(...)'
# at t/rectpm.t line 20.
# SDL::Rect->can('new') failed
# SDL::Rect->can('x') failed
# SDL::Rect->can('y') failed
# SDL::Rect->can('width') failed
# SDL::Rect->can('height') failed
Can't locate object method "new" via package "SDL::Rect" at t/rectpm.t
line 27.
# Looks like you planned 15 tests but ran 2.
# Looks like you failed 2 tests of 2 run.
# Looks like your test exited with 255 just after 2.
t/rectpm........... Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 15/15 subtests
t/sdlpm............1/9
# Failed test 'use SDL;'
# at t/sdlpm.t line 19.
# Tried to use 'SDL'.
# Error: Can't locate loadable object for module SDL_perl in @INC
(@INC contains: blib/lib blib/arch
/home/Mich/Pulpit/sdl/SDL_Perl-2.1.3/blib/lib
/home/Mich/Pulpit/sdl/SDL_Perl-2.1.3/blib/arch make/lib
/usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7
/usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5
/usr/lib/perl5/site_perl
/usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7
/usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5
/usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/5.8.8 .) at blib/lib/SDL.pm line 13
# Compilation failed in require at blib/lib/SDL.pm line 13.
# BEGIN failed--compilation aborted at blib/lib/SDL.pm line 13.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
# Failed test 'SDL->can(...)'
# at t/sdlpm.t line 21.
# SDL->can('in') failed
# SDL->can('verify') failed
Undefined subroutine &SDL::in called at t/sdlpm.t line 23.
# Looks like you planned 9 tests but ran 2.
# Looks like you failed 2 tests of 2 run.
# Looks like your test exited with 255 just after 2.
t/sdlpm............ Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 9/9 subtests
t/soundpm..........ok
t/surfacepm........1/3
# Failed test 'use SDL::Surface;'
# at t/surfacepm.t line 18.
# Tried to use 'SDL::Surface'.
# Error: Can't locate loadable object for module SDL_perl in @INC
(@INC contains: blib/lib blib/arch
/home/Mich/Pulpit/sdl/SDL_Perl-2.1.3/blib/lib
/home/Mich/Pulpit/sdl/SDL_Perl-2.1.3/blib/arch make/lib
/usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7
/usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5
/usr/lib/perl5/site_perl
/usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7
/usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5
/usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/5.8.8 .) at blib/lib/SDL.pm line 13
# Compilation failed in require at blib/lib/SDL.pm line 13.
# BEGIN failed--compilation aborted at blib/lib/SDL.pm line 13.
# Compilation failed in require at blib/lib/SDL/Surface.pm line 11.
# BEGIN failed--compilation aborted at blib/lib/SDL/Surface.pm line 11.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
# Failed test 'SDL::Surface->can(...)'
# at t/surfacepm.t line 20.
# SDL::Surface->can('new') failed
# SDL::Surface->can('flags') failed
# SDL::Surface->can('palette') failed
# SDL::Surface->can('bpp') failed
# SDL::Surface->can('bytes_per_pixel') failed
# SDL::Surface->can('Rshift') failed
# SDL::Surface->can('Gshift') failed
# SDL::Surface->can('Bshift') failed
# SDL::Surface->can('Ashift') failed
# SDL::Surface->can('Rmask') failed
# SDL::Surface->can('Bmask') failed
# SDL::Surface->can('Gmask') failed
# SDL::Surface->can('Amask') failed
# SDL::Surface->can('color_key') failed
# SDL::Surface->can('alpha') failed
# SDL::Surface->can('width') failed
# SDL::Surface->can('height') failed
# SDL::Surface->can('pitch') failed
# SDL::Surface->can('pixels') failed
# SDL::Surface->can('pixel') failed
# SDL::Surface->can('fill') failed
# SDL::Surface->can('lockp') failed
# SDL::Surface->can('lock') failed
# SDL::Surface->can('unlock') failed
# SDL::Surface->can('update') failed
# SDL::Surface->can('flip') failed
# SDL::Surface->can('blit') failed
# SDL::Surface->can('set_colors') failed
# SDL::Surface->can('set_color_key') failed
# SDL::Surface->can('set_alpha') failed
# SDL::Surface->can('display_format') failed
# SDL::Surface->can('rgb') failed
# SDL::Surface->can('rgba') failed
# SDL::Surface->can('print') failed
# SDL::Surface->can('save_bmp') failed
# SDL::Surface->can('video_info') failed
Can't locate object method "new" via package "SDL::Surface" at
t/surfacepm.t line 58.
