Re: sync problem with NR70V and jpilot / pilot-link
Andre Berger <[email protected]> Wed, 30 Apr 2003 10:57:05 -0400
| Newsgroups | gmane.comp.handhelds.clie.linux |
|---|---|
| Message-ID | <[email protected]> |
* Ty Unes <[email protected]>, 2003-04-30 10:52 -0400: > I don't know which distro you are using, I also don't know what clie > you have but I'm running a Redhat 8.0 box with a Sony Clie PEG-S360. I > use coldsync and J-pilot and all runs fine. My setup uses /dev/ttyUSB1 > instead of /dev/ttyUSB0 as the correct port. You may try this. Also, I > have my Serial Rate set at 115200. I'm not sure if the Serial Rate > makes a real difference or not. I thought /dev/ttyUSB0 at first as well! Let me add that upgrading jpilot might also help. I had the same problem with an m125, and it started working only after the upgrade. > Good Luck! > > RT... From me too -Andre
signature.asc
(application/pgp-signature, 189 B)
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (GNU/Linux) iD8DBQE+r+RBmlbrvn+0waMRApFjAJ0Zy4yWhqJTMs4ic6Xs9L7vf6G/mQCgufOo yu3Zup09GOtPdBRTh76N5lg= =PcGE -----END PGP SIGNATURE-----