Re: Syncing a SJ30
Robert Norris <[email protected]> Tue, 20 May 2003 12:55:09 +1000
| Newsgroups | gmane.comp.handhelds.clie.linux |
|---|---|
| Message-ID | <[email protected]> |
--qcHopEYAB45HaUaB Content-Type: multipart/mixed; boundary="VbJkn9YxBvnuCH5J" Content-Disposition: inline --VbJkn9YxBvnuCH5J Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable I wasn't sure if pilot-xfer would perform differently to coldsync, so I've attached logs of both. coldsync-usb-0: coldsync with /dev/ttyUSB0 coldsync-usb-1: coldsync with /dev/ttyUSB1 pilot-xfer-usb-0: pilot-xfer with /dev/ttyUSB0 pilot-xfer-usb-1: pilot-xfer with /dev/ttyUSB1 Each time I let things run until the Clie timed out the Hotsync operation. I had to Ctrl-C the sync program for each run except for coldsync and /dev/ttyUSB1, which failed immediately after startup with "Error: Can't connect to Palm." Thanks, Rob. --=20 Robert Norris GPG: 1024D/FC18E6C2 Email+Jabber: [email protected] Web: http://cataclysm.cx/ --VbJkn9YxBvnuCH5J Content-Type: text/plain; charset=unknown-8bit Content-Disposition: attachment; filename=coldsync-usb-0 Content-Transfer-Encoding: quoted-printable May 20 12:35:41 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: wakeup_hc May 20 12:35:42 gideon kernel: hub 1-0:0: port 2, status 101, change 1, 12 = Mb/s May 20 12:35:42 gideon kernel: hub 1-0:0: debounce: port 2: delay 100ms sta= ble 4 status 0x101 May 20 12:35:42 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: suspend_hc May 20 12:35:42 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: wakeup_hc May 20 12:35:42 gideon kernel: hub 1-0:0: new USB device on port 2, assigne= d address 7 May 20 12:35:42 gideon kernel: usb 1-2: new device strings: Mfr=3D1, Produc= t=3D2, SerialNumber=3D0 May 20 12:35:42 gideon kernel: usb 1-2: Product: Palm Handheld May 20 12:35:42 gideon kernel: usb 1-2: Manufacturer: Palm, Inc. May 20 12:35:42 gideon kernel: drivers/usb/core/usb.c: usb_hotplug May 20 12:35:42 gideon kernel: usb 1-2: usb_new_device - registering interf= ace 1-2:0 May 20 12:35:42 gideon kernel: drivers/usb/core/usb.c: usb_hotplug May 20 12:35:42 gideon kernel: visor 1-2:0: usb_device_probe May 20 12:35:42 gideon kernel: visor 1-2:0: usb_device_probe - got id May 20 12:35:42 gideon kernel: drivers/usb/serial/visor.c: visor_probe May 20 12:35:42 gideon kernel: drivers/usb/serial/visor.c: visor_probe - Se= t config to 1 May 20 12:35:42 gideon kernel: drivers/usb/serial/visor.c: palm_os_4_probe May 20 12:35:42 gideon kernel: usb 1-2: palm_os_4_probe - error -32 getting= connection info May 20 12:35:42 gideon kernel: visor 1-2:0: Handspring Visor / Treo / Palm = 4.0 / Cli=E9 4.x converter detected May 20 12:35:42 gideon kernel: usb 1-2: Handspring Visor / Treo / Palm 4.0 = / Cli=E9 4.x converter now attached to ttyUSB0 (or usb/tts/0 for devfs) May 20 12:35:42 gideon kernel: usb 1-2: Handspring Visor / Treo / Palm 4.0 = / Cli=E9 4.x converter now attached to ttyUSB1 (or usb/tts/1 for devfs) May 20 12:35:43 gideon kernel: drivers/usb/serial/visor.c: visor_open - por= t 0 May 20 12:35:43 gideon kernel: drivers/usb/serial/visor.c: visor_ioctl - po= rt 0, cmd 0x5401 May 20 12:35:43 gideon kernel: drivers/usb/serial/visor.c: visor_ioctl - po= rt 0, cmd 0x5402 May 20 12:35:43 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - port 0 May 20 12:35:43 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - data bits =3D 8 May 20 12:35:43 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - parity =3D none May 20 12:35:43 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - stop bits =3D 1 May 20 12:35:43 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - RTS/CTS is disabled May 20 