Re: OT/ Dat to L7 transfer problem

Jim Seaman <[email protected]>
Newsgroups gmane.comp.audio.emagic.logic.off-topic
Message-ID <[email protected]>
Adam et all,

This problem is a real mystery to me.
The track I'm recording to is my audio 1 input 1-2.
I assume this will record the dat info being sent when I press record  
and play the dat.
On this channel strip there is no indication of analog or digital input.
My choices under input on my aw8 channel strips are: input 1-2 or no  
input.
Adam you mentioned "When the track is armed, do you get levels on  
Logic's meters?"
On my audio 1 strip where I've chosen input 1-2 and output 1-2  I get  
no levels on my logic meters when the track is armed/recording and I'm  
sending dat info via spdif.
I can't find any reference in L7 to arming a track for digital  
recording.
What am I missing?
Thanks for your help so far.

Jim

=====================================================================
I've been looking for
On Sep 17, 2005, at 12:15 AM, adam milburn wrote:

> Jim wrote:	
>
>> Hi
>>
>> I am having a problem transferring an aiff file from my tascam DA 30  
>> to
>> L7.1
>> I am going spdif out of the dat 30 to digital in of my AW8 audiowerk
>> card in my G4 dual.
>> I assign the file to be saved to my mac desktop.
>> I arm a stereo audio track and press record, then I play the dat file.
>> When the file is finished playing on the dat I stop recording in L7.
>> An aiff file shows up on my desktop and is 50 mb in size.
>> When I get it to a L7 file audio window there is no information at  
>> all.
>> I've done this 4 times with no success and can find no reference on  
>> how
>> to do this in the dat or L7 manual.
>> Can anyone be of assistance.
>>
>
> Hi Jim,
>
> I don't think this is off-topic at all.
>
> Check that the input of the track you are recording to in Logic is set
> to 'digital in', rather than analog in. If you click on 'input' on the
> channel strip, you should get to choose your spdif as an input.
>
> When the track is armed, do you get levels on Logic's meters?
>
> Sounds to me like it's recording the (silent) analog ins, which is why
> you're getting an empty file.
>
> Askii
> __________________________________________
>
> http://www.minkengine.com
>
> NEW EP "gastronomical" OUT NOW on PINK SPUNK
>
> http://www.pinkspunk.com
> __________________________________________
>
>
>
>
>
>
>
>
> _______________________________________________________________________ 
> _
> Logic OT - new web forums! http://logic-users.org/forums/L-OT
> - Search the entire archive: http://logic-users.org/forums/L-OT/search
> - To UNSUBSCRIBE: email [email protected]
> Yahoo! Groups Links
>
>
>
>
>



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get Bzzzy! (real tools to help you find a job). Welcome to the Sweet Life.
http://us.click.yahoo.com/A77XvD/vlQLAA/TtwFAA/mjFolB/TM
--------------------------------------------------------------------~-> 

________________________________________________________________________
Logic OT - new web forums! http://logic-users.org/forums/L-OT
- Search the entire archive: http://logic-users.org/forums/L-OT/search
- To UNSUBSCRIBE: email [email protected] 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/logic-ot/

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.