Re: Please some one write blog on gmt 5 installation

Peter,

I attached my ConfigUser.cmake, as you asked.

Appears very similar with yours. I hope that just including ".." in cmake
will work.

Regards,

Marcelo


On Fri, Jan 31, 2014 at 4:42 PM, Peter <[email protected]> wrote:

> Thank you so much for your quick response, I got it ../ is previous
> directory and where to define netcdf and hdf , gshhg and gcw ? can you
> send me your cmake file(ConfigUser.cmake) I can use it as reference..
>
> -Peter
>
>
> On Sat, Feb 1, 2014 at 12:06 AM, Marcelo Banik <[email protected]>wrote:
>
>> Hi Peter,
>>
>> Could not be the only problem, but the correct cmake command is:
>>
>> cmake -DCMAKE_INSTALL_PREFIX=/home/peter/software/gmt5 ..
>>
>> The ".." is very important here.
>>
>> Regards,
>>
>> Marcelo
>>
>>
>>
>> On Fri, Jan 31, 2014 at 4:26 PM, Peter <[email protected]> wrote:
>>
>>> Not working, Please someone help me... what I have to change in
>>> ConfigUser.cmake ? where to set netcdf and hdf ? what I am doing wrong ?
>>>
>>> I tried as you said
>>>
>>> $ tar -xf gmt-5.1.0-src.tar.gz
>>> $ cd gmt-5.1.0/
>>> $ cd cmake/
>>> $ cp ConfigUserTemplate.cmake ConfigUser.cmake
>>> $ cd ..
>>> $ mkdir build
>>> $ cd build
>>> $ cmake -DCMAKE_INSTALL_PREFIX=/home/peter/software/gmt5
>>> CMake Error: The source directory "/home/peter/gmt-5.1.0/build" does not
>>> appear to contain CMakeLists.txt.
>>> Specify --help for usage, or press the help button on the CMake GUI.
>>>
>>> $ cat ConfigUser.cmake
>>>
>>> #
>>> # $Id: ConfigUserTemplate.cmake 12425 2013-11-01 10:09:27Z fwobbe $
>>> #
>>> # Copyright (c) 1991-2013 by P. Wessel, W. H. F. Smith, R. Scharroo, J.
>>> Luis and F. Wobbe
>>> # See LICENSE.TXT file for copying and redistribution conditions.
>>> #
>>> # This program is free software; you can redistribute it and/or modify it
>>> # under the terms of the GNU Lesser General Public License as published
>>> by the
>>> # Free Software Foundation; version 3 or any later version.
>>> #
>>> # This program is distributed in the hope that it will be useful, but
>>> WITHOUT
>>> # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>>> # FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General Public
>>> License
>>> # for more details.
>>> #
>>> # Contact info: gmt.soest.hawaii.edu
>>>  #
>>> ----------------------------------------------------------------------------
>>>
>>> # Use this file to override variables in 'ConfigDefault.cmake' on a
>>> per-user
>>> # basis.  First copy 'ConfigUserTemplate.cmake' to 'ConfigUser.cmake',
>>> then
>>> # edit 'ConfigUser.cmake'.  'ConfigUser.cmake' is not version controlled
>>> # (currently listed in svn:ignore property)
>>> #
>>> # Note: CMake considers an empty string, "FALSE", "OFF", "NO", or any
>>> string
>>> # ending in "-NOTFOUND" to be false (this happens to be
>>> case-insensitive, so
>>> # "False", "off", "no", and "something-NotFound" are all false).  Other
>>> values
>>> # are true.  Thus it does not matter whether you use TRUE and FALSE, ON
>>> and
>>> # OFF, or YES and NO for your booleans.
>>>
>>> ##
>>> ## Section 1: Installation paths
>>> ##
>>>
>>> #
>>> ============================================================================
>>> # Basic setup begins here.  All settings are optional.  In most cases,
>>> setting
>>> # CMAKE_INSTALL_PREFIX should be all you need to do in order to build
>>> GMT with
>>> # reasonable defaults enabled.
>>> #
>>> ============================================================================
