Re: synching sony clie nx60 with evolution 1.4.3

On Wed, Sep 03, 2003 at 04:42:57PM -0500, jforman wrote:
> so i followed all the steps on the kreucher.net page for syncing with a
> clie, and i'm missing one stupid step i cant remember. i'm running
> gentoo linux, 2.6.0-test4 kernel. using evolution 1.4.3 with a sony clie
> nx60. i can get it to sync and log into it using dlpsh but...i cant for
> the life of me get it to do the initial sync with evolution. i've tried
> the killing gpilotd daemon, and restarting it, etc and it just wont
> work. it seems everytime i try and nail down which /dev/usb/tts/# entry,
> it changes on the last sync. i've had it up to 6 and 7 and i cant get it
> syncing. 
> 
> snippet from /var/log/messages...
> Sep  3 16:07:10 tribeca kernel: usb 1-2: USB disconnect, address 8
> Sep  3 16:07:10 tribeca kernel: usbserial 1-2:0: device disconnected
> Sep  3 16:07:17 tribeca kernel: hub 4-0:0: debounce: port 4: delay 100ms
> stable 4 status 0x501
> Sep  3 16:07:17 tribeca kernel: hub 1-0:0: debounce: port 2: delay 100ms
> stable 4 status 0x101
> Sep  3 16:07:17 tribeca kernel: hub 1-0:0: new USB device on port 2,
> assigned address 9
> Sep  3 16:07:17 tribeca kernel: usbserial 1-2:0: Handspring Visor / Palm
> OS converter detected
> Sep  3 16:07:17 tribeca kernel: usb 1-2: Handspring Visor / Palm OS
> converter now attached to ttyUSB6 (or usb/tts/6 for devfs)
> Sep  3 16:07:17 tribeca kernel: usb 1-2: Handspring Visor / Palm OS
> converter now attached to ttyUSB7 (or usb/tts/7 for devfs)
> Sep  3 16:07:17 tribeca usb.agent: ... no modules for USB product
> 54c/da/100
> Sep  3 16:10:27 tribeca kernel: usb 1-2: USB disconnect, address 9
> Sep  3 16:10:27 tribeca kernel: visor ttyUSB6: Handspring Visor / Palm
> OS converter now disconnected from ttyUSB6
> Sep  3 16:10:27 tribeca kernel: visor ttyUSB7: Handspring Visor / Palm
> OS converter now disconnected from ttyUSB7
> Sep  3 16:10:27 tribeca kernel: usbserial 1-2:0: device disconnected
> 
> i'm concerned about the usb.agent line, how it cant find modules for the
> usb product. its clearly listed in the visor.h file.

But you've compiled the visor driver into your kernel, right?

And the device is already bound to the visor driver, so the hotplug call
doesn't really have anything to do :)

So in short, you don't have a problem.

thanks,

greg k-h

_______________________________________________
clie-linux mailing list
[email protected]
http://kreucher.net/mailman/listinfo/clie-linux

Sony Clié and Linux Homepage:
http://kreucher.net/clie/