Re: l10n/i18n issue in gvfs

Index: configure.ac
===================================================================
--- configure.ac	(revisione 1065)
+++ configure.ac	(copia locale)
@@ -52,21 +52,15 @@
 AC_SUBST(DBUS_SERVICE_DIR)
 
 dnl ****************************
-dnl *** Checks for gettext   ***
+dnl *** Checks for intltool   ***
 dnl ****************************
 
+AC_PROG_INTLTOOL([0.31.0])
 GETTEXT_PACKAGE=gvfs
-AC_DEFINE_UNQUOTED(GETTEXT_PACKAGE,"$GETTEXT_PACKAGE", [The gettext domain name])
-AC_SUBST(GETTEXT_PACKAGE)
-
-ALL_LINGUAS="it"
-
+AC_SUBST([GETTEXT_PACKAGE])
+AC_DEFINE_UNQUOTED([GETTEXT_PACKAGE],["$GETTEXT_PACKAGE"],[The gettext domain name])
 AM_GLIB_GNU_GETTEXT
 
-LIBS="$LIBS $INTLLIBS"
-
-AM_GLIB_DEFINE_LOCALEDIR(GVFS_LOCALEDIR)
-
 dnl ****************************
 dnl *** Checks for ssh stuff ***
 dnl ****************************
Index: hal/ghaldrive.c
===================================================================
--- hal/ghaldrive.c	(revisione 1065)
+++ hal/ghaldrive.c	(copia locale)
@@ -156,7 +156,7 @@
         second = _("DVD\xc2\xb1R");
       if (hal_device_get_property_bool (d, "storage.cdrom.dvdrw") &&
           hal_device_get_property_bool (d, "storage.cdrom.dvdplusrw"))
-        second = _("DVDxc2\xb1RW");
+        second = _("DVD\xc2\xb1RW");
       if (hal_device_get_property_bool (d, "storage.cdrom.hddvd"))
         second = _("HDDVD");
       if (hal_device_get_property_bool (d, "storage.cdrom.hddvdr"))
Index: autogen.sh
===================================================================
--- autogen.sh	(revisione 1065)
+++ autogen.sh	(copia locale)
@@ -29,6 +29,12 @@
 	DIE=1
 fi
 
+(intltoolize --version) < /dev/null > /dev/null 2>&1 || {
+    echo
+    echo "You must have intltool installed to compile gvfs."
+    DIE=1
+}
+
 (gtkdocize --version) < /dev/null > /dev/null 2>&1 || {
 	echo
 	echo "You must have gtk-doc installed to compile $PROJECT."
@@ -99,6 +105,7 @@
 touch README INSTALL
 
 libtoolize --force || exit $?
+intltoolize --force --copy --automake
 gtkdocize || exit $?
 
