Re: DAE tracks are not playing - PT TDM MIX 6.4.1 - Logic 7.1.1. - ADAT bridge 24 .

I had this problem from time to time.  I boiled it down to there  
being a loop or other audio file on a TDM?DAE track (eg a recycle or  
other loop I imported) that was a different resolution or bit depth  
than the session.  Logic permits this but DAE doesn't.  I also had  
trouble on my dual processor G4 that it (in os 10.3.4) would only  
function correctly in 44.1k and not 48k. So try toggling the  
resolution, quit logic restart and restart logic and reopen session.   
Also just to cover bases you have DAE and HTDM checked in the audio  
engine settings and coreaudio unchecked, right? Since in my  
experience this is likely a sample rate resolution issue, I am  
curious about the whole mindprint trio and CO2 routing.  The CO2  
seems to be a optical spidif to spidif  coax converter, not an ADAT  
to spidif converter (2-2 channel vs 8-2 channel, get it). You are  
using this from the spidif out of the ADAT bridge and not in the  
ADAT/ optical connection? Get these out of the chain and see if  
things are working.  Also try hooking up the Mindprint via analog  
connections.  IMO the issue you have here is possibly the Spidif  
conversion, and or master slave settings on the Mindprint vs the  
protools rig, or the bit depth settings are mismatched and are making  
trouble.  IMO the mindprint thing is not very good choice for this  
rig.  A Mackie Onyx Firewire , MOTU 828 Mk II or III or RME Fireface  
400 would give you a great input stage and allow you to use whichever  
you choose as a coreaudio interface, looping back into the ADAT  
bridge and allowing you to avoid using ESB and opening up some plug  
in chips in the process.
On Jan 16, 2009, at 12:02 AM, Stefano Socci wrote:

> Message posted by Stefano Socci <[email protected]>:
>
> Hi guys
>
> My name is Stefano.
> First post here.
>
> I need your help about an issue on my system that is:
>
> G4 FW 800 dual sonnet 1.8 (2 gb ram) OS 10.3.9
> TDM MIX w ADAT bridge24
> Mix core only
> Mindprint TRIO SPDIF (clock source set to SPDIF via optic to coaxial
> connection with M audio CO2)
> Logic PRO 7.1.1.
> PT TDM 6.4.1(quicktime 6.5..not7)
>
> Before writing;
> I have already made a "search" on my own on this forum about my issue.
> I found a couple of posts that are "similar" to my issue but they  
> do not
> answer my doubt.
>
> So..the problem is:
>
> Tracks set to "DAE" are not playing.
>
> Everything is fine if I use all tracks on "DTDM".
> Core audio is disabled.
> I have ridden in a post that I have to set the built-in audio in the
> audio/midi setup as the main in/out.
> ..and of course to disable the Digi HW..
> Is this correct?
>
> And more...I can only play DAE tracks if they are "AUX" I mean that  
> I have
> in my session 6 EXS TDM that are correctly playing.
> Just one note: TDM EXS are not correctly muted when I try to mute  
> or solo
> them.
> I (obviously) would like to use my DAE plugins inside Logic  
> sessions...in
> audio tracks also..
>
> Another issue:
>
> I created 2 DTDM busses
>
> bus 1 for the Long reverb -> that goes to ESB TDM 1-2 -> out 1-2
> bus 2 for the short reverb -> that goes to ESB TDM 3-4 -> out 1-2
>
> Trying to inserting D-verb on those busses I get error (TDM error  
> 41) and I
> can not insert the plugin.
>
> I bought the system used on Ebay...so I did not have any system CD
> installer.
> I boought the PT TDM installer on the digi website..it is the only  
> installer
> I got.
>
> I have installed it and in the application menu I see I have got  
> the digi
> test.
>
> I ran it and everything is ok.
>
> I have ridden on the web that any system needs a specifical DAE  
> version.
> Is there any way to check whic is the actual DAE version installed  
> on my
> system?
> I tried to check in my G4 but I did not find it.
>
> I need your help about.
>
> I would really appreciate also a simple link to another post where you
> already talk about this issues.
>
> Thanks for now for looking my post.
>
> Cheers!
>
> PS: I'm from Italy and I beg your pardon for my bad english.
>
> 



[Non-text portions of this message have been removed]


------------------------------------

________________________________________________________________________
Logic TDM Users Group - new forums! http://logic-users.org/forums/L-TDM
- To UNSUBSCRIBE: email [email protected]
- Search the entire archive: http://logic-users.org/forums/L-TDM/searchYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/logic-tdm/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/logic-tdm/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:[email protected] 
    mailto:[email protected]

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/