Re: gkrellm only shows temp from one gpu

On Jun 5, 2011, at 8:32 PM, Rio wrote:

> On Sunday, June 05, 2011, you wrote:
>> Hi all,
>> 
>> I am running gkrellm 2.3.5 and Ubuntu 11.04.
>> I have two GTX 460 cards in my machine which are recognized properly when I launch 
> nvidia-settings, however with gkrellm (as well as gnome sensor-applet) only one of the 
> cards is recognized. How can I get the temperature to show up for both cards?
>> 
>> below is the output from nvidia-smi -q -a:
>> 
>> ==============NVSMI LOG==============
>> 
>> Timestamp                       : Sun Jun  5 17:04:49 2011
>> Driver Version                  : 270.41.06
>> Attached GPUs                   : 2
>> 
>> GPU 0:3:0
>>    Product Name                : GeForce GTX 460
>>    Display Mode                : N/A
>>    Persistence Mode            : Disabled
>> Temperature
>>        Gpu                     : 32 C
>> 
>> [...]
>> 
>> GPU 0:4:0
>>    Product Name                : GeForce GTX 460
>>    Display Mode                : N/A
>>    Persistence Mode            : Disabled
>> Temperature
>>        Gpu                     : 26 C
>> 
>> 
>> 
>> below is the output from gkrellm -d 0x80:
>> 
>> sensor_temp: core1 /sys/class/hwmon/hwmon1/device/temp1_input t=38.00
>> sensor_temp: core2 /sys/class/hwmon/hwmon2/device/temp1_input t=34.00
>> sensor_temp: core3 /sys/class/hwmon/hwmon3/device/temp1_input t=37.00
>> sensor_temp: core4 /sys/class/hwmon/hwmon4/device/temp1_input t=32.00
>> sensor_temp: hdd /dev/sda t=33.00
>> sensor_temp: GPU:0 [gpu:0]/GPUCoreTemp t=32.00
>> sensor_temp: GPU:1 [gpu:1]/GPUCoreTemp t=0.00
>> 
>> 
>> 
>> Thanks in advance,
>> Phil
> 
> i am running gkrellm 2.3.4. in my builtins/sensors config i have nvidia gpu:x core 
> selections but i also have nvidia-smi gpu:x selections... use the nvidia-smi selections 
> and your temps will work. attached is a window shot of my config screen
> 
> 
> -- 
> 
> Rio
> 

thanks for your quick reply. 
When I open the same config window I only see the "nvidia gpu:x core". The "nvidia-smi gpu:x core" option is not there. 

How can I get the nvidia-smi option to show up?

> 
> 
> ______________________________________________
> Gkrellm mailing list
> [email protected]
> Read archives-join-leave-set RSS feed:
> http://archive.lists.netservicesgroup.com
> This service is provided by The Network Services Group:
> http://www.netservicesgroup.com
> <gkrellShoot_06-05-11_203048.jpg>