Re: ipaQ H2200 + CF card

Hi,

Thanks for the input, I tried that, but still nothing...
I don't think there's something wrong with my ext2 partition or my
image; I tried with the /boot image, I re-partitionned and re-formated
twice, and since I sent that log file, I replaced Haret-0.5.1 with the
last one (haret-20080726f.exe) from
http://handhelds.org/~koconnor/haret/.

I don't know what else to try...

Clovis


On 8/26/08, Fafler <[email protected]> wrote:
> I had to set rootdelay to 20. I don't think it's really necessary to go that
> high, but i rarely reboot the iPaq, so i don't mind waiting.
>
>
> On 8/26/08, Clovis C <[email protected]> wrote:
> >
> > Hi all,
> > I'm having a problem booting my H2200 from a CF card using the
> > two-partition procedure described here:
> > http://handhelds.org/moin/moin.cgi/CardBoot.
> > When I run haret.exe I see a few lines on the console, the last of
> > which is "Jumping to kernel", then the screen goes invariably blank
> > with everything I try.
> > I enabled early logging, my log file is included hereafter, any help
> > would be much appreciated!
> > Clovis
> >
> >
> > ===== HaRET 0.5.1 =====
> > Setting KMode to true.
> > Old KMode was 1
> > Finished initializing output
> > Loading dynamically bound functions
> > Function '?GXOpenDisplay@@YAHPAUHWND__@@K@Z' in library
> 'gx' at 0387122C
> > Function '?GXCloseDisplay@@YAHXZ' in library 'gx' at 038715EC
> > Function '?GXBeginDraw@@YAPAXXZ' in library 'gx' at 03871674
> > Function '?GXEndDraw@@YAHXZ' in library 'gx' at 0387176C
> > Function 'LoadLibraryExW' in library 'coredll' at 01F72068
> > Function 'GetSystemPowerStatusEx2' in library 'coredll' at 01F77920
> > Function 'SleepTillTick' in library 'coredll' at 01F71EFC
> > Function 'AllocPhysMem' in library 'coredll' at 01F71E04
> > Function 'FreePhysMem' in library 'coredll' at 01F71E8C
> > Function 'CreateToolhelp32Snapshot' in library 'toolhelp' at 02611088
> > Function 'Process32First' in library 'toolhelp' at 02611148
> > Function 'Process32Next' in library 'toolhelp' at 026111B0
> > Function 'Module32First' in library 'toolhelp' at 02611338
> > Function 'Module32Next' in library 'toolhelp' at 026113AC
> > Function 'CloseToolhelp32Snapshot' in library 'toolhelp' at 0261108C
> > Unable to load library 'ace_ddi'
> > Unable to load library 'ace_ddi'
> > Unable to load library 'ace_ddi'
> > Unable to load library 'ace_ddi'
> > Unable to load library 'ace_ddi'
> > Unable to load library 'ace_ddi'
> > Unable to load library 'ace_ddi'
> > Unable to load library 'ace_ddi'
> > Detecting memory
> > WinCE reports memory size 67108864 (phys=29941760 store=29868032)
> > Detecting current machine
> > Trying to detect machine (Plat='PocketPC' OEM='hp iPAQ h2200')
> > Wince reports processor: core=Intel(R) name=PXA255 cat= vend=INTEL
> > Looking at machine Alpine
> > Looking at machine Apache
> > Looking at machine AximX50
> > Looking at machine AximX5
> > Looking at machine Beetles
> > Looking at machine Blueangel
> > Looking at machine Himalaya
> > Looking at machine Magician
> > Looking at machine Universal
> > Looking at machine H1910
> > Looking at machine H1940
> > Looking at machine H2200
> > Registering command IGPIO
> > Registering command WG|PIO
> > Registering command GPLR
> > Registering command GPDR
> > Registering command GAFR
> > Registering command GPIO
> > Registering command GPIOST
> > Registering command LOADLIBRARYEX
> > Registering command TRACES
> > Registering command RESUMETRACES
> > Registering command WI|RQ
> > Registering command TRACE
> > Registering command TRACEMASK
