Re: Please some one write blog on gmt 5 installation

Thank you so much for your quick response, I got it ../ is previous
directory and where to define netcdf and hdf , gshhg and gcw ? can you send
me your cmake file(ConfigUser.cmake) I can use it as reference..

-Peter


On Sat, Feb 1, 2014 at 12:06 AM, Marcelo Banik <[email protected]>wrote:

> Hi Peter,
>
> Could not be the only problem, but the correct cmake command is:
>
> cmake -DCMAKE_INSTALL_PREFIX=/home/peter/software/gmt5 ..
>
> The ".." is very important here.
>
> Regards,
>
> Marcelo
>
>
>
> On Fri, Jan 31, 2014 at 4:26 PM, Peter <[email protected]> wrote:
>
>> Not working, Please someone help me... what I have to change in
>> ConfigUser.cmake ? where to set netcdf and hdf ? what I am doing wrong ?
>>
>> I tried as you said
>>
>> $ tar -xf gmt-5.1.0-src.tar.gz
>> $ cd gmt-5.1.0/
>> $ cd cmake/
>> $ cp ConfigUserTemplate.cmake ConfigUser.cmake
>> $ cd ..
>> $ mkdir build
>> $ cd build
>> $ cmake -DCMAKE_INSTALL_PREFIX=/home/peter/software/gmt5
>> CMake Error: The source directory "/home/peter/gmt-5.1.0/build" does not
>> appear to contain CMakeLists.txt.
>> Specify --help for usage, or press the help button on the CMake GUI.
>>
>> $ cat ConfigUser.cmake
>>
>> #
>> # $Id: ConfigUserTemplate.cmake 12425 2013-11-01 10:09:27Z fwobbe $
>> #
>> # Copyright (c) 1991-2013 by P. Wessel, W. H. F. Smith, R. Scharroo, J.
>> Luis and F. Wobbe
>> # See LICENSE.TXT file for copying and redistribution conditions.
>> #
>> # This program is free software; you can redistribute it and/or modify it
>> # under the terms of the GNU Lesser General Public License as published
>> by the
>> # Free Software Foundation; version 3 or any later version.
>> #
>> # This program is distributed in the hope that it will be useful, but
>> WITHOUT
>> # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> # FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General Public
>> License
>> # for more details.
>> #
>> # Contact info: gmt.soest.hawaii.edu
>>  #
>> ----------------------------------------------------------------------------
>>
>> # Use this file to override variables in 'ConfigDefault.cmake' on a
>> per-user
>> # basis.  First copy 'ConfigUserTemplate.cmake' to 'ConfigUser.cmake',
>> then
>> # edit 'ConfigUser.cmake'.  'ConfigUser.cmake' is not version controlled
>> # (currently listed in svn:ignore property)
>> #
>> # Note: CMake considers an empty string, "FALSE", "OFF", "NO", or any
>> string
>> # ending in "-NOTFOUND" to be false (this happens to be case-insensitive,
>> so
>> # "False", "off", "no", and "something-NotFound" are all false).  Other
>> values
>> # are true.  Thus it does not matter whether you use TRUE and FALSE, ON
>> and
>> # OFF, or YES and NO for your booleans.
>>
>> ##
>> ## Section 1: Installation paths
>> ##
>>
>> #
>> ============================================================================
>> # Basic setup begins here.  All settings are optional.  In most cases,
>> setting
>> # CMAKE_INSTALL_PREFIX should be all you need to do in order to build GMT
>> with
>> # reasonable defaults enabled.
>> #
>> ============================================================================
>>
>> # Installation path (usually defaults to /usr/local) [auto]:
>> set (CMAKE_INSTALL_PREFIX "/home/peter/software")
>>
>> # Set install name suffix used for directories and gmt executables
>>  # [undefined]:
>> set (GMT_INSTALL_NAME_SUFFIX "gmt5")
>>
>> # Install into traditional directory structure. Disable to install a
>> # distribution type directory structure (doc and share separated) [on]:
>> #set (GMT_INSTALL_TRADITIONAL_FOLDERNAMES OFF)
>>
>> # Install convenience links for GMT modules. Disable to install only the
>> main
>> # gmt program and access modules as "gmt modulename options" [TRUE]:
>> #set (GMT_INSTALL_MODULE_LINKS FALSE)
>>
>> #
>> ============================================================================
>> # Advanced configuration begins here.  Usually it is not necessary to
>> edit any
>> # settings below.  You should know what you are doing if you do though.