>>>
>>> # Installation path (usually defaults to /usr/local) [auto]:
>>> set (CMAKE_INSTALL_PREFIX "/home/peter/software")
>>>
>>> # Set install name suffix used for directories and gmt executables
>>>  # [undefined]:
>>> set (GMT_INSTALL_NAME_SUFFIX "gmt5")
>>>
>>> # Install into traditional directory structure. Disable to install a
>>> # distribution type directory structure (doc and share separated) [on]:
>>> #set (GMT_INSTALL_TRADITIONAL_FOLDERNAMES OFF)
>>>
>>> # Install convenience links for GMT modules. Disable to install only the
>>> main
>>> # gmt program and access modules as "gmt modulename options" [TRUE]:
>>> #set (GMT_INSTALL_MODULE_LINKS FALSE)
>>>
>>> #
>>> ============================================================================
>>> # Advanced configuration begins here.  Usually it is not necessary to
>>> edit any
>>> # settings below.  You should know what you are doing if you do though.
>>>  Note:
>>> # installation paths are relative to ${CMAKE_INSTALL_PREFIX} unless
>>> absolute
>>> # path is given.
>>> #
>>> ============================================================================
>>>
>>> # Set binary installation path [bin]:
>>> #set (GMT_BINDIR "bin")
>>>
>>> # Set library installation path [lib or lib64]:
>>> #set (GMT_LIBDIR "lib")
>>>
>>> # Set include installation path [include/gmt${GMT_INSTALL_NAME_SUFFIX}]:
>>> #set (GMT_INCLUDEDIR "include/gmt")
>>>
>>> # Set share installation path [share or
>>> share/gmt${GMT_INSTALL_NAME_SUFFIX}]:
>>> #set (GMT_DATADIR "share/gmt")
>>>
>>> # Set doc installation path [share/doc or
>>> # share/doc/gmt${GMT_INSTALL_NAME_SUFFIX}]:
>>> #set (GMT_DOCDIR "share/doc/gmt")
>>>
>>> # Set manpage installation path [share/man or
>>> # share/doc/gmt${GMT_INSTALL_NAME_SUFFIX}/man]:
>>> #set (GMT_MANDIR "share/doc/gmt/man")
>>>
>>> # Install documentation files from this external location instead of
>>> creating
>>> # new PDF and HTML documents from scratch
>>> [${GMT_SOURCE_DIR}/doc_release]:
>>> #set (GMT_INSTALL_EXTERNAL_DOC OFF)
>>>
>>> # Install manual pages from this external location instead of creating
>>> the
>>> # manpages from scratch [${GMT_SOURCE_DIR}/man_release]:
>>> #set (GMT_INSTALL_EXTERNAL_MAN OFF)
>>>
>>> ##
>>> ## Section 2: Build dependencies (should only be needed if CMake cannot
>>> ## automatically detect the rights version or path.)
>>> ##
>>>
>>> # Set path to GSHHG Shoreline Database [auto]:
>>> #set (GSHHG_ROOT "gshhg_path")
>>>
>>> # Copy GSHHG files to $/coast [FALSE]:
>>> #set (COPY_GSHHG TRUE)
>>>
>>> # Set path to DCW Digital Chart of the World for GMT [auto]:
>>> #set (DCW_ROOT "dcw-gmt_path")
>>>
>>> # Copy DCW files to $/dcw [FALSE]:
>>> #set (COPY_DCW TRUE)
>>>
>>> # Set location of NetCDF (can be root directory, path to header file or
>>> path
>>> # to nc-config) [auto]:
>>> #set (NETCDF_ROOT "netcdf_install_prefix")
>>>
>>> # Set location of GDAL (can be root directory, path to header file or
>>> path to
>>> # gdal-config) [auto]:
>>> #set (GDAL_ROOT "gdal_install_prefix")
>>>
>>> # Set location of PCRE (can be root directory, path to header file or
>>> path to
>>> # pcre-config) [auto]:
>>> #set (PCRE_ROOT "pcre_install_prefix")
>>>
>>> # Set location of single precision FFTW (can be root directory or path to
>>> # header file) [auto]:
>>> #set (FFTW3_ROOT "fftw_install_prefix")
>>>
>>> # Set location of ZLIB (can be root directory or path to header file)
>>> [auto]:
>>> #set (ZLIB_ROOT "zlib_install_prefix")
