| Newsgroups |
gmane.comp.audio.eac.user |
| Message-ID |
<[email protected]> |
Jeff, rather than hawking competing, commercial products on the EAC discussion group, while insulting all of the members who choose to use EAC, your time would be better spent developing some computer skills. That way, tasks like configuring Exact Audio Copy, or updating your company's website (unchanged since 2009 and looks like something from GeoCities), would be much less challenging to you.
To those who would prefer an easier-to-configure alternative to Exact Audio Copy, look at Easy Audio Copy, which offers a free 14 day trial. Buying it gives back to Andre, who has generously made Exact Audio Copy available at no cost for about 18 years.
For those who would like to try and/or buy Easy Audio Copy, here’s a link to the the website: http://www.easyaudiocopy.com/
Regards,
Fred Maxwell
Moderator, Exact Audio Copy Yahoogroup
> On May 4, 2016, at 5:35 PM, 'jeff nolan' [email protected] [EAC] <[email protected]> wrote:
>
>
> Go buy dbpoweramp. $39. EAC is for people who have nothing better to do than screw around with their computers all day. Best $ I ever spent.
>
>
>
> From: [email protected] <mailto:[email protected]> [mailto:[email protected] <mailto:[email protected]>]
> Sent: Tuesday, May 03, 2016 1:45 PM
> To: [email protected] <mailto:[email protected]>
> Subject: RE: [EAC] Have never figured out EAC!
>
>
>
>
>
> Hi!
>
>
>
> I followed instructions laid out here by others (settings/wizard use) and I come to this main work screen
>
>
>
> Aha!
>
>
>
> I have it working, it says it is burning wavs but the folder contains mp3s – great –
>
>
>
> Thank you guys.
>
>
>
> Sooo…. Even though I selected 320 kps, each file has a diff kps (154-192)
>
>
>
> It does not say VBR, but is that what the program is doing? Do I want this varying kps for mp3s flac consideration aside?
>
>
>
>
>
>
>
> From: [email protected] <mailto:[email protected]> [mailto:[email protected] <mailto:[email protected]>]
> Sent: Saturday, April 23, 2016 11:08 AM
> To: [email protected] <mailto:[email protected]>
> Subject: RE: [EAC] Have never figured out EAC!
>
>
>
>
>
> FYI – I’m working on everything you folks mentioned.
>
>
>
> Was out of commission last week, so I’ll be back if I have Qs.
>
>
>
> Thanks so much for your words and time!
>
>
>
> Bob
>
>
>
> From: [email protected] <mailto:[email protected]> [mailto:[email protected] <mailto:[email protected]>]
> Sent: Saturday, April 16, 2016 5:33 PM
> To: [email protected] <mailto:[email protected]>
> Subject: Re: [EAC] Have never figured out EAC!
>
>
>
>
>
> Yes, it really matters. The kinds of audible ticks that often get introduced by cd read errors are far worse from an audibility standpoint than are the the effects of carefully crafted psychoacoustic models on which high quality audio data reduction algorithms are based. Obviously, if one is dealing with a superb condition CD in a very good drive, then there may not be errors with CDex or any decent ripper. But the problem is that you can’t be sure that there were none if your software isn’t trustworthy.
>
>
>
> While proclaiming the audibility of MP3 degradation is undoubtedly popular, ABX comparisons between 320Kbps MP3 files and WAV files from the same CD often produce results that are little better than chance. While samples have created to reveal differences between the two, on most music, the differences are inaudible. (Note: Let’s stick with science and avoid the oh-so-common assertions that all who can’t hear differences lack the superb hearing, fine listening skills, or revealing audio equipment of the writer disputing the inaudibility; I really don’t want this discussion devolving into that.)
>
>
>
> All of that said, I do rip to AAC (lossless) since storage cost per song approaches $0. I’ve got an iPod Classic in which I’ve put a dual 256GB SDHC adapter, giving me half a terabyte of storage for AAC files. I like music a lot, but I don’t a lot of music, so for the few hundred albums I’ve got, the storage is gross overkill even with uncompressed files.
