Benq CDRW problem
Laurence Baldwin <[email protected]>
| Newsgroups | gmane.comp.audio.cd-paranoia.general |
|---|---|
| Message-ID | <[email protected]> |
Hi, Im having problems ripping CDs with my new Benq CDRW 40x12x48. Ive setup ide-scsi and can mount cds using /dev/sr0 no problems. I can play audio CDs fine. So I assume me setup is OK. When I run cdparanoia -vs -B -- "-3" this is the output: root@beta:/# cdparanoia -vs -B -- "-3" cdparanoia III release 9.8 (March 23, 2001) (C) 2001 Monty <[email protected]> and Xiphophorus Report bugs to [email protected] http://www.xiph.org/paranoia/ Checking /dev/cdrom for cdrom... Testing /dev/cdrom for cooked ioctl() interface /dev/scd0 is not a cooked ioctl CDROM. Testing /dev/cdrom for SCSI interface generic device: /dev/sg0 ioctl device: /dev/scd0 Found an accessible SCSI CDROM drive. Looking at revision of the SG interface in use... SG interface version 3.1.24; OK. CDROM model sensed sensed: ATAPI CD-R/RW 40X12 1.MB Checking for SCSI emulation... Drive is ATAPI (using SCSI host adaptor emulation) Checking for MMC style command set... Drive is MMC style DMA scatter/gather table entries: 256 table entry size: 32768 bytes maximum theoretical transfer: 3566 sectors Setting default read size to 13 sectors (30576 bytes). Verifying CDDA command set... Expected command set reads OK. Table of contents (audio tracks only): track length begin copy pre ch =========================================================== 1. 24022 [05:20.22] 0 [00:00.00] no no 2 2. 20306 [04:30.56] 24022 [05:20.22] no no 2 3. 27045 [06:00.45] 44328 [09:51.03] no no 2 4. 17167 [03:48.67] 71373 [15:51.48] no no 2 5. 19128 [04:15.03] 88540 [19:40.40] no no 2 6. 26532 [05:53.57] 107668 [23:55.43] no no 2 7. 18613 [04:08.13] 134200 [29:49.25] no no 2 8. 16435 [03:39.10] 152813 [33:57.38] no no 2 9. 19610 [04:21.35] 169248 [37:36.48] no no 2 10. 17282 [03:50.32] 188858 [41:58.08] no no 2 11. 16403 [03:38.53] 206140 [45:48.40] no no 2 12. 16345 [03:37.70] 222543 [49:27.18] no no 2 13. 19762 [04:23.37] 238888 [53:05.13] no no 2 14. 21420 [04:45.45] 258650 [57:28.50] no no 2 15. 13235 [02:56.35] 280070 [62:14.20] no no 2 16. 14405 [03:12.05] 293305 [65:10.55] no no 2 TOTAL 307710 [68:22.60] (audio only) Ripping from sector 0 (track 1 [0:00.00]) to sector 71372 (track 3 [6:00.44]) outputting to track01.cdda.wav scsi_read underrun: pos=68 len=13 read=3 retry=0 sending SG SCSI reset... FAILED: EBUSY scsi_read underrun: pos=81 len=13 read=3 retry=0 sending SG SCSI reset... FAILED: EBUSY scsi_read underrun: pos=94 len=13 read=3 retry=0 sending SG SCSI reset... FAILED: EBUSY scsi_read underrun: pos=107 len=13 read=3 retry=0 sending SG SCSI reset... FAILED: EBUSY scsi_read underrun: pos=120 len=13 read=3 retry=0 sending SG SCSI reset... FAILED: EBUSY scsi_read underrun: pos=133 len=13 read=3 retry=0 sending SG SCSI reset... FAILED: EBUSY scsi_read underrun: pos=146 len=13 read=3 retry=0 sending SG SCSI reset... FAILED: EBUSY scsi_read underrun: pos=159 len=13 read=3 retry=0 sending SG SCSI reset... FAILED: EBUSY scsi_read underrun: pos=172 len=13 read=3 retry=0 sending SG SCSI reset... FAILED: EBUSY scsi_read underrun: pos=185 len=7 read=3 retry=0 sending SG SCSI reset... FAILED: EBUSY (== PROGRESS == [> | 000018 00 ] == :-P . ==) my dmesg is full of scsi : aborting command due to timeout : pid 510926, scsi0, channel 0, id 0, lun 0 0xbe 00 00 00 00 a4 00 00 0d f8 00 00 hdd: lost interrupt scsi : aborting command due to timeout : pid 510927, scsi0, channel 0, id 0, lun 0 0xbe 00 00 00 00 b1 00 00 0d f8 00 00 hdd: lost interrupt scsi : aborting command due to timeout : pid 510928, scsi0, channel 0, id 0, lun 0 0xbe 00 00 00 00 be 00 00 07 f8 00 00 hdd: lost interrupt scsi : aborting command due to timeout : pid 510929, scsi0, channel 0, id 0, lun 0 0xbe 00 00 00 00 30 00 00 0d f8 00 00 hdd: lost interrupt Ive applied the latest flash to the cdrw drive what else can I try? Regards Laurence Baldwin Cape Town South Africa --- >8 ---- List archives: http://www.xiph.org/archives/ Paranoia homepage: http://www.xiph.org/paranoia/ To unsubscribe from this list, send a message to '[email protected]' containing only the word 'unsubscribe' in the body. No subject is needed. Unsubscribe messages sent to the list will be ignored/filtered.