Re: gkrellm only shows temp from one gpu

On Sunday, June 05, 2011, you wrote:
> 
> On Jun 5, 2011, at 8:32 PM, Rio wrote:
> 
> > On Sunday, June 05, 2011, you wrote:
> >> Hi all,
> >> 
> >> I am running gkrellm 2.3.5 and Ubuntu 11.04.
> >> I have two GTX 460 cards in my machine which are recognized properly when I launch 
> > nvidia-settings, however with gkrellm (as well as gnome sensor-applet) only one of the 
> > cards is recognized. How can I get the temperature to show up for both cards?
> >> 
> >> below is the output from nvidia-smi -q -a:
> >> 
> >> ==============NVSMI LOG==============
> >> 
> >> Timestamp                       : Sun Jun  5 17:04:49 2011
> >> Driver Version                  : 270.41.06
> >> Attached GPUs                   : 2
> >> 
> >> GPU 0:3:0
> >>    Product Name                : GeForce GTX 460
> >>    Display Mode                : N/A
> >>    Persistence Mode            : Disabled
> >> Temperature
> >>        Gpu                     : 32 C
> >> 
> >> [...]
> >> 
> >> GPU 0:4:0
> >>    Product Name                : GeForce GTX 460
> >>    Display Mode                : N/A
> >>    Persistence Mode            : Disabled
> >> Temperature
> >>        Gpu                     : 26 C
> >> 
> >> 
> >> 
> >> below is the output from gkrellm -d 0x80:
> >> 
> >> sensor_temp: core1 /sys/class/hwmon/hwmon1/device/temp1_input t=38.00
> >> sensor_temp: core2 /sys/class/hwmon/hwmon2/device/temp1_input t=34.00
> >> sensor_temp: core3 /sys/class/hwmon/hwmon3/device/temp1_input t=37.00
> >> sensor_temp: core4 /sys/class/hwmon/hwmon4/device/temp1_input t=32.00
> >> sensor_temp: hdd /dev/sda t=33.00
> >> sensor_temp: GPU:0 [gpu:0]/GPUCoreTemp t=32.00
> >> sensor_temp: GPU:1 [gpu:1]/GPUCoreTemp t=0.00
> >> 
> >> 
> >> 
> >> Thanks in advance,
> >> Phil
> > 
> > i am running gkrellm 2.3.4. in my builtins/sensors config i have nvidia gpu:x core 
> > selections but i also have nvidia-smi gpu:x selections... use the nvidia-smi 
selections 
> > and your temps will work. attached is a window shot of my config screen
> > 
> > 
> > -- 
> > 
> > Rio
> > 
> 
> thanks for your quick reply. 
> When I open the same config window I only see the "nvidia gpu:x core". The "nvidia-smi 
gpu:x core" option is not there. 
> 
> How can I get the nvidia-smi option to show up?
> 

in your ~/.gkrellm2 or maybe without the 2 directory if you run it as your user, or in 
/root/.gkrellm if you run it as root you should find a file called sensor-config
try adding these lines to it, changing your labels as you wish if they work.

put them right under the existing gpu lines

sensor "V285" "nvidia-smi GPU:0" 10000 0 1 0
sensor "V295a" "nvidia-smi GPU:1" 10000 0 1 0
sensor "V295b" "nvidia-smi GPU:2" 10000 0 1 0

that might do it.




> > 
> > 
> > ______________________________________________
> > Gkrellm mailing list
> > [email protected]
> > Read archives-join-leave-set RSS feed:
> > http://archive.lists.netservicesgroup.com
> > This service is provided by The Network Services Group:
> > http://www.netservicesgroup.com
> > <gkrellShoot_06-05-11_203048.jpg>
> 
> 


-- 

Rio


______________________________________________
Gkrellm mailing list
[email protected]
Read archives-join-leave-set RSS feed:
http://archive.lists.netservicesgroup.com
This service is provided by The Network Services Group:
http://www.netservicesgroup.com