>
>
>
> Regards,
>
> Fred Maxwell
>
>
>
>> On Apr 16, 2016, at 7:53 PM, Kit Kimes kitkimes-/[email protected] <mailto:kitkimes-/[email protected]> [EAC] <[email protected] <mailto:[email protected]>> wrote:
>>
>>
>>
>>
>>
>> That may certainly be true. I wouldn't try to refute it. But to be fair, does
>>
>> it really matter? I've used CDex for years and if it introduces a few errors,
>>
>> they certainly aren't noticeable. I still fire up CDex if I just want to grab a
>>
>> quick copy of a library CD I'm listening to.
>>
>>
>>
>> But I started to use EAC to rip to high quality .flac files. CDs aren't HiRez
>>
>> quality music by most definitions but if you want keep the music as good as
>>
>> it is coming off the CD then ripping it to high level .flac files is the way to go.
>>
>> Ripping a CD to compressed .mp3 files definitely lowers the quality of the
>>
>> music you end up with.
>>
>>
>>
>> Kit Kimes
>>
>>
>>
>> From: "Fred Maxwell [email protected] <mailto:[email protected]> [EAC]" <[email protected] <mailto:[email protected]>>
>>
>>
>>
>> Independent tests have shown that, unlike EAC, CDex does not produce error-free rips. For example, one comparison test revealed that CDex reported zero errors while EAC and Feurio reported numerous errors on the same damaged CD in the same drive. Needless to say, errors were present in all rips.
>>
>>
>>
>> I found this:
>>
>> http://bfy.tw/5Iyk <http://bfy.tw/5Iyk>
>>
>>
>> Regards,
>>
>> Fred
>>
>>
>>
>>> On Apr 16, 2016, at 2:56 PM, Kit Kimes kitkimes-/[email protected] <mailto:kitkimes-/[email protected]> [EAC] <[email protected] <mailto:[email protected]>> wrote:
>>>
>>>
>>>
>>>
>>>
>>> I have it set up and working fine. It's been a while and honestly don't remember it being all that difficult. I think that either on the EAC website or on youtube there are tutorials to get you started. I went to the trouble because I wanted to rip everything to .flac format and because of claim that it is the most accurate ripping software.
>>>
>>>
>>>
>>> When you set it up, did you use the wizard? It so, it should work just fine when you get done.
>>>
>>>
>>>
>>> If you only want to rip to .mp3 format, I recommend using CDex. It is a free, open sourced software package that works right out of the box. It can be found on most software sites.
>>>
>>>
>>>
>>> Good luck in whatever you choose to do.
>>>
>>>
>>>
>>> Kit Kimes
>>>
>>> Oswego, IL USA
>>>
>>>
>>>
>>> From: "[email protected] <mailto:[email protected]> [EAC]" <[email protected] <mailto:[email protected]>>
>>>
>>>
>>>
>>> Hi,
>>>
>>>
>>>
>>> My attempts over the last 5 years to make EAC work (and using LAME) have met with failure. It's embarrassing really, but in the long run I'm just a consumer.
>>>
>>>
>>>
>>> I tried it again this week with my Windows 10 machine and EAC only outputs as wav files.It was my recollection that last time LAME integration was my downfall.
>>>
>>>
>>>
>>> AND not only is there no mp3 or FLAC choice, I received inconsistent error messages during wav file production (different tracks showed error each time I tried to copy a non-scratched Savoy Brown CD)
>>>
>>>
>>>
>>> Is there another command line I need to use on the path dialog screen to get mp3 choice? Do I need to put lame.exe in a very specific place? x86 folder as its own folder correct? Or in the EAC folder? Is this my problem?
>>>
>>>
>>>
>>> I am an avid music listener. When I last mp3-ed my CD collection with MusicMatch, storage was pricey and I did all files at 128 bit rate.
>>>
>>>
>>>
>>> I would love to do 320 or VBR and even consider FLAC.
>>>
>>>
>>>
>>> Could someone point me to any download and install directions that a 3rd grader could understand?
>>>
>>>
>>>
>>> Either that or I need to settle for 3rd party pay for software, but I would rather be a purist like you folks :)
>>>
>>>
>>>
>>> Do I give up and burn with Winamp (this uses LAME correct? Is this a leg up over other ripping software at least?)
>>>
>>>
>>>
>>> Ignorance is not blissful.
>>>
>>>
>>>
>>> Bob
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>
>