12:35:43 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - XON/XOFF is disabled May 20 12:35:43 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - baud rate =3D 230400 May 20 12:35:43 gideon kernel: drivers/usb/serial/visor.c: visor_ioctl - po= rt 0, cmd 0x5401 May 20 12:35:43 gideon kernel: drivers/usb/serial/visor.c: visor_ioctl - po= rt 0, cmd 0x5401 May 20 12:35:43 gideon kernel: drivers/usb/serial/visor.c: visor_ioctl - po= rt 0, cmd 0x5402 May 20 12:35:43 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - port 0 May 20 12:35:43 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - data bits =3D 8 May 20 12:35:43 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - parity =3D none May 20 12:35:43 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - stop bits =3D 1 May 20 12:35:43 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - RTS/CTS is disabled May 20 12:35:43 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - XON/XOFF is disabled May 20 12:35:43 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - baud rate =3D 9600 May 20 12:35:43 gideon kernel: drivers/usb/serial/visor.c: visor_ioctl - po= rt 0, cmd 0x5401 May 20 12:35:43 gideon kernel: drivers/usb/serial/visor.c: visor_chars_in_b= uffer - port 0 May 20 12:35:43 gideon kernel: drivers/usb/serial/visor.c: visor_chars_in_b= uffer - port 0 May 20 12:35:43 gideon kernel: drivers/usb/serial/visor.c: visor_chars_in_b= uffer - port 0 May 20 12:36:42 gideon kernel: drivers/usb/host/uhci-hcd.c: uhci_result_com= mon() failed with status 440000 May 20 12:36:42 gideon kernel: [cf913240] link (0f913212) element (0f912030) May 20 12:36:42 gideon kernel: 0: [cf912030] link (00000001) e0 SPD IOC S= talled CRC/Timeo Length=3D7ff MaxLen=3Df DT0 EndPt=3D1 Dev=3D7, PID=3D69(IN= ) (buf=3D0f8b4740) May 20 12:36:42 gideon kernel:=20 May 20 12:36:42 gideon kernel: drivers/usb/serial/visor.c: visor_read_bulk_= callback - port 0 May 20 12:36:42 gideon kernel: drivers/usb/serial/visor.c: visor_read_bulk_= callback - nonzero read bulk status received: -84 May 20 12:36:42 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: suspend_hc May 20 12:36:42 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: wakeup_hc May 20 12:36:42 gideon kernel: hub 1-0:0: port 2, status 100, change 3, 12 = Mb/s May 20 12:36:42 gideon kernel: usb 1-2: USB disconnect, address 7 May 20 12:36:42 gideon kernel: usb 1-2: unregistering interfaces May 20 12:36:42 gideon kernel: visor 1-2:0: device disconnected May 20 12:36:42 gideon kernel: drivers/usb/core/usb.c: usb_hotplug May 20 12:36:42 gideon kernel: usb 1-2: unregistering device May 20 12:36:42 gideon kernel: drivers/usb/core/usb.c: usb_hotplug May 20 12:36:42 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: suspend_hc May 20 12:36:42 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: wakeup_hc May 20 12:36:42 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: suspend_hc May 20 12:36:42 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: wakeup_hc May 20 12:36:43 gideon kernel: hub 1-0:0: port 2 enable change, status 100 May 20 12:36:43 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: suspend_hc May 20 12:36:43 gideon kernel: drivers/usb/serial/visor.c: visor_chars_in_b= uffer - port 0 May 20 12:36:43 gideon kernel: drivers/usb/serial/visor.c: visor_chars_in_b= uffer - port 0 May 20 12:36:43 gideon kernel: drivers/usb/serial/visor.c: visor_chars_in_b= uffer - port 0 May 20 12:36:56 gideon kernel: drivers/usb/serial/visor.c: visor_close - po= rt 0 May 20 12:36:56 gideon kernel: drivers/usb/serial/visor.c: visor_shutdown May 20 12:36:56 gideon kernel: visor ttyUSB0: Handspring Visor / Treo / Pal= m 4.0 / Cli=E9 4.x converter now disconnected from ttyUSB0 May 20 12:36:56 gideon kernel: visor ttyUSB1: Handspring Visor / Treo / Pal= m 4.0 / Cli=E9 4.x converter now disconnected from ttyUSB1 --VbJkn9YxBvnuCH5J Content-Type: text/plain; charset=unknown-8bit Content-Disposition: attachment; filename=coldsync-usb-1 Content-Transfer-Encoding: quoted-printable May 20 12:40:40 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: wakeup_hc May 20 12:40:40 gideon kernel: hub 1-0:0: port 2, status 101, change 1, 12 = Mb/s May 20 12:40:40 gideon kernel: hub 1-0:0: debounce: port 2: delay 100ms sta= ble 4 status 0x101 May 20 12:40:40 gideon kernel: hub 1-0:0: new USB device on port 2, assigne= d address 8 May 20 12:40:40 gideon kernel: usb 1-2: new device strings: Mfr=3D1, Produc= t=3D2, SerialNumber=3D0 May 20 12:40:40 gideon kernel: usb 1-2: Product: Palm Handheld May 20 12:40:40 gideon kernel: usb 1-2: Manufacturer: Palm, Inc. May 20 12:40:40 gideon kernel: drivers/usb/core/usb.c: usb_hotplug May 20 12:40:40 gideon kernel: usb 1-2: usb_new_device - registering interf= ace 1-2:0 May 20 12:40:40 gideon kernel: drivers/usb/core/usb.c: usb_hotplug May 20 12:40:40 gideon kernel: visor 1-2:0: usb_device_probe May 20 12:40:40 gideon kernel: visor 1-2:0: usb_device_probe - got id May 20 12:40:40 gideon kernel: drivers/usb/serial/visor.c: visor_probe May 20 12:40:40 gideon kernel: drivers/usb/serial/visor.c: visor_probe - Se= t config to 1 May 20 12:40:40 gideon kernel: drivers/usb/serial/visor.c: palm_os_4_probe May 20 12:40:40 gideon kernel: usb 1-2: palm_os_4_probe - error -32 getting= connection info May 20 12:40:40 gideon kernel: visor 1-2:0: Handspring Visor / Treo / Palm = 4.0 / Cli=E9 4.x converter detected May 20 12:40:40 gideon kernel: usb 1-2: Handspring Visor / Treo / Palm 4.0 = / Cli=E9 4.x converter now attached to ttyUSB0 (or usb/tts/0 for devfs) May 20 12:40:40 gideon kernel: usb 1-2: Handspring Visor / Treo / Palm 4.0 = / Cli=E9 4.x converter now attached to ttyUSB1 (or usb/tts/1 for devfs) May 20 12:40:42 gideon kernel: drivers/usb/serial/visor.c: visor_open - por= t 1 May 20 12:40:42 gideon kernel: drivers/usb/serial/visor.c: visor_ioctl - po= rt 1, cmd 0x5401 May 20 12:40:42 gideon kernel: drivers/usb/serial/visor.c: visor_ioctl - po= rt 1, cmd 0x5402 May 20 12:40:42 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - port 1 May 20 12:40:42 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - data bits =3D 8 May 20 12:40:42 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - parity =3D none May 20 12:40:42 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - stop bits =3D 1 May 20 12:40:42 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - RTS/CTS is disabled May 20 12:40:42 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - XON/XOFF is disabled May 20 12:40:42 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - baud rate =3D 230400 May 20 12:40:42 gideon kernel: drivers/usb/serial/visor.c: visor_ioctl - po= rt 1, cmd 0x5401 May 20 12:40:42 gideon kernel: drivers/usb/serial/visor.c: visor_ioctl - po= rt 1, cmd 0x5401 May 20 12:40:42 gideon kernel: drivers/usb/serial/visor.c: visor_ioctl - po= rt 1, cmd 0x5402 May 20 12:40:42 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - port 1 May 20 12:40:42 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - data bits =3D 8 May 20 12:40:42 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - parity =3D none May 20 12:40:42 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - stop bits =3D 1 May 20 12:40:42 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - RTS/CTS is disabled May 20 12:40:42 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - XON/XOFF