Re: Compile bochs on Msys/Mingw32

Ignore my posting,  I used

./sh .conf.win32-cygwin
make

which fails, however

./configure
make

works fine.

Regards,
Hans.

On 02/02/2018 09:51, ht-lab wrote:
> Hi All,
>
> I am trying to compile Bochs 2.6.9 under Win10 Msys/MingW32 and are 
> getting some build errors. The first one is:
>
> /g++ -c  -I.. -I../.. -I./.. -I./../.. -I../../instrument/stubs 
> -I./../../instrument/stubs -O3 -Wall -Wno-format -mno-ms-bitfields 
> -DWIN32 -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES    eth_win32.cc -o 
> eth_win32.oeth_win32.cc:229:1: error: narrowing conversion of 
> '2863311530' from 'unsigned int' to 'bpf_int32 {aka int}' inside { } 
> [-Wnarrowing]//
> // };//
> // ^//
> //makefile:112: recipe for target `eth_win32.o' failed//
> //make[1]: *** [eth_win32.o] Error 1//
> //make[1]: Leaving directory `D:/bochs-2.6.9/iodev/network'//
> //makefile:320: recipe for target `iodev/network/libnetwork.a' failed//
> //make: *** [iodev/network/libnetwork.a] Error 2/
>
> I adding the -Wno-narrowing to the CFLAGS section which gets the build 
> a lot further but then stops at:
>
> g++ -o bximage -O3 -Wall -Wno-format -mno-ms-bitfields -Wno-narrowing 
> -DWIN32 -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES misc/bximage.o 
> misc/hdimage.o misc/vmware3.o misc/vmware4.o misc/vpc-img.o misc/vbox.o
> g++ -o bxhub -O3 -Wall -Wno-format -mno-ms-bitfields -Wno-narrowing 
> -DWIN32 -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES misc/bxhub.o misc/netutil.o
> misc/bxhub.o:bxhub.cc:(.text+0x24): undefined reference to 
> `_imp__closesocket@4'
> misc/bxhub.o:bxhub.cc:(.text+0x60): undefined reference to 
> `_imp__WSACleanup@0'
> misc/bxhub.o:bxhub.cc:(.text+0xd2): undefined reference to `_imp__ntohs@4'
> misc/bxhub.o:bxhub.cc:(.text+0x3f7): undefined reference to 
> `_imp__ntohs@4'
> misc/bxhub.o:bxhub.cc:(.text+0x548): undefined reference to 
> `_imp__ntohs@4'
> misc/bxhub.o:bxhub.cc:(.text+0x685): undefined reference to 
> `_imp__sendto@24'
> misc/bxhub.o:bxhub.cc:(.text+0xa0c): undefined reference to 
> `_imp__ntohs@4'
> misc/bxhub.o:bxhub.cc:(.text.startup+0x50): undefined reference to 
> `_imp__WSAStartup@8'
> misc/bxhub.o:bxhub.cc:(.text.startup+0xaf): undefined reference to 
> `_imp__socket@12'
> misc/bxhub.o:bxhub.cc:(.text.startup+0xe8): undefined reference to 
> `_imp__htonl@4'
> misc/bxhub.o:bxhub.cc:(.text.startup+0x10c): undefined reference to 
> `_imp__htons@4'
> misc/bxhub.o:bxhub.cc:(.text.startup+0x140): undefined reference to 
> `_imp__bind@12'
> misc/bxhub.o:bxhub.cc:(.text.startup+0x15e): undefined reference to 
> `_imp__ntohs@4'
> misc/bxhub.o:bxhub.cc:(.text.startup+0x2c0): undefined reference to 
> `_imp__select@20'
> misc/bxhub.o:bxhub.cc:(.text.startup+0x2e6): undefined reference to 
> `__WSAFDIsSet@8'
> misc/bxhub.o:bxhub.cc:(.text.startup+0x3a6): undefined reference to 
> `_imp__sendto@24'
> misc/bxhub.o:bxhub.cc:(.text.startup+0x402): undefined reference to 
> `_imp__recvfrom@24'
> misc/bxhub.o:bxhub.cc:(.text.startup+0x4df): undefined reference to 
> `_imp__sendto@24'
> misc/bxhub.o:bxhub.cc:(.text.startup+0x6db): more undefined references 
> to `_imp__sendto@24' follow
> collect2.exe: error: ld returned 1 exit status
> makefile:257: recipe for target `bxhub' failed
> make: *** [bxhub] Error 1
>
> My gcc is: gcc.exe (i686-posix-dwarf-rev1, Built by MinGW-W64 project) 
> 7.2.0, I use the default .conf.win32-cygwin file.
>
> It looks like some network object is not being linked in but I am not 
> sure which one, any ideas?
>
> Thanks,
> Hans.
>
>
>

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot

_______________________________________________
bochs-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bochs-developers