unable to rip audio tracks...no clue...
"Sims, Ted" <[email protected]>
| Newsgroups | gmane.comp.audio.cd-paranoia.general |
|---|---|
| Message-ID | <[email protected]> |
I'm having some trouble ripping audio, and I haven't got a clue where to start looking. I've been using linux and cdparanoia for a while, on two other computers, but I can't seem to get it working on my "new" computer. My new computer is a MSI k7t266 pro ru with a 1.4GHz athlon and 512MB DDR. I have a Lite-on cd/rw as master drive on the second ide channel. I'm using scsi emulation so I access the drive as /dev/sg0. I've attached the errors I'm getting to the end of this email. Note I can ue the drives for other purposes, such as mounting a CDROM, or playing audio through the analog output. Here's a transcript of my problem... bash-2.05a$ cdparanoia -B -v -g /dev/sg0 cdparanoia III release 9.8 (March 23, 2001) (C) 2001 Monty <[email protected]> and Xiphophorus Report bugs to [email protected] http://www.xiph.org/paranoia/ Testing /dev/sg0 for SCSI interface generic device: /dev/sg0 ioctl device: /dev/scd0 Found an accessible SCSI CDROM drive. Looking at revision of the SG interface in use... SG interface version 3.1.24; OK. CDROM model sensed sensed: LITE-ON LTR-12101B LS3B Checking for SCSI emulation... Drive is ATAPI (using SCSI host adaptor emulation) Checking for MMC style command set... Drive is MMC style DMA scatter/gather table entries: 256 table entry size: 32768 bytes maximum theoretical transfer: 3566 sectors Setting default read size to 13 sectors (30576 bytes). Verifying CDDA command set... Expected command set reads OK. Table of contents (audio tracks only): track length begin copy pre ch =========================================================== 1. 33925 [07:32.25] 0 [00:00.00] no no 2 2. 55327 [12:17.52] 33925 [07:32.25] no no 2 3. 36828 [08:11.03] 89252 [19:50.02] no no 2 4. 25495 [05:39.70] 126080 [28:01.05] no no 2 5. 22692 [05:02.42] 151575 [33:41.00] no no 2 6. 30928 [06:52.28] 174267 [38:43.42] no no 2 7. 25435 [05:39.10] 205195 [45:35.70] no no 2 8. 29702 [06:36.02] 230630 [51:15.05] no no 2 9. 19378 [04:18.28] 260332 [57:51.07] no no 2 10. 47295 [10:30.45] 279710 [62:09.35] no no 2 TOTAL 327005 [72:40.05] (audio only) Ripping from sector 0 (track 1 [0:00.00]) to sector 327004 (track 10 [10:30.44]) outputting to track01.cdda.wav SCSI transport error: timeout waiting to read packet scsi_read error: sector=0 length=7 retry=0 Sense key: 0 ASC: 0 ASCQ: 0 Transport error: Error reading command from device System error: Success SCSI transport error: timeout waiting to write packet scsi_read error: sector=0 length=3 retry=1 Sense key: 0 ASC: 0 ASCQ: 0 Transport error: Error writing packet command to device System error: Invalid argument (== PROGRESS == [> | ...... 00 ] == :-0 . ==) SCSI transport error: timeout waiting to read packet scsi_read error: sector=7 length=13 retry=0 Sense key: 0 ASC: 0 ASCQ: 0 Transport error: Error reading command from device System error: Success SCSI transport error: timeout waiting to write packet scsi_read error: sector=7 length=6 retry=1 Sense key: 0 ASC: 0 ASCQ: 0 Transport error: Error writing packet command to device System error: Invalid argument SCSI transport error: timeout waiting to read packet scsi_read error: sector=7 length=3 retry=2 Sense key: 0 ASC: 0 ASCQ: 0 Transport error: Error reading command from device System error: Success SCSI transport error: timeout waiting to write packet scsi_read error: sector=7 length=1 retry=3 Sense key: 0 ASC: 0 ASCQ: 0 Transport error: Error writing packet command to device System error: Invalid argument (== PROGRESS == [> | ...... 00 ] == :-0 o ==) SCSI transport error: timeout waiting to read packet scsi_read error: sector=20 length=13 retry=0 Sense key: 0 ASC: 0 ASCQ: 0 Transport error: Error reading command from device System error: Success --- >8 ---- List archives: http://www.xiph.org/archives/ Paranoia homepage: http://www.xiph.org/paranoia/ To unsubscribe from this list, send a message to '[email protected]' containing only the word 'unsubscribe' in the body. No subject is needed. Unsubscribe messages sent to the list will be ignored/filtered.