# Looks like you planned 3 tests but ran 2.
# Looks like you failed 2 tests of 2 run.
# Looks like your test exited with 255 just after 2.
t/surfacepm........ Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 3/3 subtests
t/timerpm..........Can't locate loadable object for module SDL_perl in
@INC (@INC contains: blib/lib blib/arch
/home/Mich/Pulpit/sdl/SDL_Perl-2.1.3/blib/lib
/home/Mich/Pulpit/sdl/SDL_Perl-2.1.3/blib/arch make/lib
/usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7
/usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5
/usr/lib/perl5/site_perl
/usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7
/usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5
/usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/5.8.8 .) at blib/lib/SDL.pm line 13
Compilation failed in require at blib/lib/SDL.pm line 13.
BEGIN failed--compilation aborted at blib/lib/SDL.pm line 13.
Compilation failed in require at t/timerpm.t line 13.
BEGIN failed--compilation aborted at t/timerpm.t line 13.
t/timerpm.......... Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
t/toolfontpm.......1/2
# Failed test 'use SDL::Tool::Font;'
# at t/toolfontpm.t line 30.
# Tried to use 'SDL::Tool::Font'.
# Error: Can't locate loadable object for module SDL_perl in @INC
(@INC contains: blib/lib blib/arch
/home/Mich/Pulpit/sdl/SDL_Perl-2.1.3/blib/lib
/home/Mich/Pulpit/sdl/SDL_Perl-2.1.3/blib/arch make/lib
/usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7
/usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5
/usr/lib/perl5/site_perl
/usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7
/usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5
/usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/5.8.8 .) at blib/lib/SDL.pm line 13
# Compilation failed in require at blib/lib/SDL.pm line 13.
# BEGIN failed--compilation aborted at blib/lib/SDL.pm line 13.
# Compilation failed in require at blib/lib/SDL/Tool/Font.pm line 8.
# BEGIN failed--compilation aborted at blib/lib/SDL/Tool/Font.pm line 8.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
# Failed test 'SDL::Tool::Font->can(...)'
# at t/toolfontpm.t line 32.
# SDL::Tool::Font->can('new') failed
# SDL::Tool::Font->can('print') failed
# Looks like you failed 2 tests of 2.
t/toolfontpm....... Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/2 subtests
t/toolgraphicpm....1/3
# Failed test 'use SDL::Tool::Graphic;'
# at t/toolgraphicpm.t line 23.
# Tried to use 'SDL::Tool::Graphic'.
# Error: Can't locate loadable object for module SDL_perl in @INC
(@INC contains: blib/lib blib/arch
/home/Mich/Pulpit/sdl/SDL_Perl-2.1.3/blib/lib
/home/Mich/Pulpit/sdl/SDL_Perl-2.1.3/blib/arch make/lib
/usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7
/usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5
/usr/lib/perl5/site_perl
/usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7
/usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5
/usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/5.8.8 .) at blib/lib/SDL.pm line 13
# Compilation failed in require at blib/lib/SDL.pm line 13.
# BEGIN failed--compilation aborted at blib/lib/SDL.pm line 13.
# Compilation failed in require at blib/lib/SDL/Tool/Graphic.pm line 9.
# BEGIN failed--compilation aborted at blib/lib/SDL/Tool/Graphic.pm line 9.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
# Failed test 'SDL::Tool::Graphic->can(...)'
# at t/toolgraphicpm.t line 25.
# SDL::Tool::Graphic->can('new') failed
# SDL::Tool::Graphic->can('zoom') failed
# SDL::Tool::Graphic->can('rotoZoom') failed
Can't locate object method "new" via package "SDL::Tool::Graphic" at
t/toolgraphicpm.t line 29.
