Help with Sony Clie PEG-SJ33/E

Hi. I am new to this list.

I hope you can help me. I have a Sony Clie PEG-SJ33/E and I am getting
the following weird kernel messages when I press the hotsync button on the
Clie. (below)

I cannot get pilot-link to work but I can mount the memory stick as
/dev/sdb1 

I am running SuSE 8.2 with kernel 2.4.20 and the
USB cable that came with the Clie and not a cradle. (do I need a cradle?)

I have /dev/pilot setup to /dev/ttyUSB1 also tried it linked to /dev/ttyUSB0 
and have read/write permissions on both. My old Handspring Visor works fine 
so I know it is not a problem with the general setup.

Any help would be great.

Thanks

James


May  1 18:55:35 baldrick kernel: hub.c: new USB device 00:1f.4-2,
assigned address 18
May  1 18:55:35 baldrick kernel: usbserial.c: Handspring Visor / Palm 4.0
/ Clié 4.x converter detected
May  1 18:55:35 baldrick kernel: visor.c: Handspring Visor / Palm 4.0 /
Clié 4.x: Number of ports: 2
May  1 18:55:35 baldrick kernel: visor.c: Handspring Visor / Palm 4.0 /
Clié 4.x: port 1, is for Generic use and is bound to ttyUSB0
May  1 18:55:35 baldrick kernel: visor.c: Handspring Visor / Palm 4.0 /
Clié 4.x: port 2, is for HotSync use and is bound to ttyUSB1
May  1 18:55:35 baldrick kernel: usbserial.c: Handspring Visor / Palm 4.0
/ Clié 4.x converter now attached to ttyUSB0 (or usb/tts/0 for devfs) May
1 18:55:35 baldrick kernel: usbserial.c: Handspring Visor / Palm 4.0 /
Clié 4.x converter now attached to ttyUSB1 (or usb/tts/1 for devfs) May 
1 18:55:39 baldrick kernel: Device not ready.  Make sure there is a disc
in the drive.
May  1 18:55:39 baldrick kernel: sda : READ CAPACITY failed.
May  1 18:55:39 baldrick kernel: sda : status = 1, message = 00, host =
0, driver = 08
May  1 18:55:39 baldrick kernel: Info fld=0xa00 (nonstd), Current
sd00:00: sns = 70  2
May  1 18:55:39 baldrick kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00
0x0a 0x00 0x00
May  1 18:55:39 baldrick kernel: sda : block size assumed to be 512
bytes, disk size 1GB.
May  1 18:55:39 baldrick kernel:  sda: I/O error: dev 08:00, sector 0
May  1 18:55:39 baldrick kernel: lost async page write due to I/O error
on 08:00
May  1 18:55:39 baldrick last message repeated 7 times
May  1 18:55:39 baldrick kernel:  I/O error: dev 08:00, sector 0
May  1 18:55:39 baldrick kernel: lost async page write due to I/O error
on 08:00
May  1 18:55:39 baldrick last message repeated 7 times
May  1 18:55:39 baldrick kernel:  I/O error: dev 08:00, sector 2097144
May  1 18:55:39 baldrick kernel: lost async page write due to I/O error
on 08:00
May  1 18:55:39 baldrick last message repeated 5 times
May  1 18:55:39 baldrick kernel:  I/O error: dev 08:00, sector 2097144
May  1 18:55:39 baldrick kernel: lost async page write due to I/O error
on 08:00
May  1 18:55:39 baldrick last message repeated 5 times
May  1 18:55:39 baldrick kernel:  I/O error: dev 08:00, sector 0
May  1 18:55:39 baldrick kernel: lost async page write due to I/O error
on 08:00
May  1 18:55:39 baldrick last message repeated 3 times
May  1 18:55:39 baldrick kernel:  I/O error: dev 08:00, sector 0
May  1 18:55:39 baldrick kernel: lost async page write due to I/O error
on 08:00
May  1 18:55:39 baldrick last message repeated 3 times
May  1 18:55:39 baldrick kernel:  unable to read partition table
May  1 18:55:39 baldrick kernel: Device not ready.  Make sure there is a
disc in the drive.
May  1 18:55:39 baldrick kernel:  I/O error: dev 08:00, sector 0
May  1 18:55:39 baldrick kernel: Device not ready.  Make sure there is a
disc in the drive.



-- 
[email protected]
www.mearsonline.co.uk

_______________________________________________
clie-linux mailing list
[email protected]
http://kreucher.net/mailman/listinfo/clie-linux

Sony Clié and Linux Homepage:
http://kreucher.net/clie/