Re: [SoundDiver] Re:AMT on XP issue (Unitor Control / Virus Control)

GRAHAM ATKINS <[email protected]>
Newsgroups gmane.comp.audio.emagic.sounddiver
Message-ID <[email protected]>
Right,

I've just managed to find the manual PDF and looked at that cable you  
mention. The pin
numbers are the giveaway. A straight cable would connect like for like  
pins 1-1, 2-2...etc.
If you look at the pin numbering they aren't connected like that so  
looks like it is a xover
cable.

Good Luck

Graham

On Oct 8, 2008, at 10:30, Microcode List wrote:

> Yes, I agree on the Midi din point you make.
>
> So, to further clarify I am talking about the cable between the AMT8  
> and my computer. A DB9 Straight cable.
>
> Now, someone pointed me to the manual, and for the DB9 conneciton on  
> page 71 or 72 (cant remember now) I am having a friend do up a cable  
> for me. I still kind of find it surprising that a straight cable is  
> not the correct configuraiton. However, the manual must be right.
>
> But, in the meantime I have decided to use USB which I have also  
> used in the past with this unit. It has installed ok, but still no  
> sucsess. I am trying to nail down the problem....
>
> One question: For a Windows XP install which driver pack in 227 is  
> most appropriate, the NT, the 2k or the 9x driver?
>
> Thanks again,
> RDP
>



[Non-text portions of this message have been removed]


------------------------------------

________________________________________________________________________
SoundDiver Users Group - new forums! http://logic-users.org/forums/SD
- To UNSUBSCRIBE: email sounddiver-users-unsubscribe-hHKSG33TihhbjbujkaE4pw@public.gmane.org
- Search the entire archive: http://logic-users.org/forums/SD/searchYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/sounddiver-users/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/sounddiver-users/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:[email protected] 
    mailto:sounddiver-users-fullfeatured-hHKSG33TihhbjbujkaE4pw@public.gmane.org

<*> To unsubscribe from this group, send an email to:
    sounddiver-users-unsubscribe-hHKSG33TihhbjbujkaE4pw@public.gmane.org

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.