Re: Bacula or Drive problem?

Bill Arlofski via Bacula-users schrieb am 13.06.25 um 19:48:
> On 6/12/25 10:32 AM, Dr. Thorsten Brandau via Bacula-users wrote:
>>
>> Hi Bill
>>
>> thank you for your as always helpful insights.
>
> You are more than welcome, Thorsten. :)
>
>
>> I was not aware of the conflict between the libraries and baculas 
>> autoclean feature. Immediately I turned the one of the lib off.
>>
>> I test drove some time ago the alternate MTX script. It worked well 
>> for some time but I ran in some kind of problem I do not remember. 
>> Last but not least, the original script worked well after an update. 
>> I believe it something to do with python on my system, which pretty 
>> effectively was kind of broken (Suse Tumbleweed).
> Funny, because the original `mtx-changer` combination bash & perl 
> script has not been touched by developers in many years. Not sure what 
> update you are thinking of. :)
>
>
>> What is the advantage of the alternate tapealert? From first 
>> impression of your github I do not see any...
>
> On https://github.com/waa/bacula-tapealert see the two secti
> ons "THE PROBLEM", and "THE SOLUTION":
>
> - Much better logging
> - Automatic /dev/sg node detection (this is one of the most important 
> I think)
> - Email an admin when TapeAlerts are reported
>
>
>> (and running it  manually tries to log into an non-existing 
>> directory, might be abetter idea to log in standard to /var/log 
>> instead).
>
> Good point. It was written on a system running Bacula Enterprise, and 
> of course, /opt/bacula/log is the default location for logs. But, 
> logging is disabled by default, and of course this is simply fixed by 
> using the `-f` option to specify the exact path and filename you would 
> like to log to. ;)
>
>
>> The mtx command gave the following reply:
>> mtx: Request Sense: Long Report=yes
>> mtx: Request Sense: Valid Residual=no
>> mtx: Request Sense: Error Code=70 (Current)
>> mtx: Request Sense: Sense Key=Illegal Request
>> mtx: Request Sense: FileMark=no
>> mtx: Request Sense: EOM=no
>> mtx: Request Sense: ILI=no
>> mtx: Request Sense: Additional Sense Code 
> = 20
>> mtx: Request Sense: Additional Sense Qualifier = 00
>> mtx: Request Sense: Field in Error = 00
>> mtx: Request Sense: BPV=no
>> mtx: Request Sense: Error in CDB=yes
>> mtx: Request Sense: SKSV=yes
>> mtx: Request Sense: Field Pointer = 00 00
>> READ ELEMENT STATUS Command Failed
>>
>>
>> So, what does this mean?
> Your tape library is either broken, is not compatible with mtx (lol, 
> not likely), or you are pointing to the wrong device node (also not 
> likely).
>
> Your library will never work with Bacula until and unless you are able 
> to get mtx status outputs from the command line, and can load/unload 
> tapes using mtx too.
>
>
> Best regards,
> Bill
okay, let's solve the hardware issue first. I am a bit pissed because I 
just had to spend several thousands of EUR for a new tape, when the 
Tandberg one broke and the extenden warranty was nilled. And it is 
broken again...

I don't think I have the wrong device, as I a) only have one tape/lib 
attached and b) all the other sg* deviced turn out more error messages ;-)

Thanks. I will give probably your scripts another go after solving this.

Cheers

T


_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users