Re: NR70V/E
Joe Foy <[email protected]> Thu, 1 May 2003 18:36:13 +0000
| Newsgroups | gmane.comp.handhelds.clie.linux |
|---|---|
| Message-ID | <[email protected]> |
This is what I get when I press the hotsync button Vigor14 kernel: hub.c: USB new device connect on bus1/2, assigned device number 4 Vigor14 kernel: usbserial.c: Sony Clié 4.x converter detected Vigor14 kernel: visor.c: Sony Clié 4.x: Number of ports: 2 Vigor14 kernel: visor.c: Sony Clié 4.x: port 1, is for Generic use and is bound to ttyUSB0 Vigor14 kernel: visor.c: Sony Clié 4.x: port 2, is for HotSync use and is bound to ttyUSB1 Vigor14 kernel: usbserial.c: Sony Clié 4.x converter now attached to ttyUSB0 (or usb/tts/0 for devfs) Vigor14 kernel: usbserial.c: Sony Clié 4.x converter now attached to ttyUSB1 (or usb/tts/1 for devfs) My Kernel seems to be 2.4.19 -- saved by the flying yellow monkeys _______________________________________________ clie-linux mailing list [email protected] http://kreucher.net/mailman/listinfo/clie-linux Sony Clié and Linux Homepage: http://kreucher.net/clie/