[PATCH 10/15] clk: rockchip: rk3588: Use SPLL_HZ constant

The SPLL rate is set to 702 MHz in SPL. Replace '702 * MHz' with use of
the SPLL_HZ constant to enhance readability.

Signed-off-by: Jonas Karlman <[email protected]>
---
 drivers/clk/rockchip/clk_rk3588.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/rockchip/clk_rk3588.c b/drivers/clk/rockchip/clk_rk3588.c
index c48743d8296f..1006102f4cf4 100644
--- a/drivers/clk/rockchip/clk_rk3588.c
+++ b/drivers/clk/rockchip/clk_rk3588.c
@@ -777,7 +777,7 @@ static ulong rk3588_mmc_get_clk(struct rk3588_clk_priv *priv, ulong clk_id)
 		sel = (con & DCLK_DECOM_SEL_MASK) >>
 		      DCLK_DECOM_SEL_SHIFT;
 		if (sel == DCLK_DECOM_SEL_SPLL)
-			prate = 702 * MHz;
+			prate = SPLL_HZ;
 		else
 			prate = priv->gpll_hz;
 		return DIV_TO_RATE(prate, div);
@@ -817,9 +817,9 @@ static ulong rk3588_mmc_set_clk(struct rk3588_clk_priv *priv,
 		}
 		break;
 	case DCLK_DECOM:
-		if (!(702 * MHz % rate)) {
+		if (!(SPLL_HZ % rate)) {
 			src_clk = DCLK_DECOM_SEL_SPLL;
-			div = DIV_ROUND_UP(702 * MHz, rate);
+			div = DIV_ROUND_UP(SPLL_HZ, rate);
 		} else {
 			src_clk = DCLK_DECOM_SEL_GPLL;
 			div = DIV_ROUND_UP(priv->gpll_hz, rate);
@@ -942,7 +942,7 @@ static ulong rk3588_aclk_vop_get_clk(struct rk3588_clk_priv *priv, ulong clk_id)
 		else if (sel == ACLK_VOP_ROOT_SEL_NPLL)
 			parent = priv->npll_hz;
 		else
-			parent = 702 * MHz;
+			parent = SPLL_HZ;
 		return DIV_TO_RATE(parent, div);
 	case ACLK_VOP_LOW_ROOT:
 		con = readl(&cru->clksel_con[110]);
-- 
2.54.0