is disabled May 20 12:40:42 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - baud rate =3D 9600 May 20 12:40:42 gideon kernel: drivers/usb/serial/visor.c: visor_ioctl - po= rt 1, cmd 0x5401 May 20 12:40:42 gideon kernel: drivers/usb/serial/visor.c: visor_chars_in_b= uffer - port 1 May 20 12:40:42 gideon kernel: drivers/usb/serial/visor.c: visor_chars_in_b= uffer - port 1 May 20 12:40:42 gideon kernel: drivers/usb/serial/visor.c: visor_chars_in_b= uffer - port 1 May 20 12:40:44 gideon kernel: drivers/usb/serial/visor.c: visor_close - po= rt 1 May 20 12:40:44 gideon kernel: drivers/usb/serial/visor.c: visor_read_bulk_= callback - port 1 May 20 12:40:44 gideon kernel: drivers/usb/serial/visor.c: visor_read_bulk_= callback - nonzero read bulk status received: -104 May 20 12:41:41 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: suspend_hc May 20 12:41:41 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: wakeup_hc May 20 12:41:41 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: suspend_hc May 20 12:41:41 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: wakeup_hc May 20 12:41:41 gideon kernel: hub 1-0:0: port 2, status 100, change 3, 12 = Mb/s May 20 12:41:41 gideon kernel: usb 1-2: USB disconnect, address 8 May 20 12:41:41 gideon kernel: usb 1-2: unregistering interfaces May 20 12:41:41 gideon kernel: drivers/usb/serial/visor.c: visor_shutdown May 20 12:41:41 gideon kernel: visor ttyUSB0: Handspring Visor / Treo / Pal= m 4.0 / Cli=E9 4.x converter now disconnected from ttyUSB0 May 20 12:41:41 gideon kernel: visor ttyUSB1: Handspring Visor / Treo / Pal= m 4.0 / Cli=E9 4.x converter now disconnected from ttyUSB1 May 20 12:41:41 gideon kernel: usb 1-2: hcd_unlink_urb ce55f8a0 fail -22 May 20 12:41:41 gideon kernel: usb 1-2: hcd_unlink_urb ce55f840 fail -22 May 20 12:41:41 gideon kernel: usb 1-2: hcd_unlink_urb ce55f7e0 fail -22 May 20 12:41:41 gideon kernel: usb 1-2: hcd_unlink_urb ce55f780 fail -22 May 20 12:41:41 gideon kernel: visor 1-2:0: device disconnected May 20 12:41:41 gideon kernel: drivers/usb/core/usb.c: usb_hotplug May 20 12:41:41 gideon kernel: usb 1-2: unregistering device May 20 12:41:41 gideon kernel: drivers/usb/core/usb.c: usb_hotplug May 20 12:41:41 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: suspend_hc May 20 12:41:41 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: wakeup_hc May 20 12:41:41 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: suspend_hc May 20 12:41:41 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: wakeup_hc May 20 12:41:41 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: suspend_hc May 20 12:41:41 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: wakeup_hc May 20 12:41:41 gideon kernel: hub 1-0:0: port 2 enable change, status 100 May 20 12:41:41 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: suspend_hc --VbJkn9YxBvnuCH5J Content-Type: text/plain; charset=unknown-8bit Content-Disposition: attachment; filename=pilot-link-usb-0 Content-Transfer-Encoding: quoted-printable May 20 12:47:56 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: wakeup_hc May 20 12:47:56 gideon kernel: hub 1-0:0: port 2, status 101, change 1, 12 = Mb/s May 20 12:47:56 gideon kernel: hub 1-0:0: debounce: port 2: delay 100ms sta= ble 4 status 0x101 May 20 12:47:56 gideon kernel: hub 1-0:0: new USB device on port 2, assigne= d address 14 May 20 12:47:56 gideon kernel: usb 1-2: new device strings: Mfr=3D1, Produc= t=3D2, SerialNumber=3D0 May 20 12:47:56 gideon kernel: usb 1-2: Product: Palm Handheld May 20 12:47:56 gideon kernel: usb 1-2: Manufacturer: Palm, Inc. May 20 12:47:56 gideon kernel: drivers/usb/core/usb.c: usb_hotplug May 20 12:47:56 