Re: Issues with gkrellm-uguru and gkrellm-hddtemp
Bill WIlson <[email protected]>
| Newsgroups | gmane.comp.gnome.apps.gkrellm |
|---|---|
| Message-ID | <[email protected]> |
On Sat, 5 Aug 2006 02:05:54 -0500 Bill WIlson <[email protected]> wrote: > > Thanks for the response. However, I'm not entirely clear on what you're saying. I have Hans' code installed (which I hadn't done yet when you responded) and get see the readings from the M/B in the files he creates in the "/sys" filesystem. Unfortunately sensors can't yet read that data. Are you implying that your plug-in is dependent on lm_senors? > > > > Regards, > > Steven > > The Linux kernel is changing where hardware monitoring data appears under /sys > and I have a patch for the next release that will let gkrellm see the new location. > If you are seeing readings under /sys/class/hwmon then that's what you would need. > I want to look over some things but then I can put up a test gkrellm tarball for > you to try by the end of the weekend if you want to try it? You can try this tarball: http://members.dslextreme.com/users/billw/test/gkrellm.tar.bz2 If anybody else tries it, there should be a good chance that your current sensors config will survive the upgrade, but you'll probably lose it if you then try to go back to your currently installed gkrellm. Cover yourself by saving a copy of your ~/.gkrellm2/sensor-config. Bill _______________________________________________ Gkrellm mailing list [email protected] http://lists.jutley.org/cgi-bin/mailman/listinfo/gkrellm