> > Registering command TRACE2
> > Registering command TRACETYPE
> > Registering command TRACE2TYPE
> > Registering command TRACEFORWATCH
> > Registering command INSN
> > Registering command INSNREENABLE
> > Registering command INSNREG1
> > Registering command INSNREG2
> > Registering command INSN2
> > Registering command INSN2REENABLE
> > Registering command INSN2REG1
> > Registering command INSN2REG2
> > Registering command ALTL1TRACE
> > Registering command MAXL1TRACE
> > Registering command MAXL1TRACERESUME
> > Registering command MMUTRACE
> > Registering command TRACEIGNORE
> > Registering command PERMISSIVEMMUTRACE
> > Registering command KILL
> > Registering command PS
> > Registering command LSMOD
> > Registering command ADDR2MOD
> > Registering command AC97
> > Not registering command ATIDBG
> > Initializing for machine 'H2200'
> > HaRET(1)# set ramaddr 0xa0000000
> > HaRET(2)# addlist IRQS p2v(0x40D00000) 0x7f 32 0
> > HaRET(3)# addlist IRQS p2v(0x40E00048) 0 32 0
> > HaRET(4)# addlist IRQS p2v(0x40E0004c) 0 32 0
> > HaRET(5)# addlist IRQS p2v(0x40E00050) 0 32 0
> > HaRET(6)# addlist GPIOS p2v(0x40E00000)
> > HaRET(7)# addlist GPIOS p2v(0x40E00004)
> > HaRET(8)# addlist GPIOS p2v(0x40E00008)
> > HaRET(9)# addlist GPIOS p2v(0x40E0000C)
> > HaRET(10)# addlist GPIOS p2v(0x40E00010)
> > HaRET(11)# addlist GPIOS p2v(0x40E00014)
> > HaRET(12)# addlist GPIOS p2v(0x40E00054)
> > HaRET(13)# addlist GPIOS p2v(0x40E00058)
> > HaRET(14)# addlist GPIOS p2v(0x40E0005c)
> > HaRET(15)# addlist GPIOS p2v(0x40E00060)
> > HaRET(16)# addlist GPIOS p2v(0x40E00064)
> > HaRET(17)# addlist GPIOS p2v(0x40E00068)
> > Welcome, this is HaRET 0.5.1 running on WindowsCE v4.20
> > Minimal virtual address: 00010000, maximal virtual address: 7FFFFFFF
> > Detected machine H2200/PXA (Plat='PocketPC' OEM='hp iPAQ h2200')
> > CPU is Intel XScale ARM arch 5TE revision 3 product 16 stepping 6
> > running in system mode
> > Enter 'HELP' for a short command summary.
> >
> > Running WSAStartup
> > Starting gui
> > In initdialog
> > Found machine H2200
> > executing startup.txt
> > HaRET(1)# set KERNEL zImage
> > HaRET(2)# set MTYPE 341
> > HaRET(3)# set CMDLINE "root=/dev/hda2 rootdelay=5
> > console=ttys0,115200n8 console=tty0"
> > HaRET(4)# bootlinux
> > boot KERNEL=zImage INITRD=
> > Opening file zImage
> > boot params: RAMADDR=a0000000 RAMSIZE=04000000 MTYPE=341
> > CMDLINE='root=/dev/hda2 rootdelay=5 console=ttys0,115200n8
> > console=tty0'
> > Boot FB feedback: 1
> > Built virtual to physical page mapping
> > Allocated 345 pages (tags=47A00000/a369a000 kernel=47A01000/a3699000
> > initrd=47B55000/a3545000 index=47B55000/a3545000)
> > Built kernel tags area
> > Built page index
> > Video buffer at 8FC42000 sx=240 sy=320 mx=60 my=53
> > Video Phys FB=04042000 Fonts=a3543064
> > preload=2264@47B58000/a3542000 sj=47B58000 stack=47B56000/a3544000
> > data=47B57000/a3543000 exec=a3542128
> > Reading 1390316 bytes...
> > Read complete
> > Launching to physical address a3542010
> > Trampoline setup (tram=136@000241C0/200241c0/a031c1c0)
> > MMU setup: mmu=B00B0000/a02b0000
> > Go Go Go...
> > _______________________________________________
> > The Familiar Linux Distribution
> > Familiar mailing list
> > [email protected]
> > https://handhelds.org/mailman/listinfo/familiar
> > irc://irc.freenode.net #familiar
> >
>
>
>
> --
> Lasse Jensen (fafler at gmail dot org)
_______________________________________________
The Familiar Linux Distribution
Familiar mailing list
[email protected]
https://handhelds.org/mailman/listinfo/familiar
irc://irc.freenode.net #familiar