gideon kernel: usb 1-2: usb_new_device - registering interf= ace 1-2:0 May 20 12:47:56 gideon kernel: drivers/usb/core/usb.c: usb_hotplug May 20 12:47:56 gideon kernel: visor 1-2:0: usb_device_probe May 20 12:47:56 gideon kernel: visor 1-2:0: usb_device_probe - got id May 20 12:47:56 gideon kernel: drivers/usb/serial/visor.c: visor_probe May 20 12:47:56 gideon kernel: drivers/usb/serial/visor.c: visor_probe - Se= t config to 1 May 20 12:47:56 gideon kernel: drivers/usb/serial/visor.c: palm_os_4_probe May 20 12:47:56 gideon kernel: usb 1-2: palm_os_4_probe - error -32 getting= connection info May 20 12:47:56 gideon kernel: visor 1-2:0: Handspring Visor / Treo / Palm = 4.0 / Cli=E9 4.x converter detected May 20 12:47:56 gideon kernel: usb 1-2: Handspring Visor / Treo / Palm 4.0 = / Cli=E9 4.x converter now attached to ttyUSB0 (or usb/tts/0 for devfs) May 20 12:47:56 gideon kernel: usb 1-2: Handspring Visor / Treo / Palm 4.0 = / Cli=E9 4.x converter now attached to ttyUSB1 (or usb/tts/1 for devfs) May 20 12:47:58 gideon kernel: drivers/usb/serial/visor.c: visor_open - por= t 0 May 20 12:47:58 gideon kernel: drivers/usb/serial/visor.c: visor_ioctl - po= rt 0, cmd 0x5401 May 20 12:47:58 gideon kernel: drivers/usb/serial/visor.c: visor_ioctl - po= rt 0, cmd 0x5401 May 20 12:47:58 gideon kernel: drivers/usb/serial/visor.c: visor_ioctl - po= rt 0, cmd 0x5402 May 20 12:47:58 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - port 0 May 20 12:47:58 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - nothing to change... May 20 12:47:58 gideon kernel: drivers/usb/serial/visor.c: visor_ioctl - po= rt 0, cmd 0x5401 May 20 12:47:58 gideon kernel: drivers/usb/serial/visor.c: visor_ioctl - po= rt 0, cmd 0x5401 May 20 12:47:58 gideon kernel: drivers/usb/serial/visor.c: visor_ioctl - po= rt 0, cmd 0x5403 May 20 12:47:58 gideon kernel: drivers/usb/serial/visor.c: visor_chars_in_b= uffer - port 0 May 20 12:47:58 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - port 0 May 20 12:47:58 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - nothing to change... May 20 12:47:58 gideon kernel: drivers/usb/serial/visor.c: visor_chars_in_b= uffer - port 0 May 20 12:48:57 gideon kernel: drivers/usb/host/uhci-hcd.c: uhci_result_com= mon() failed with status 440000 May 20 12:48:57 gideon kernel: [cf913240] link (0f913212) element (0f912030) May 20 12:48:57 gideon kernel: 0: [cf912030] link (00000001) e0 SPD IOC S= talled CRC/Timeo Length=3D7ff MaxLen=3Df DT0 EndPt=3D1 Dev=3De, PID=3D69(IN= ) (buf=3D0e1d9d40) May 20 12:48:57 gideon kernel:=20 May 20 12:48:57 gideon kernel: drivers/usb/serial/visor.c: visor_read_bulk_= callback - port 0 May 20 12:48:57 gideon kernel: drivers/usb/serial/visor.c: visor_read_bulk_= callback - nonzero read bulk status received: -84 May 20 12:48:57 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: suspend_hc May 20 12:48:57 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: wakeup_hc May 20 12:48:57 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: suspend_hc May 20 12:48:57 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: wakeup_hc May 20 12:48:57 gideon kernel: hub 1-0:0: port 2, status 100, change 3, 12 = Mb/s May 20 12:48:57 gideon kernel: usb 1-2: USB disconnect, address 14 May 20 12:48:57 gideon kernel: usb 1-2: unregistering interfaces May 20 12:48:57 gideon kernel: visor 1-2:0: device disconnected May 20 12:48:57 gideon kernel: drivers/usb/core/usb.c: usb_hotplug May 20 12:48:57 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: suspend_hc May 20 12:48:57 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: wakeup_hc May 20 12:48:57 gideon kernel: usb 1-2: unregistering device May 