Re: gkrellm only shows temp from one gpu

On Sunday, June 05, 2011, you wrote:
> Hi all,
> 
> I am running gkrellm 2.3.5 and Ubuntu 11.04.
> I have two GTX 460 cards in my machine which are recognized properly when I launch 
nvidia-settings, however with gkrellm (as well as gnome sensor-applet) only one of the 
cards is recognized. How can I get the temperature to show up for both cards?
> 
> below is the output from nvidia-smi -q -a:
> 
> ==============NVSMI LOG==============
> 
> Timestamp                       : Sun Jun  5 17:04:49 2011
> Driver Version                  : 270.41.06
> Attached GPUs                   : 2
> 
> GPU 0:3:0
>     Product Name                : GeForce GTX 460
>     Display Mode                : N/A
>     Persistence Mode            : Disabled
> Temperature
>         Gpu                     : 32 C
> 
> [...]
> 
> GPU 0:4:0
>     Product Name                : GeForce GTX 460
>     Display Mode                : N/A
>     Persistence Mode            : Disabled
>  Temperature
>         Gpu                     : 26 C
> 
> 
> 
> below is the output from gkrellm -d 0x80:
> 
> sensor_temp: core1 /sys/class/hwmon/hwmon1/device/temp1_input t=38.00
> sensor_temp: core2 /sys/class/hwmon/hwmon2/device/temp1_input t=34.00
> sensor_temp: core3 /sys/class/hwmon/hwmon3/device/temp1_input t=37.00
> sensor_temp: core4 /sys/class/hwmon/hwmon4/device/temp1_input t=32.00
> sensor_temp: hdd /dev/sda t=33.00
> sensor_temp: GPU:0 [gpu:0]/GPUCoreTemp t=32.00
> sensor_temp: GPU:1 [gpu:1]/GPUCoreTemp t=0.00
> 
> 
> 
> Thanks in advance,
> Phil

i am running gkrellm 2.3.4. in my builtins/sensors config i have nvidia gpu:x core 
selections but i also have nvidia-smi gpu:x selections... use the nvidia-smi selections 
and your temps will work. attached is a window shot of my config screen


-- 

Rio