>>>
>>> ##
>>> ## Section 3: GMT features
>>> ##
>>>
>>> # Enforce GPL or LGPL conformity. Use this to disable routines that
>>> cannot be
>>> # redistributed under the terms of the GPL or LGPL such as Shewchuk's
>>> # triangulation (valid values are GPL, LGPL and off) [off]:
>>> #set (LICENSE_RESTRICTED GPL)
>>>
>>> # Configure default units (possible values are SI and US) [SI]:
>>> #set (UNITS "US")
>>>
>>> # Enable file locking [FALSE]:
>>> #set (FLOCK TRUE)
>>>
>>> # Enable building of shared libraries [TRUE] (disable to use static
>>> libraries;
>>> # not recommended):
>>> #set (BUILD_SHARED_LIBS FALSE)
>>>
>>> # Build GMT shared lib with supplemental modules [TRUE]:
>>> #set (BUILD_SUPPLEMENTS FALSE)
>>>
>>> ##
>>> ## Section 4: Advanced tweaking
>>> ##
>>>
>>> #
>>> # Testing and development
>>> #
>>>
>>> # Enable running examples/tests with "ctest" or "make check"
>>> (out-of-source).
>>> # Need to set either DO_EXAMPLES, DO_TESTS or both and uncomment the
>>> following
>>> # line.
>>> #enable_testing()
>>> #set (DO_EXAMPLES TRUE)
>>> #set (DO_TESTS TRUE)
>>> # Number of parallel test jobs with "make check":
>>> #set (N_TEST_JOBS 4)
>>>
>>> # Enable this option to run GMT programs from within ${GMT_BINARY_DIR}
>>> without
>>> # installing or setting GMT_SHAREDIR and GMT_USERDIR first. This is
>>> required
>>> # for testing [OFF]:
>>> #set (SUPPORT_EXEC_IN_BINARY_DIR ON)
>>>
>>> # List extra sub-dirs of 'src' with a CMakeList.txt to build non-module
>>> codes
>>> # that link against the full gmt libs (not just the API; for building
>>> codes
>>> # that only need the GMT API, see the gmtextension project).
>>> #set (EXTRA_BUILD_DIRS apidemo)
>>>
>>> # Directory in which to install the release sources per default
>>> # [${GMT_BINARY_DIR}/gmt-${GMT_PACKAGE_VERSION}]:
>>> #set (GMT_RELEASE_PREFIX "release-src-prefix")
>>>
>>> # If set to false, image conversion from PS images to PNG and PDF does
>>> # not depend on the gmt binary target. Note: "make gmt" is then required
>>> # before docs_depends [TRUE].
>>> #set (GMT_DOCS_DEPEND_ON_GMT FALSE)
>>>
>>> #
>>> # Debugging
>>> #
>>>
>>> # Set build type can be: empty, Debug, Release, RelWithDebInfo or
>>> MinSizeRel
>>> # [Release]:
>>> #set (CMAKE_BUILD_TYPE Debug)
>>>
>>> # Extra debugging for developers:
>>> #add_definitions(-DDEBUG)
>>> #add_definitions(-DMEMDEBUG) # Turn on memory tracking see gmt_support.c
>>> for extra info
>>> #set (CMAKE_C_FLAGS "-Wall -Wdeclaration-after-statement") # recommended
>>> even for release build
>>> #set (CMAKE_C_FLAGS "-Wextra ${CMAKE_C_FLAGS}")            # extra
>>> warnings
>>> #set (CMAKE_C_FLAGS_DEBUG -ggdb3)                          # gdb
>>> debugging symbols
>>> #set (CMAKE_C_FLAGS_RELEASE "-ggdb3 -O2 -Wuninitialized")  # check
>>> uninitialized variables
>>> #set (CMAKE_LINK_DEPENDS_DEBUG_MODE TRUE)                  # debug link
>>> dependencies
>>>
>>> #
>>> # System specific tweaks
>>> #
>>>
>>> # This is for GCC on Solaris to avoid "relocations remain against
>>> allocatable
>>> # but non-writable sections" problems:
>>> #set (USER_GMTLIB_LINK_FLAGS -mimpure-text)
>>>
>>> # This may be needed to enable strdup and extended math functions with
>>> GCC and
>>> # Suncc on Solaris:
>>> #set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -D__EXTENSIONS__")
>>>
>>> # Do not warn when building with Windows SDK or Visual Studio Express:
>>> #set (CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_NO_WARNINGS ON)