20 12:48:57 gideon kernel: drivers/usb/core/usb.c: usb_hotplug May 20 12:48:57 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: suspend_hc May 20 12:48:57 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: wakeup_hc May 20 12:48:57 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: suspend_hc May 20 12:48:57 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: wakeup_hc May 20 12:48:57 gideon kernel: hub 1-0:0: port 2 enable change, status 100 May 20 12:48:57 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: suspend_hc May 20 12:49:17 gideon kernel: drivers/usb/serial/visor.c: visor_chars_in_b= uffer - port 0 May 20 12:49:17 gideon kernel: drivers/usb/serial/visor.c: visor_close - po= rt 0 May 20 12:49:17 gideon kernel: drivers/usb/serial/visor.c: visor_shutdown May 20 12:49:17 gideon kernel: visor ttyUSB0: Handspring Visor / Treo / Pal= m 4.0 / Cli=E9 4.x converter now disconnected from ttyUSB0 May 20 12:49:17 gideon kernel: visor ttyUSB1: Handspring Visor / Treo / Pal= m 4.0 / Cli=E9 4.x converter now disconnected from ttyUSB1 --VbJkn9YxBvnuCH5J Content-Type: text/plain; charset=unknown-8bit Content-Disposition: attachment; filename=pilot-link-usb-1 Content-Transfer-Encoding: quoted-printable May 20 12:45:12 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: wakeup_hc May 20 12:45:12 gideon kernel: hub 1-0:0: port 2, status 101, change 1, 12 = Mb/s May 20 12:45:12 gideon kernel: hub 1-0:0: debounce: port 2: delay 100ms sta= ble 4 status 0x101 May 20 12:45:12 gideon kernel: hub 1-0:0: new USB device on port 2, assigne= d address 10 May 20 12:45:12 gideon kernel: usb 1-2: new device strings: Mfr=3D1, Produc= t=3D2, SerialNumber=3D0 May 20 12:45:12 gideon kernel: usb 1-2: Product: Palm Handheld May 20 12:45:12 gideon kernel: usb 1-2: Manufacturer: Palm, Inc. May 20 12:45:12 gideon kernel: drivers/usb/core/usb.c: usb_hotplug May 20 12:45:12 gideon kernel: usb 1-2: usb_new_device - registering interf= ace 1-2:0 May 20 12:45:12 gideon kernel: drivers/usb/core/usb.c: usb_hotplug May 20 12:45:12 gideon kernel: visor 1-2:0: usb_device_probe May 20 12:45:12 gideon kernel: visor 1-2:0: usb_device_probe - got id May 20 12:45:12 gideon kernel: drivers/usb/serial/visor.c: visor_probe May 20 12:45:12 gideon kernel: drivers/usb/serial/visor.c: visor_probe - Se= t config to 1 May 20 12:45:12 gideon kernel: drivers/usb/serial/visor.c: palm_os_4_probe May 20 12:45:12 gideon kernel: usb 1-2: palm_os_4_probe - error -32 getting= connection info May 20 12:45:12 gideon kernel: visor 1-2:0: Handspring Visor / Treo / Palm = 4.0 / Cli=E9 4.x converter detected May 20 12:45:12 gideon kernel: usb 1-2: Handspring Visor / Treo / Palm 4.0 = / Cli=E9 4.x converter now attached to ttyUSB0 (or usb/tts/0 for devfs) May 20 12:45:12 gideon kernel: usb 1-2: Handspring Visor / Treo / Palm 4.0 = / Cli=E9 4.x converter now attached to ttyUSB1 (or usb/tts/1 for devfs) May 20 12:45:15 gideon kernel: drivers/usb/serial/visor.c: visor_open - por= t 1 May 20 12:45:15 gideon kernel: drivers/usb/serial/visor.c: visor_ioctl - po= rt 1, cmd 0x5401 May 20 12:45:15 gideon kernel: drivers/usb/serial/visor.c: visor_ioctl - po= rt 1, cmd 0x5401 May 20 12:45:15 gideon kernel: drivers/usb/serial/visor.c: visor_ioctl - po= rt 1, cmd 0x5402 May 20 12:45:15 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - port 1 May 20 12:45:15 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - data bits =3D 8 May 20 12:45:15 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - parity =3D none May 20 12:45:15 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - stop bits =3D 1 May 20 12:45:15 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - RTS/CTS is