# Looks like you planned 3 tests but ran 2.
# Looks like you failed 2 tests of 2 run.
# Looks like your test exited with 255 just after 2.
t/toolgraphicpm.... Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 3/3 subtests
t/ttfontpm.........1/2
# Failed test 'use SDL::TTFont;'
# at t/ttfontpm.t line 23.
# Tried to use 'SDL::TTFont'.
# Error: Can't locate loadable object for module SDL_perl in @INC
(@INC contains: blib/lib blib/arch
/home/Mich/Pulpit/sdl/SDL_Perl-2.1.3/blib/lib
/home/Mich/Pulpit/sdl/SDL_Perl-2.1.3/blib/arch make/lib
/usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7
/usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5
/usr/lib/perl5/site_perl
/usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7
/usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5
/usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/5.8.8 .) at blib/lib/SDL.pm line 13
# Compilation failed in require at blib/lib/SDL.pm line 13.
# BEGIN failed--compilation aborted at blib/lib/SDL.pm line 13.
# Compilation failed in require at blib/lib/SDL/TTFont.pm line 11.
# BEGIN failed--compilation aborted at blib/lib/SDL/TTFont.pm line 11.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
# Failed test 'SDL::TTFont->can(...)'
# at t/ttfontpm.t line 25.
# SDL::TTFont->can('new') failed
# SDL::TTFont->can('print') failed
# SDL::TTFont->can('width') failed
# SDL::TTFont->can('height') failed
# SDL::TTFont->can('ascent') failed
# SDL::TTFont->can('descent') failed
# SDL::TTFont->can('normal') failed
# SDL::TTFont->can('bold') failed
# SDL::TTFont->can('italic') failed
# SDL::TTFont->can('underline') failed
# SDL::TTFont->can('text_shaded') failed
# SDL::TTFont->can('text_solid') failed
# SDL::TTFont->can('text_blended') failed
# SDL::TTFont->can('utf8_shaded') failed
# SDL::TTFont->can('utf8_solid') failed
# SDL::TTFont->can('utf8_blended') failed
# SDL::TTFont->can('unicode_shaded') failed
# SDL::TTFont->can('unicode_solid') failed
# SDL::TTFont->can('unicode_blended') failed
# Looks like you failed 2 tests of 2.
t/ttfontpm......... Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/2 subtests
t/videopm..........skipped: smpeg support not compiled
Test Summary Report
-------------------
t/apppm (Wstat: 512 Tests: 2 Failed: 2)
Failed tests: 1-2
Non-zero exit status: 2
t/colorpm (Wstat: 65280 Tests: 2 Failed: 2)
Failed tests: 1-2
Non-zero exit status: 255
Parse errors: Bad plan. You planned 10 tests but ran 2.
t/eventpm (Wstat: 512 Tests: 2 Failed: 2)
Failed tests: 1-2
Non-zero exit status: 2
t/fontpm (Wstat: 512 Tests: 2 Failed: 2)
Failed tests: 1-2
Non-zero exit status: 2
t/mixerpm (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/musicpm (Wstat: 512 Tests: 2 Failed: 2)
Failed tests: 1-2
Non-zero exit status: 2
t/opengl (Wstat: 768 Tests: 3 Failed: 3)
Failed tests: 1-3
Non-zero exit status: 3
t/rectpm (Wstat: 65280 Tests: 2 Failed: 2)
Failed tests: 1-2
Non-zero exit status: 255
Parse errors: Bad plan. You planned 15 tests but ran 2.
t/sdlpm (Wstat: 65280 Tests: 2 Failed: 2)
Failed tests: 1-2
Non-zero exit status: 255
Parse errors: Bad plan. You planned 9 tests but ran 2.
t/surfacepm (Wstat: 65280 Tests: 2 Failed: 2)
Failed tests: 1-2
Non-zero exit status: 255
Parse errors: Bad plan. You planned 3 tests but ran 2.
t/timerpm (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/toolfontpm (Wstat: 512 Tests: 2 Failed: 2)
Failed tests: 1-2
Non-zero exit status: 2
t/toolgraphicpm (Wstat: 65280 Tests: 2 Failed: 2)
Failed tests: 1-2
Non-zero exit status: 255
Parse errors: Bad plan. You planned 3 tests but ran 2.
t/ttfontpm (Wstat: 512 Tests: 2 Failed: 2)
Failed tests: 1-2
Non-zero exit status: 2
Files=20, Tests=34, 1 wallclock secs ( 0.11 usr 0.04 sys + 0.75 cusr
0.15 csys = 1.05 CPU)
Result: FAIL
Failed 14/20 test programs. 25/34 subtests failed.