>>>
>>> # Manually select runtime library when compiling with Windows SDK or
>>> Visual
>>> # Studio Express:
>>> #set (CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS c:/Windows/System32/msvcr100.dll)
>>>
>>> # If your NetCDF library is static (not recommended, applies to Windows
>>> only)
>>> #set (NETCDF_STATIC TRUE)
>>>
>>> # If want to rename the DLLs to something else than the default (e.g. to
>>> # append the bitness - Windows only)
>>> #if (WIN32)
>>> # set (BITAGE 32)
>>> # # Detect if we are building a 32 or 64 bits version
>>> # if (CMAKE_SIZEOF_VOID_P EQUAL 8)
>>> #   set (BITAGE 64)
>>> # endif ()
>>> # set (GMT_DLL_RENAME gmt_w${BITAGE})
>>> # set (PSL_DLL_RENAME psl_w${BITAGE})
>>> #endif(WIN32)
>>>
>>> # On Windows Visual C 2012 needs _ALLOW_KEYWORD_MACROS to build
>>> #if(MSVC11)
>>> #  add_definitions(/D_ALLOW_KEYWORD_MACROS)
>>> #endif(MSVC11)
>>>
>>> # vim: textwidth=78 noexpandtab tabstop=2 softtabstop=2 shiftwidth=2
>>>
>>> -Peter
>>>
>>>
>>> On Fri, Jan 31, 2014 at 8:10 PM, Joaquim Luis <[email protected]> wrote:
>>>
>>>> No.
>>>>
>>>> GMT5 use cmake not autotools as the building system so this won't work.
>>>>
>>>>
>>>>  then you commonly enter the created tree of directories searching for
>>>>> a makefike. In this directory, you run:
>>>>>
>>>>> ./configure
>>>>> ./make install
>>>>>
>>>>> normally you have also an INSTALL and README files in the same
>>>>> directory.
>>>>>
>>>>> Finally you create some links and that's all. I don't now if this is
>>>>> your case, but is the common way to do those thinks
>>>>>
>>>>> 2014/1/31, p Valdés<[email protected]>:
>>>>>
>>>>>> tar.gz file is an archive (a box with many archives) + compressed
>>>>>> (gzip)
>>>>>> file
>>>>>>
>>>>>> you need first to uncompress the file with: gunzip myfile.tar.gz
>>>>>>
>>>>>> then you need to move to your choice directory and open the package
>>>>>> (now named myfile.tar) with
>>>>>>
>>>>>> tar -xvvf myfile.tar
>>>>>>
>>>>>> 2014/1/31, Peter<[email protected]>:
>>>>>>
>>>>>>> I have downloaded all the files shown in this page
>>>>>>>
>>>>>>> http://gmt.soest.hawaii.edu/projects/gmt/wiki/BuildingGMT
>>>>>>> http://gmt.soest.hawaii.edu/projects/gmt/wiki/PackagingGMT
>>>>>>>
>>>>>>>
>>>>>>> Really didn't understand please someone help
>>>>>>>
>>>>>>> How to install ? I don't want mixup with system library I want to
>>>>>>> install
>>>>>>> here
>>>>>>>
>>>>>>> /home/peter/software/gmt/gmt5
>>>>>>>
>>>>>>> I have these files in home directory
>>>>>>>
>>>>>>> gmt-5.1.0-src.tar.gz
>>>>>>> gshhg-gmt-nc4-2.2.4.tar.gz
>>>>>>> dcw-gmt-1.1.0.tar.gz
>>>>>>>
>>>>>>> netcdf_home=/home/peter/software/netcdf/netcdf_4_3
>>>>>>> hdf_home=/home/peter/software/hdf/hdf5
>>>>>>> cmake_home=/home/peter/software/cmake/bin
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Please someone kindly help me, I am not interested to use yum as it
>>>>>>> installs old version
>>>>>>>
>>>>>>>
>>>>>>> - Peter
>>>>>>>
>>>>>>> To unsubscribe, send the message "signoff gmt-help" to
>>>>>>> [email protected]
>>>>>>>
>>>>>>>  To unsubscribe, send the message "signoff gmt-help" to
>>>>> [email protected]
>>>>>
>>>>>
>>>>>
>>>> To unsubscribe, send the message "signoff gmt-help" to
>>>> [email protected]
>>>>
>>>
>>> To unsubscribe, send the message "signoff gmt-help" to
>>> [email protected]
>>>
>>
>> To unsubscribe, send the message "signoff gmt-help" to
>> [email protected]
>>
>
> To unsubscribe, send the message "signoff gmt-help" to
> [email protected]
>

To unsubscribe, send the message "signoff gmt-help" to [email protected]

#
# $Id: ConfigUserTemplate.cmake 12425 2013-11-01 10:09:27Z fwobbe $
#
# Copyright (c) 1991-2013 by P. Wessel, W. H. F. Smith, R. Scharroo, J. Luis and F. Wobbe
# See LICENSE.TXT file for copying and redistribution conditions.
#
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by the
# Free Software Foundation; version 3 or any later version.
#
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General Public License
# for more details.
#
# Contact info: gmt.soest.hawaii.edu
# ----------------------------------------------------------------------------

# Use this file to override variables in 'ConfigDefault.cmake' on a per-user
# basis.  First copy 'ConfigUserTemplate.cmake' to 'ConfigUser.cmake', then
# edit 'ConfigUser.cmake'.  'ConfigUser.cmake' is not version controlled
# (currently listed in svn:ignore property)
#
# Note: CMake considers an empty string, "FALSE", "OFF", "NO", or any string
# ending in "-NOTFOUND" to be false (this happens to be case-insensitive, so
# "False", "off", "no", and "something-NotFound" are all false).  Other values
# are true.  Thus it does not matter whether you use TRUE and FALSE, ON and
# OFF, or YES and NO for your booleans.

##
## Section 1: Installation paths
##

# ============================================================================
# Basic setup begins here.  All settings are optional.  In most cases, setting
# CMAKE_INSTALL_PREFIX should be all you need to do in order to build GMT with
# reasonable defaults enabled.
# ============================================================================

# Installation path (usually defaults to /usr/local) [auto]:
set (CMAKE_INSTALL_PREFIX "/usr/local/GMT5.1.0")

# Set install name suffix used for directories and gmt executables
# [undefined]:
#set (GMT_INSTALL_NAME_SUFFIX "suffix")

# Install into traditional directory structure. Disable to install a
# distribution type directory structure (doc and share separated) [on]:
#set (GMT_INSTALL_TRADITIONAL_FOLDERNAMES OFF)

