RE: PPPoE client authentication with GNU RADIUSserver

Here is the debig logs. Any help is appreciated as I have ran out of idea on 
what could go wrong here. Many thanks.

Auth.debug: auth.c:602:rad_check_password: auth_type=0, userpass=, 
name=user, password=123
Auth.debug: auth.c:648:rad_check_password:   auth: Local
Auth.notice: (Access-Request local 23 "user"): Login incorrect 
[user/{chap-password}]
Auth.debug: auth.c:1017:sfn_validate: 1 -> 15
Auth.debug: auth.c:1304:sfn_reject_cleanup: 15 -> 14
Auth.debug: auth.c:1310:sfn_reject: REJECT: user


>From: "Masood Ahmad Shah" <[email protected]>
>To: "'Tan hanyin'" <[email protected]>,<[email protected]>
>CC: <[email protected]>
>Subject: RE: [Help-gnu-radius] PPPoE client authentication with GNU 
>RADIUSserver
>Date: Tue, 13 Feb 2007 13:55:03 +0500
>
>Better if you can send debug logs as well...
>
>Regards,
>Masood Ahmad Shah
>http://www.weblogs.com.pk/jahil/
>
>
>-----Original Message-----
>From: [email protected]
>[mailto:[email protected]] On Behalf Of
>Tan hanyin
>Sent: Tuesday, February 13, 2007 1:47 PM
>To: [email protected]
>Cc: [email protected]
>Subject: Re: [Help-gnu-radius] PPPoE client authentication with GNU
>RADIUSserver
>
>
>Thanks for your reply.
>
>I've checked on all 3 points you pointed out. They are all in the right
>direction. The username and password match the one in the database, 
>password
>
>is stored in plaintext and Radiusd shared the same secret key as NAS.
>
>Not sure if this might help in troubleshooting, I got some reply in
>attribute from the NAS, from detail.auth file:
>
>   Service-Type = Framed-User
>     Framed-Protocol = PPP
>     User-Name = username
>     CHAP-Password =
>\263\120\247\231\117\044\365\375\063\327\324\331\332\362\073\241\357
>     NAS-IP-Address = 123.45.6.7
>     NAS-Port-Id = 0
>     CHAP-Challenge =
>\206\215\263\111\301\145\362\045\112\261\371\327\174\014X{
>     Timestamp = 1171354261
>     Request-Authenticator = None
>
>Hope to understand why i'm facing this problem and solve it. Many thanks.
>
> >From: "Sergey Poznyakoff" <[email protected]>
> >To: "Tan hanyin" <[email protected]>
> >CC: <[email protected]>
> >Subject: Re: [Help-gnu-radius] PPPoE client authentication with GNU 
>RADIUS
> >server
> >Date: Tue, 13 Feb 2007 10:20:55 +0200
> >
> >Tan hanyin <[email protected]> wrote:
> >
> > > Anyone has any idea what is the problem?
> >
> >Yes.  it is one of the following:
> >
> >1. The password used when logging in does not match the one stored in the
> >    database.
> >
> >2. The password is stored in the database in the encrypted form (must be
> >    plaintext).
> >
> >3. Radiusd and NAS use different shared secrets.
> >
> >Regards,
> >Sergey
>
>_________________________________________________________________
>Get your ringtones, operator logos and picture messages from MSN Mobile.
>http://msn.smsfactory.no/
>
>
>
>_______________________________________________
>Help-gnu-radius mailing list
>[email protected]
>http://lists.gnu.org/mailman/listinfo/help-gnu-radius
>

_________________________________________________________________
Get an advanced look at the new version of MSN Messenger. 
http://get.live.com/messenger/overview Try it now.