 $ACLOCAL $ACLOCAL_FLAGS || exit $?
Index: po/Makefile.in.in
===================================================================
--- po/Makefile.in.in	(revisione 1065)
+++ po/Makefile.in.in	(copia locale)
@@ -1,272 +0,0 @@
-# Makefile for program source directory in GNU NLS utilities package.
-# Copyright (C) 1995, 1996, 1997 by Ulrich Drepper <[email protected]>
-#
-# This file file be copied and used freely without restrictions.  It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
-#
-# - Modified by Owen Taylor <[email protected]> to use GETTEXT_PACKAGE
-#   instead of PACKAGE and to look for po2tbl in ./ not in intl/
-#
-# - Modified by jacob berkman <[email protected]> to install
-#   Makefile.in.in and po2tbl.sed.in for use with glib-gettextize
-
-GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
-PACKAGE = @PACKAGE@
-VERSION = @VERSION@
-
-SHELL = /bin/sh
-@SET_MAKE@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-datarootdir = @datarootdir@
-datadir = @datadir@
-libdir = @libdir@
-localedir = $(libdir)/locale
-gnulocaledir = $(datadir)/locale
-gettextsrcdir = $(datadir)/glib-2.0/gettext/po
-subdir = po
-
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-MKINSTALLDIRS = $(top_srcdir)/@MKINSTALLDIRS@
-
-CC = @CC@
-GENCAT = @GENCAT@
-GMSGFMT = @GMSGFMT@
-MSGFMT = @MSGFMT@
-MSGFMT_OPTS = @MSGFMT_OPTS@
-XGETTEXT = @XGETTEXT@
-MSGMERGE = msgmerge
-
-DEFS = @DEFS@
-CFLAGS = @CFLAGS@
-CPPFLAGS = @CPPFLAGS@
-
-INCLUDES = -I.. -I$(top_srcdir)/intl
-
-COMPILE = $(CC) -c $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS) $(XCFLAGS)
-
-SOURCES = 
-POFILES = @POFILES@
-GMOFILES = @GMOFILES@
-DISTFILES = ChangeLog Makefile.in.in POTFILES.in $(GETTEXT_PACKAGE).pot \
-$(POFILES) $(GMOFILES) $(SOURCES)
-
-POTFILES = \
-
-CATALOGS = @CATALOGS@
-CATOBJEXT = @CATOBJEXT@
-INSTOBJEXT = @INSTOBJEXT@
-
-.SUFFIXES:
-.SUFFIXES: .c .o .po .pox .gmo .mo .msg .cat
-
-.c.o:
-	$(COMPILE) $<
-
-.po.pox:
-	$(MAKE) $(GETTEXT_PACKAGE).pot
-	$(MSGMERGE) $< $(srcdir)/$(GETTEXT_PACKAGE).pot -o $*.pox
-
-.po.mo:
-	$(MSGFMT) -o $@ $<
-
-.po.gmo:
-	file=$(srcdir)/`echo $* | sed 's,.*/,,'`.gmo \
-	  && rm -f $$file && $(GMSGFMT) $(MSGFMT_OPTS) -o $$file $<
-
-.po.cat:
-	sed -f ../intl/po2msg.sed < $< > $*.msg \
-	  && rm -f $@ && $(GENCAT) $@ $*.msg
-
-
-all: all-@USE_NLS@
-
-all-yes: $(CATALOGS)
-all-no:
-
-$(srcdir)/$(GETTEXT_PACKAGE).pot: $(POTFILES)
-	$(XGETTEXT) --default-domain=$(GETTEXT_PACKAGE) --directory=$(top_srcdir) \
-	  --add-comments --keyword=_ --keyword=N_ \
-	  --from-code=UTF-8 \
-          --flag=g_strdup_printf:1:c-format \
-          --flag=g_string_printf:2:c-format \
-          --flag=g_string_append_printf:2:c-format \
-          --flag=g_error_new:3:c-format \
-          --flag=g_set_error:4:c-format \
-          --flag=g_markup_printf_escaped:1:c-format \
-          --flag=g_log:3:c-format \
-          --flag=g_print:1:c-format \
-          --flag=g_printerr:1:c-format \
-          --flag=g_printf:1:c-format \
-          --flag=g_fprintf:2:c-format \
-          --flag=g_sprintf:2:c-format \
-          --flag=g_snprintf:3:c-format \
-          --flag=g_scanner_error:2:c-format \
-          --flag=g_scanner_warn:2:c-format \
-	  --files-from=$(srcdir)/POTFILES.in \
-	&& test ! -f $(GETTEXT_PACKAGE).po \
-	   || ( rm -f $(srcdir)/$(GETTEXT_PACKAGE).pot \
-		&& mv $(GETTEXT_PACKAGE).po $(srcdir)/$(GETTEXT_PACKAGE).pot )
-
-install: install-exec install-data
-install-exec:
-install-data: install-data-@USE_NLS@
-install-data-no: all
-install-data-yes: all
-	if test -r "$(MKINSTALLDIRS)"; then \
-	  $(MKINSTALLDIRS) $(DESTDIR)$(datadir); \
-	else \
-	  $(SHELL) $(top_srcdir)/mkinstalldirs $(DESTDIR)$(datadir); \
-	fi
-	@catalogs='$(CATALOGS)'; \
-	for cat in $$catalogs; do \
-	  cat=`basename $$cat`; \
-	  case "$$cat" in \
-	    *.gmo) destdir=$(gnulocaledir);; \
-	    *)     destdir=$(localedir);; \
-	  esac; \
-	  lang=`echo $$cat | sed 's/\$(CATOBJEXT)$$//'`; \
-	  dir=$(DESTDIR)$$destdir/$$lang/LC_MESSAGES; \
-	  if test -r "$(MKINSTALLDIRS)"; then \
-	    $(MKINSTALLDIRS) $$dir; \
-	  else \
-	    $(SHELL) $(top_srcdir)/mkinstalldirs $$dir; \
-	  fi; \
-	  if test -r $$cat; then \