>>  Note:
>> # installation paths are relative to ${CMAKE_INSTALL_PREFIX} unless
>> absolute
>> # path is given.
>> #
>> ============================================================================
>>
>> # Set binary installation path [bin]:
>> #set (GMT_BINDIR "bin")
>>
>> # Set library installation path [lib or lib64]:
>> #set (GMT_LIBDIR "lib")
>>
>> # Set include installation path [include/gmt${GMT_INSTALL_NAME_SUFFIX}]:
>> #set (GMT_INCLUDEDIR "include/gmt")
>>
>> # Set share installation path [share or
>> share/gmt${GMT_INSTALL_NAME_SUFFIX}]:
>> #set (GMT_DATADIR "share/gmt")
>>
>> # Set doc installation path [share/doc or
>> # share/doc/gmt${GMT_INSTALL_NAME_SUFFIX}]:
>> #set (GMT_DOCDIR "share/doc/gmt")
>>
>> # Set manpage installation path [share/man or
>> # share/doc/gmt${GMT_INSTALL_NAME_SUFFIX}/man]:
>> #set (GMT_MANDIR "share/doc/gmt/man")
>>
>> # Install documentation files from this external location instead of
>> creating
>> # new PDF and HTML documents from scratch [${GMT_SOURCE_DIR}/doc_release]:
>> #set (GMT_INSTALL_EXTERNAL_DOC OFF)
>>
>> # Install manual pages from this external location instead of creating the
>> # manpages from scratch [${GMT_SOURCE_DIR}/man_release]:
>> #set (GMT_INSTALL_EXTERNAL_MAN OFF)
>>
>> ##
>> ## Section 2: Build dependencies (should only be needed if CMake cannot
>> ## automatically detect the rights version or path.)
>> ##
>>
>> # Set path to GSHHG Shoreline Database [auto]:
>> #set (GSHHG_ROOT "gshhg_path")
>>
>> # Copy GSHHG files to $/coast [FALSE]:
>> #set (COPY_GSHHG TRUE)
>>
>> # Set path to DCW Digital Chart of the World for GMT [auto]:
>> #set (DCW_ROOT "dcw-gmt_path")
>>
>> # Copy DCW files to $/dcw [FALSE]:
>> #set (COPY_DCW TRUE)
>>
>> # Set location of NetCDF (can be root directory, path to header file or
>> path
>> # to nc-config) [auto]:
>> #set (NETCDF_ROOT "netcdf_install_prefix")
>>
>> # Set location of GDAL (can be root directory, path to header file or
>> path to
>> # gdal-config) [auto]:
>> #set (GDAL_ROOT "gdal_install_prefix")
>>
>> # Set location of PCRE (can be root directory, path to header file or
>> path to
>> # pcre-config) [auto]:
>> #set (PCRE_ROOT "pcre_install_prefix")
>>
>> # Set location of single precision FFTW (can be root directory or path to
>> # header file) [auto]:
>> #set (FFTW3_ROOT "fftw_install_prefix")
>>
>> # Set location of ZLIB (can be root directory or path to header file)
>> [auto]:
>> #set (ZLIB_ROOT "zlib_install_prefix")
>>
>> ##
>> ## Section 3: GMT features
>> ##
>>
>> # Enforce GPL or LGPL conformity. Use this to disable routines that
>> cannot be
>> # redistributed under the terms of the GPL or LGPL such as Shewchuk's
>> # triangulation (valid values are GPL, LGPL and off) [off]:
>> #set (LICENSE_RESTRICTED GPL)
>>
>> # Configure default units (possible values are SI and US) [SI]:
>> #set (UNITS "US")
>>
>> # Enable file locking [FALSE]:
>> #set (FLOCK TRUE)
>>
>> # Enable building of shared libraries [TRUE] (disable to use static
>> libraries;
>> # not recommended):
>> #set (BUILD_SHARED_LIBS FALSE)
>>
>> # Build GMT shared lib with supplemental modules [TRUE]:
>> #set (BUILD_SUPPLEMENTS FALSE)
>>
>> ##
>> ## Section 4: Advanced tweaking
>> ##
>>
>> #
>> # Testing and development
>> #
>>
>> # Enable running examples/tests with "ctest" or "make check"
>> (out-of-source).
>> # Need to set either DO_EXAMPLES, DO_TESTS or both and uncomment the
>> following
>> # line.
>> #enable_testing()
>> #set (DO_EXAMPLES TRUE)
>> #set (DO_TESTS TRUE)
>> # Number of parallel test jobs with "make check":
>> #set (N_TEST_JOBS 4)
>>
>> # Enable this option to run GMT programs from within ${GMT_BINARY_DIR}
>> without
>> # installing or setting GMT_SHAREDIR and GMT_USERDIR first. This is
>> required
>> # for testing [OFF]:
>> #set (SUPPORT_EXEC_IN_BINARY_DIR ON)
>>
>> # List extra sub-dirs of 'src' with a CMakeList.txt to build non-module
>> codes
>> # that link against the full gmt libs (not just the API; for building
>> codes
>> # that only need the GMT API, see the gmtextension project).
>> #set (EXTRA_BUILD_DIRS apidemo)
>>
>> # Directory in which to install the release sources per default
>> # [${GMT_BINARY_DIR}/gmt-${GMT_PACKAGE_VERSION}]:
>> #set (GMT_RELEASE_PREFIX "release-src-prefix")
>>
>> # If set to false, image conversion from PS images to PNG and PDF does
>> # not depend on the gmt binary target. Note: "make gmt" is then required
>> # before docs_depends [TRUE].
>> #set (GMT_DOCS_DEPEND_ON_GMT FALSE)
>>
>> #
>> # Debugging
>> #
>>
>> # Set build type can be: empty, Debug, Release, RelWithDebInfo or
>> MinSizeRel
>> # [Release]:
>> #set (CMAKE_BUILD_TYPE Debug)
>>
>> # Extra debugging for developers:
>> #add_definitions(-DDEBUG)
>> #add_definitions(-DMEMDEBUG) # Turn on memory tracking see gmt_support.c
>> for extra info
>> #set (CMAKE_C_FLAGS "-Wall -Wdeclaration-after-statement") # recommended
>> even for release build
>> #set (CMAKE_C_FLAGS "-Wextra ${CMAKE_C_FLAGS}")            # extra
>> warnings
>> #set (CMAKE_C_FLAGS_DEBUG -ggdb3)                          # gdb
>> debugging symbols
>> #set (CMAKE_C_FLAGS_RELEASE "-ggdb3 -O2 -Wuninitialized")  # check
>> uninitialized variables
>> #set (CMAKE_LINK_DEPENDS_DEBUG_MODE TRUE)                  # debug link
>> dependencies
>>
>> #
>> # System specific tweaks
>> #
>>
>> # This is for GCC on Solaris to avoid "relocations remain against
>> allocatable
>> # but non-writable sections" problems:
>> #set (USER_GMTLIB_LINK_FLAGS -mimpure-text)
>>
>> # This may be needed to enable strdup and extended math functions with
>> GCC and
>> # Suncc on Solaris:
>> #set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -D__EXTENSIONS__")
>>
>> # Do not warn when building with Windows SDK or Visual Studio Express:
>> #set (CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_NO_WARNINGS ON)
>>
>> # Manually select runtime library when compiling with Windows SDK or
>> Visual
>> # Studio Express:
>> #set (CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS c:/Windows/System32/msvcr100.dll)
>>
>> # If your NetCDF library is static (not recommended, applies to Windows
>> only)
>> #set (NETCDF_STATIC TRUE)
>>
>> # If want to rename the DLLs to something else than the default (e.g. to
>> # append the bitness - Windows only)
>> #if (WIN32)
>> # set (BITAGE 32)
>> # # Detect if we are building a 32 or 64 bits version
>> # if (CMAKE_SIZEOF_VOID_P EQUAL 8)
>> #   set (BITAGE 64)
>> # endif ()
>> # set (GMT_DLL_RENAME gmt_w${BITAGE})
>> # set (PSL_DLL_RENAME psl_w${BITAGE})
>> #endif(WIN32)
>>
>> # On Windows Visual C 2012 needs _ALLOW_KEYWORD_MACROS to build
>> #if(MSVC11)
>> #  add_definitions(/D_ALLOW_KEYWORD_MACROS)
>> #endif(MSVC11)
>>
>> # vim: textwidth=78 noexpandtab tabstop=2 softtabstop=2 shiftwidth=2
>>
>> -Peter
>>
>>
>> On Fri, Jan 31, 2014 at 8:10 PM, Joaquim Luis <[email protected]> wrote:
>>
>>> No.
>>>
>>> GMT5 use cmake not autotools as the building system so this won't work.
>>>
>>>
>>>  then you commonly enter the created tree of directories searching for
>>>> a makefike. In this directory, you run:
>>>>
>>>> ./configure
>>>> ./make install
>>>>
>>>> normally you have also an INSTALL and README files in the same
>>>> directory.
>>>>
>>>> Finally you create some links and that's all. I don't now if this is
>>>> your case, but is the common way to do those thinks
>>>>
>>>> 2014/1/31, p Valdés<[email protected]>:
>>>>
>>>>> tar.gz file is an archive (a box with many archives) + compressed
>>>>> (gzip)
>>>>> file
>>>>>
>>>>> you need first to uncompress the file with: gunzip myfile.tar.gz
>>>>>
>>>>> then you need to move to your choice directory and open the package
>>>>> (now named myfile.tar) with
>>>>>
>>>>> tar -xvvf myfile.tar
>>>>>
>>>>> 2014/1/31, Peter<[email protected]>:
>>>>>
>>>>>> I have downloaded all the files shown in this page
>>>>>>
>>>>>> http://gmt.soest.hawaii.edu/projects/gmt/wiki/BuildingGMT
>>>>>> http://gmt.soest.hawaii.edu/projects/gmt/wiki/PackagingGMT
>>>>>>
>>>>>>
>>>>>> Really didn't understand please someone help
>>>>>>
>>>>>> How to install ? I don't want mixup with system library I want to
>>>>>> install
>>>>>> here
>>>>>>
>>>>>> /home/peter/software/gmt/gmt5
>>>>>>
>>>>>> I have these files in home directory
>>>>>>
>>>>>> gmt-5.1.0-src.tar.gz
>>>>>> gshhg-gmt-nc4-2.2.4.tar.gz
>>>>>> dcw-gmt-1.1.0.tar.gz
>>>>>>
>>>>>> netcdf_home=/home/peter/software/netcdf/netcdf_4_3
>>>>>> hdf_home=/home/peter/software/hdf/hdf5
>>>>>> cmake_home=/home/peter/software/cmake/bin
>>>>>>
>>>>>>
>>>>>>
>>>>>> Please someone kindly help me, I am not interested to use yum as it
>>>>>> installs old version
>>>>>>
>>>>>>
>>>>>> - Peter
>>>>>>
>>>>>> To unsubscribe, send the message "signoff gmt-help" to
>>>>>> [email protected]
>>>>>>
>>>>>>  To unsubscribe, send the message "signoff gmt-help" to
>>>> [email protected]
>>>>
>>>>
>>>>
>>> To unsubscribe, send the message "signoff gmt-help" to
>>> [email protected]
>>>
>>
>> To unsubscribe, send the message "signoff gmt-help" to
>> [email protected]
>>
>
> To unsubscribe, send the message "signoff gmt-help" to
> [email protected]
>

To unsubscribe, send the message "signoff gmt-help" to [email protected]