[PATCH v4 1/9] rockchip: scripts: remove rkmux.py

It's not U-Boot's core business to host a script
to create enums from datasheets where it's unknown
that it has ever been used for any Rockchip SoCs sold
after rk3288. We don't need it to compile, so remove this
relict from the past.

Signed-off-by: Johan Jonker <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
---
 MAINTAINERS         |   1 -
 doc/README.rockchip |   7 --
 scripts/pylint.base |   1 -
 tools/rkmux.py      | 218 --------------------------------------------
 4 files changed, 227 deletions(-)
 delete mode 100755 tools/rkmux.py

diff --git a/MAINTAINERS b/MAINTAINERS
index 86ab813aee4b..6dad4875a495 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -538,7 +538,6 @@ F:	drivers/spi/rk_spi.[ch]
 F:	tools/rkcommon.c
 F:	tools/rkcommon.h
 F:	tools/rkimage.c
-F:	tools/rkmux.py
 F:	tools/rksd.c
 F:	tools/rkspi.c
 
diff --git a/doc/README.rockchip b/doc/README.rockchip
index 96fa49d697bc..5a608ed0bce3 100644
--- a/doc/README.rockchip
+++ b/doc/README.rockchip
@@ -651,13 +651,6 @@ SPI flash.
 
 See above for instructions on how to write a SPI image.
 
-rkmux.py
---------
-
-You can use this script to create #defines for SoC register access. See the
-script for usage.
-
-
 Device tree and driver model
 ----------------------------
 