-	    $(INSTALL_DATA) $$cat $$dir/$(GETTEXT_PACKAGE)$(INSTOBJEXT); \
-	    echo "installing $$cat as $$dir/$(GETTEXT_PACKAGE)$(INSTOBJEXT)"; \
-	  else \
-	    $(INSTALL_DATA) $(srcdir)/$$cat $$dir/$(GETTEXT_PACKAGE)$(INSTOBJEXT); \
-	    echo "installing $(srcdir)/$$cat as" \
-		 "$$dir/$(GETTEXT_PACKAGE)$(INSTOBJEXT)"; \
-	  fi; \
-	  if test -r $$cat.m; then \
-	    $(INSTALL_DATA) $$cat.m $$dir/$(GETTEXT_PACKAGE)$(INSTOBJEXT).m; \
-	    echo "installing $$cat.m as $$dir/$(GETTEXT_PACKAGE)$(INSTOBJEXT).m"; \
-	  else \
-	    if test -r $(srcdir)/$$cat.m ; then \
-	      $(INSTALL_DATA) $(srcdir)/$$cat.m \
-		$$dir/$(GETTEXT_PACKAGE)$(INSTOBJEXT).m; \
-	      echo "installing $(srcdir)/$$cat as" \
-		   "$$dir/$(GETTEXT_PACKAGE)$(INSTOBJEXT).m"; \
-	    else \
-	      true; \
-	    fi; \
-	  fi; \
-	done
-	if test "$(PACKAGE)" = "glib"; then \
-	  if test -r "$(MKINSTALLDIRS)"; then \
-	    $(MKINSTALLDIRS) $(DESTDIR)$(gettextsrcdir); \
-	  else \
-	    $(SHELL) $(top_srcdir)/mkinstalldirs $(DESTDIR)$(gettextsrcdir); \
-	  fi; \
-	  $(INSTALL_DATA) $(srcdir)/Makefile.in.in \
-			  $(DESTDIR)$(gettextsrcdir)/Makefile.in.in; \
-	else \
-	  : ; \
-	fi
-
-# Define this as empty until I found a useful application.
-installcheck:
-
-uninstall:
-	catalogs='$(CATALOGS)'; \
-	for cat in $$catalogs; do \
-	  cat=`basename $$cat`; \
-	  lang=`echo $$cat | sed 's/\$(CATOBJEXT)$$//'`; \
-	  rm -f $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE)$(INSTOBJEXT); \
-	  rm -f $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE)$(INSTOBJEXT).m; \
-	  rm -f $(DESTDIR)$(gnulocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE)$(INSTOBJEXT); \
-	  rm -f $(DESTDIR)$(gnulocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE)$(INSTOBJEXT).m; \
-	done
-	if test "$(PACKAGE)" = "glib"; then \
-	  rm -f $(DESTDIR)$(gettextsrcdir)/Makefile.in.in; \
-	fi
-
-check: all
-
-dvi info tags TAGS ID:
-
-mostlyclean:
-	rm -f core core.* *.pox $(GETTEXT_PACKAGE).po *.old.po cat-id-tbl.tmp
-	rm -fr *.o
-
-clean: mostlyclean
-
-distclean: clean
-	rm -f Makefile Makefile.in POTFILES *.mo *.msg *.cat *.cat.m
-
-maintainer-clean: distclean
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-	rm -f $(GMOFILES)
-
-distdir = ../$(GETTEXT_PACKAGE)-$(VERSION)/$(subdir)
-dist distdir: update-po $(DISTFILES)
-	dists="$(DISTFILES)"; \
-	for file in $$dists; do \
-	  ln $(srcdir)/$$file $(distdir) 2> /dev/null \
-	    || cp -p $(srcdir)/$$file $(distdir); \
-	done
-
-update-po: Makefile
-	$(MAKE) $(GETTEXT_PACKAGE).pot
-	tmpdir=`pwd`; \
-	cd $(srcdir); \
-	catalogs='$(CATALOGS)'; \
-	for cat in $$catalogs; do \
-	  cat=`basename $$cat`; \
-	  lang=`echo $$cat | sed 's/\$(CATOBJEXT)$$//'`; \
-	  echo "$$lang:"; \
-	  if $(MSGMERGE) $$lang.po $(GETTEXT_PACKAGE).pot -o $$tmpdir/$$lang.new.po; then \
-	    if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
-	      rm -f $$tmpdir/$$lang.new.po; \
-            else \
-	      if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
-	        :; \
-	      else \
-	        echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
-	        rm -f $$tmpdir/$$lang.new.po; \
-	        exit 1; \
-	      fi; \
-	    fi; \
-	  else \
-	    echo "msgmerge for $$cat failed!"; \
-	    rm -f $$tmpdir/$$lang.new.po; \
-	  fi; \
-	done
-
-# POTFILES is created from POTFILES.in by stripping comments, empty lines
-# and Intltool tags (enclosed in square brackets), and appending a full
-# relative path to them
-POTFILES: POTFILES.in
-	( if test 'x$(srcdir)' != 'x.'; then \
-	    posrcprefix='$(top_srcdir)/'; \
-	  else \
-	    posrcprefix="../"; \
-	  fi; \
-	  rm -f $@-t $@ \
-	    && (sed -e '/^#/d' 						\
-		    -e "s/^\[.*\] +//" 					\
-		    -e '/^[ 	]*$$/d' 				\
-		    -e "s@.*@	$$posrcprefix& \\\\@" < $(srcdir)/[email protected]	\
-		| sed -e '$$s/\\$$//') > $@-t \
-	    && chmod a-w $@-t \
-	    && mv $@-t $@ )
-
-Makefile: Makefile.in.in ../config.status POTFILES
-	cd .. \
-	  && CONFIG_FILES=$(subdir)/[email protected] CONFIG_HEADERS= \
-	       $(SHELL) ./config.status
-
-# Tell versions [3.59,3.63) of GNU make not to export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT: