Re: synching sony clie nx60 with evolution 1.4.3

pilot-xfer works perfect. i plug in the clie, hit hotsync while tail
-f'ing /var/log/messages, and just run pilot-xfer -b /tmp -p
/dev/usb/tts/3 (in this case it showed 3, sometimes its 1, sometimes i
keep trying and its 5, 7, 9, etc). pilot-xfer worked as directed. but
still, i cannot get it to sync with evolution.

just an excerpt from /var/log/messages:
Sep  8 13:09:17 tribeca kernel: visor ttyUSB2: Handspring Visor / Palm
OS converter now disconnected from ttyUSB2
Sep  8 13:09:17 tribeca kernel: visor ttyUSB3: Handspring Visor / Palm
OS converter now disconnected from ttyUSB3
Sep  8 13:11:00 tribeca kernel: usb 2-2: USB disconnect, address 23
Sep  8 13:11:00 tribeca kernel: usbserial 2-2:0: device disconnected
Sep  8 13:11:02 tribeca kernel: hub 1-0:0: debounce: port 4: delay 100ms
stable 4 status 0x501
Sep  8 13:11:02 tribeca kernel: hub 2-0:0: debounce: port 2: delay 100ms
stable 4 status 0x101
Sep  8 13:11:02 tribeca kernel: hub 2-0:0: new USB device on port 2,
assigned address 24
Sep  8 13:11:02 tribeca kernel: usbserial 2-2:0: Handspring Visor / Palm
OS converter detected
Sep  8 13:11:02 tribeca kernel: usb 2-2: Handspring Visor / Palm OS
converter now attached to ttyUSB2 (or usb/tts/2 for devfs)
Sep  8 13:11:02 tribeca kernel: usb 2-2: Handspring Visor / Palm OS
converter now attached to ttyUSB3 (or usb/tts/3 for devfs)
Sep  8 13:11:03 tribeca usb.agent: ... no modules for USB product
54c/da/100
Sep  8 13:11:14 tribeca kernel: visor ttyUSB4: Handspring Visor / Palm
OS converter now disconnected from ttyUSB4
Sep  8 13:11:14 tribeca kernel: visor ttyUSB5: Handspring Visor / Palm
OS converter now disconnected from ttyUSB5


i have pilot link 0.11.7, just upgraded to 0.11.8 and pilot-xfer works
great. but for the life of me cant get it to play nice with evolution.
if anyone can assist me on this, i am going to try and boot back into
2.4.20 w/ visor patch and see if that works. the gpilotd restart fix, or
anything i'm missing is greatly appreciated.

tia,
jeff

On Mon, 2003-09-08 at 10:56, Greg KH wrote: 
> On Sun, Sep 07, 2003 at 10:38:54PM -0500, jforman wrote:
> > 
> > it works, but gpilot doesnt seem to be playing nice. any guidance you
> > can give me is greatly appreciated. do you know if the visor module is
> > confirmed to work in all the released 2.6 kernels?
> 
> Works for me (tm)  :)
> 
> Does pilot-xfer by itself work for you?  Try that to verify that it's
> not the kerneo or pilot-link messing up.  If that works, then move on to
> gpilot (but I've never used it so I'm not any help there...)
> 
> Oh, you do have the latest version of pilot-link from pilot-link.org,
> right?
> 
> thanks,
> 
> greg k-h
> 
> _______________________________________________
> clie-linux mailing list
> [email protected]
> http://kreucher.net/mailman/listinfo/clie-linux
> 
> Sony Cli and Linux Homepage:
> http://kreucher.net/clie/


_______________________________________________
clie-linux mailing list
[email protected]
http://kreucher.net/mailman/listinfo/clie-linux

Sony Clié and Linux Homepage:
http://kreucher.net/clie/