# Install convenience links for GMT modules. Disable to install only the main
# gmt program and access modules as "gmt modulename options" [TRUE]:
set (GMT_INSTALL_MODULE_LINKS FALSE)

# ============================================================================
# Advanced configuration begins here.  Usually it is not necessary to edit any
# settings below.  You should know what you are doing if you do though.  Note:
# installation paths are relative to ${CMAKE_INSTALL_PREFIX} unless absolute
# path is given.
# ============================================================================

# Set binary installation path [bin]:
#set (GMT_BINDIR "bin")

# Set library installation path [lib or lib64]:
#set (GMT_LIBDIR "lib")

# Set include installation path [include/gmt${GMT_INSTALL_NAME_SUFFIX}]:
#set (GMT_INCLUDEDIR "include/gmt")

# Set share installation path [share or share/gmt${GMT_INSTALL_NAME_SUFFIX}]:
#set (GMT_DATADIR "share/gmt")

# Set doc installation path [share/doc or
# share/doc/gmt${GMT_INSTALL_NAME_SUFFIX}]:
#set (GMT_DOCDIR "share/doc/gmt")

# Set manpage installation path [share/man or
# share/doc/gmt${GMT_INSTALL_NAME_SUFFIX}/man]:
#set (GMT_MANDIR "share/doc/gmt/man")

# Install documentation files from this external location instead of creating
# new PDF and HTML documents from scratch [${GMT_SOURCE_DIR}/doc_release]:
#set (GMT_INSTALL_EXTERNAL_DOC OFF)

# Install manual pages from this external location instead of creating the
# manpages from scratch [${GMT_SOURCE_DIR}/man_release]:
#set (GMT_INSTALL_EXTERNAL_MAN OFF)

##
## Section 2: Build dependencies (should only be needed if CMake cannot
## automatically detect the rights version or path.)
##

# Set path to GSHHG Shoreline Database [auto]:
set (GSHHG_ROOT "/usr/local/share/gshhg-gmt-nc4-2.2.4")

# Copy GSHHG files to $/coast [FALSE]:
#set (COPY_GSHHG TRUE)

# Set path to DCW Digital Chart of the World for GMT [auto]:
set (DCW_ROOT "/usr/local/share/dcw-gmt-1.1.0")

# Copy DCW files to $/dcw [FALSE]:
#set (COPY_DCW TRUE)

# Set location of NetCDF (can be root directory, path to header file or path
# to nc-config) [auto]:
#set (NETCDF_ROOT "netcdf_install_prefix")

# Set location of GDAL (can be root directory, path to header file or path to
# gdal-config) [auto]:
set (GDAL_ROOT "/usr/bin/gdal-config")

# Set location of PCRE (can be root directory, path to header file or path to
# pcre-config) [auto]:
#set (PCRE_ROOT "pcre_install_prefix")

# Set location of single precision FFTW (can be root directory or path to
# header file) [auto]:
#set (FFTW3_ROOT "fftw_install_prefix")

# Set location of ZLIB (can be root directory or path to header file) [auto]:
#set (ZLIB_ROOT "zlib_install_prefix")

##
## Section 3: GMT features
##

# Enforce GPL or LGPL conformity. Use this to disable routines that cannot be
# redistributed under the terms of the GPL or LGPL such as Shewchuk's
# triangulation (valid values are GPL, LGPL and off) [off]:
#set (LICENSE_RESTRICTED GPL)

# Configure default units (possible values are SI and US) [SI]:
#set (UNITS "US")

# Enable file locking [FALSE]:
#set (FLOCK TRUE)

# Enable building of shared libraries [TRUE] (disable to use static libraries;
# not recommended):
#set (BUILD_SHARED_LIBS FALSE)