diff --git a/scripts/pylint.base b/scripts/pylint.base
index bc39e2385a31..a0a473b6d998 100644
--- a/scripts/pylint.base
+++ b/scripts/pylint.base
@@ -298,7 +298,6 @@ tools_patman_status 8.52
 tools_patman_test_checkpatch 8.51
 tools_patman_test_settings 8.78
 tools_qconfig 9.79
-tools_rkmux 7.10
 tools_rmboard 8.06
 tools_u_bootlib___init__.py 0.00
 tools_u_bootlib___main__.py 7.78
diff --git a/tools/rkmux.py b/tools/rkmux.py
deleted file mode 100755
index 1226ee201c3b..000000000000
--- a/tools/rkmux.py
+++ /dev/null
@@ -1,218 +0,0 @@
-#!/usr/bin/env python3
-
-# Script to create enums from datasheet register tables
-#
-# Usage:
-#
-# First, create a text file from the datasheet:
-#    pdftotext -layout /path/to/rockchip-3288-trm.pdf /tmp/asc
-#
-# Then use this script to output the #defines for a particular register:
-#    ./tools/rkmux.py GRF_GPIO4C_IOMUX
-#
-# It will create output suitable for putting in a header file, with SHIFT and
-# MASK values for each bitfield in the register.
-#
-# Note: this tool is not perfect and you may need to edit the resulting code.
-# But it should speed up the process.
-
-import csv
-import re
-import sys
-
-tab_to_col = 3
-
-class RegField:
-    def __init__(self, cols=None):
-        if cols:
-            self.bits, self.attr, self.reset_val, self.desc = (
-                [x.strip() for x in cols])
-            self.desc = [self.desc]
-        else:
-            self.bits = ''
-            self.attr = ''
-            self.reset_val = ''
-            self.desc = []
-
-    def Setup(self, cols):
-        self.bits, self.attr, self.reset_val = cols[0:3]
-        if len(cols) > 3:
-            self.desc.append(cols[3])
-
-    def AddDesc(self, desc):
-        self.desc.append(desc)
-
-    def Show(self):
-        print(self)
-        print()
-        self.__init__()
-
-    def __str__(self):
-        return '%s,%s,%s,%s' % (self.bits, self.attr, self.reset_val,
-                                '\n'.join(self.desc))
-
-class Printer:
-    def __init__(self, name):
-        self.first = True
-        self.name = name
-        self.re_sel = re.compile("[1-9]'b([01]+): (.*)")
-
-    def __enter__(self):
-        return self
-
-    def __exit__(self, type, value, traceback):
-        if not self.first:
-            self.output_footer()
-
-    def output_header(self):
-        print('/* %s */' % self.name)
-        print('enum {')
-
-    def output_footer(self):
-        print('};');
-
-    def output_regfield(self, regfield):
-        lines = regfield.desc
-        field = lines[0]
-        #print 'field:', field
-        if field in ['reserved', 'reserve', 'write_enable', 'write_mask']:
-            return
-        if field.endswith('_sel') or field.endswith('_con'):
-            field = field[:-4]
-        elif field.endswith(' iomux'):
-            field = field[:-6]
-        elif field.endswith('_mode') or field.endswith('_mask'):
-            field = field[:-5]
-        #else:
-            #print 'bad field %s' % field
-            #return
-        field = field.upper()
-        if ':' in regfield.bits:
-            bit_high, bit_low = [int(x) for x in regfield.bits.split(':')]
-        else:
-            bit_high = bit_low = int(regfield.bits)
-        bit_width = bit_high - bit_low + 1
-        mask = (1 << bit_width) - 1
-        if self.first:
-            self.first = False
-            self.output_header()
-        else:
-            print()
-        out_enum(field, 'shift', bit_low)
-        out_enum(field, 'mask', mask)
-        next_val = -1
-        #print 'lines: %s', lines
-        for line in lines:
-            m = self.re_sel.match(line)
-            if m:
-                val, enum = int(m.group(1), 2), m.group(2)
-                if enum not in ['reserved', 'reserve']:
-                    out_enum(field, enum, val, val == next_val)
-                    next_val = val + 1
-
-
-def process_file(name, fd):
-    field = RegField()
-    reg = ''
-
-    fields = []
-
-    def add_it(field):
-        if field.bits:
-            if reg == name:
-                fields.append(field)
-            field = RegField()
-        return field
-
-    def is_field_start(line):
-       if '=' in line or '+' in line:
-           return False
-       if (line.startswith('gpio') or line.startswith('peri_') or
-                line.endswith('_sel') or line.endswith('_con')):
-           return True
-       if not ' ' in line: # and '_' in line:
-           return True
-       return False
-
-    for line in fd:
-        line = line.rstrip()
-        if line[:4] in ['GRF_', 'PMU_', 'CRU_']:
-            field = add_it(field)
-            reg = line
-            do_this = name == reg
-        elif not line or not line.startswith(' '):
-            continue
-        line = line.replace('\xe2\x80\x99', "'")
-        leading = len(line) - len(line.lstrip())
-        line = line.lstrip()
-        cols = re.split(' *', line, 3)
-        if leading > 15 or (len(cols) > 3 and is_field_start(cols[3])):
-            if is_field_start(line):
-                field = add_it(field)
-            field.AddDesc(line)
-        else:
-            if cols[0] == 'Bit' or len(cols) < 3:
-                continue
-            #print
-            #print field
-            field = add_it(field)
-            field.Setup(cols)
-    field = add_it(field)
-
-    with Printer(name) as printer:
-        for field in fields:
-            #print field
-            printer.output_regfield(field)
-            #print
-
-def out_enum(field, suffix, value, skip_val=False):
-    str = '%s_%s' % (field.upper(), suffix.upper())
-    if not skip_val:
-        tabs = tab_to_col - len(str) / 8
-        if value > 9:
-            val_str = '%#x' % value
-        else:
-            val_str = '%d' % value
-
-        str += '%s= %s' % ('\t' * tabs, val_str)
-    print('\t%s,' % str)
-
-# Process a CSV file, e.g. from tabula
-def process_csv(name, fd):
-    reader = csv.reader(fd)
-
-    rows = []
-
-    field = RegField()
-    for row in reader:
-        #print field.desc
-        if not row[0]:
-            field.desc.append(row[3])
-            continue
-        if field.bits:
-            if field.bits != 'Bit':
-                rows.append(field)
-        #print row
-        field = RegField(row)
-
-    with Printer(name) as printer:
-        for row in rows:
-            #print field
-            printer.output_regfield(row)
-            #print
-
-fname = sys.argv[1]
-name = sys.argv[2]
-
-# Read output from pdftotext -layout
-if 1:
-    with open(fname, 'r') as fd:
-        process_file(name, fd)
-
-# Use tabula
-# It seems to be better at outputting text for an entire cell in one cell.
-# But it does not always work. E.g. GRF_GPIO7CH_IOMUX.
-# So there is no point in using it.
-if 0:
-    with open(fname, 'r') as fd:
-        process_csv(name, fd)
-- 
2.39.5