disabled May 20 12:45:15 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - XON/XOFF is disabled May 20 12:45:15 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - baud rate =3D 9600 May 20 12:45:15 gideon kernel: drivers/usb/serial/visor.c: visor_ioctl - po= rt 1, cmd 0x5401 May 20 12:45:15 gideon kernel: drivers/usb/serial/visor.c: visor_ioctl - po= rt 1, cmd 0x5401 May 20 12:45:15 gideon kernel: drivers/usb/serial/visor.c: visor_ioctl - po= rt 1, cmd 0x5403 May 20 12:45:15 gideon kernel: drivers/usb/serial/visor.c: visor_chars_in_b= uffer - port 1 May 20 12:45:15 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - port 1 May 20 12:45:15 gideon kernel: drivers/usb/serial/visor.c: visor_set_termio= s - nothing to change... May 20 12:45:15 gideon kernel: drivers/usb/serial/visor.c: visor_chars_in_b= uffer - port 1 May 20 12:46:13 gideon kernel: drivers/usb/host/uhci-hcd.c: uhci_result_com= mon() failed with status 440000 May 20 12:46:13 gideon kernel: [cf913240] link (0f913212) element (0f912030) May 20 12:46:13 gideon kernel: 0: [cf912030] link (00000001) e0 SPD IOC S= talled CRC/Timeo Length=3D7ff MaxLen=3D3f DT0 EndPt=3D2 Dev=3Da, PID=3D69(I= N) (buf=3D0f802660) May 20 12:46:13 gideon kernel:=20 May 20 12:46:13 gideon kernel: drivers/usb/serial/visor.c: visor_read_bulk_= callback - port 1 May 20 12:46:13 gideon kernel: drivers/usb/serial/visor.c: visor_read_bulk_= callback - nonzero read bulk status received: -84 May 20 12:46:13 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: suspend_hc May 20 12:46:13 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: wakeup_hc May 20 12:46:13 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: suspend_hc May 20 12:46:13 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: wakeup_hc May 20 12:46:13 gideon kernel: hub 1-0:0: port 2, status 100, change 3, 12 = Mb/s May 20 12:46:13 gideon kernel: usb 1-2: USB disconnect, address 10 May 20 12:46:13 gideon kernel: usb 1-2: unregistering interfaces May 20 12:46:13 gideon kernel: visor 1-2:0: device disconnected May 20 12:46:13 gideon kernel: drivers/usb/core/usb.c: usb_hotplug May 20 12:46:13 gideon kernel: usb 1-2: unregistering device May 20 12:46:13 gideon kernel: drivers/usb/core/usb.c: usb_hotplug May 20 12:46:13 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: suspend_hc May 20 12:46:13 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: wakeup_hc May 20 12:46:13 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: suspend_hc May 20 12:46:13 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: wakeup_hc May 20 12:46:13 gideon kernel: hub 1-0:0: port 2 enable change, status 100 May 20 12:46:13 gideon kernel: drivers/usb/host/uhci-hcd.c: 1060: suspend_hc May 20 12:46:36 gideon kernel: drivers/usb/serial/visor.c: visor_chars_in_b= uffer - port 1 May 20 12:46:36 gideon kernel: drivers/usb/serial/visor.c: visor_close - po= rt 1 May 20 12:46:36 gideon kernel: drivers/usb/serial/visor.c: visor_shutdown May 20 12:46:36 gideon kernel: visor ttyUSB0: Handspring Visor / Treo / Pal= m 4.0 / Cli=E9 4.x converter now disconnected from ttyUSB0 May 20 12:46:36 gideon kernel: visor ttyUSB1: Handspring Visor / Treo / Pal= m 4.0 / Cli=E9 4.x converter now disconnected from ttyUSB1 --VbJkn9YxBvnuCH5J-- --qcHopEYAB45HaUaB Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.2 (GNU/Linux) iD8DBQE+yZkNWb13Z/wY5sIRApa8AKCOOCp8El7sfxTNichrJ7rC7LTwKgCfSPKU laGw5Te1ZrpSGlEYHkpAC68= =JWkx -----END PGP SIGNATURE----- --qcHopEYAB45HaUaB-- _______________________________________________ clie-linux mailing list [email protected] http://kreucher.net/mailman/listinfo/clie-linux Sony Clié and Linux Homepage: http://kreucher.net/clie/