# Build GMT shared lib with supplemental modules [TRUE]:
#set (BUILD_SUPPLEMENTS FALSE)

##
## Section 4: Advanced tweaking
##

#
# Testing and development
#

# Enable running examples/tests with "ctest" or "make check" (out-of-source).
# Need to set either DO_EXAMPLES, DO_TESTS or both and uncomment the following
# line.
#enable_testing()
#set (DO_EXAMPLES TRUE)
#set (DO_TESTS TRUE)
# Number of parallel test jobs with "make check":
#set (N_TEST_JOBS 4)

# Enable this option to run GMT programs from within ${GMT_BINARY_DIR} without
# installing or setting GMT_SHAREDIR and GMT_USERDIR first. This is required
# for testing [OFF]:
#set (SUPPORT_EXEC_IN_BINARY_DIR ON)

# List extra sub-dirs of 'src' with a CMakeList.txt to build non-module codes
# that link against the full gmt libs (not just the API; for building codes
# that only need the GMT API, see the gmtextension project).
#set (EXTRA_BUILD_DIRS apidemo)

# Directory in which to install the release sources per default
# [${GMT_BINARY_DIR}/gmt-${GMT_PACKAGE_VERSION}]:
#set (GMT_RELEASE_PREFIX "release-src-prefix")

# If set to false, image conversion from PS images to PNG and PDF does
# not depend on the gmt binary target. Note: "make gmt" is then required
# before docs_depends [TRUE].
#set (GMT_DOCS_DEPEND_ON_GMT FALSE)

#
# Debugging
#

# Set build type can be: empty, Debug, Release, RelWithDebInfo or MinSizeRel
# [Release]:
#set (CMAKE_BUILD_TYPE Debug)

# Extra debugging for developers:
#add_definitions(-DDEBUG)
#add_definitions(-DMEMDEBUG) # Turn on memory tracking see gmt_support.c for extra info
set (CMAKE_C_FLAGS "-Wall -Wdeclaration-after-statement") # recommended even for release build
#set (CMAKE_C_FLAGS "-Wextra ${CMAKE_C_FLAGS}")            # extra warnings
#set (CMAKE_C_FLAGS_DEBUG -ggdb3)                          # gdb debugging symbols
#set (CMAKE_C_FLAGS_RELEASE "-ggdb3 -O2 -Wuninitialized")  # check uninitialized variables
#set (CMAKE_LINK_DEPENDS_DEBUG_MODE TRUE)                  # debug link dependencies

#
# System specific tweaks
#

# This is for GCC on Solaris to avoid "relocations remain against allocatable
# but non-writable sections" problems:
#set (USER_GMTLIB_LINK_FLAGS -mimpure-text)

# This may be needed to enable strdup and extended math functions with GCC and
# Suncc on Solaris:
#set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -D__EXTENSIONS__")

# Do not warn when building with Windows SDK or Visual Studio Express:
#set (CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_NO_WARNINGS ON)

# Manually select runtime library when compiling with Windows SDK or Visual
# Studio Express:
#set (CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS c:/Windows/System32/msvcr100.dll)

# If your NetCDF library is static (not recommended, applies to Windows only)
#set (NETCDF_STATIC TRUE)

# If want to rename the DLLs to something else than the default (e.g. to
# append the bitness - Windows only)
#if (WIN32)
# set (BITAGE 32)
# # Detect if we are building a 32 or 64 bits version
# if (CMAKE_SIZEOF_VOID_P EQUAL 8)
#   set (BITAGE 64)
# endif ()
# set (GMT_DLL_RENAME gmt_w${BITAGE})
# set (PSL_DLL_RENAME psl_w${BITAGE})
#endif(WIN32)

# On Windows Visual C 2012 needs _ALLOW_KEYWORD_MACROS to build
#if(MSVC11)
#  add_definitions(/D_ALLOW_KEYWORD_MACROS)
#endif(MSVC11)

# vim: textwidth=78 noexpandtab tabstop=2 softtabstop=2 shiftwidth=2