Re: Issues with gkrellm-uguru and gkrellm-hddtemp

Bill,

Finally got the chance last night to download this, build it, and give it a
try. Everything went smoothly, except I did lose my configuration when I
started the new version. Not a big problem to restore manually. I do wonder
what is supposed to be new with this version though. I could find no changes
in behavior.

Regards,
Steven


On 8/8/06, Bill WIlson <[email protected]> wrote:
>
> On Sat, 5 Aug 2006 02:05:54 -0500
> Bill WIlson <[email protected]> wrote:
>
> > >   Thanks for the response. However, I'm not entirely clear on what
> you're saying. I have Hans' code installed (which I hadn't done yet when you
> responded) and get see the readings from the M/B in the files he creates in
> the "/sys" filesystem. Unfortunately sensors can't yet read that data. Are
> you implying that your plug-in is dependent on lm_senors?
> > >
> > >   Regards,
> > >   Steven
> >
> > The Linux kernel is changing where hardware monitoring data appears
> under /sys
> > and I have a patch for the next release that will let gkrellm see the
> new location.
> > If you are seeing readings under /sys/class/hwmon then that's what you
> would need.
> > I want to look over some things but then I can put up a test gkrellm
> tarball for
> > you to try by the end of the weekend if you want to try it?
>
> You can try this tarball:
>
>    http://members.dslextreme.com/users/billw/test/gkrellm.tar.bz2
>
> If anybody else tries it, there should be a good chance that your current
> sensors config will survive the upgrade, but you'll probably lose it if
> you then
> try to go back to your currently installed gkrellm.  Cover yourself by
> saving a
> copy of your ~/.gkrellm2/sensor-config.
>
> Bill
> _______________________________________________
> Gkrellm mailing list
> [email protected]
> http://lists.jutley.org/cgi-bin/mailman/listinfo/gkrellm
>

_______________________________________________
Gkrellm mailing list
[email protected]
http://lists.jutley.org/cgi-bin/mailman/listinfo/gkrellm